GE/GE_Thumb/00115410i02.gif
See part 290 in the diagram
Replacing your General Electric Range Bake Element - Push On Terminals - 240V play video
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Bake Element - Push On Terminals - 240V

★★★★★
★★★★★
77 Reviews
$ 110.17   In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS249238
Manufacturer Part Number WB44K10005
Manufactured by GE
Product Description

Bake Element - Push On Terminals - 240V Specifications

The bake element is located on the bottom of the oven. If your oven will not heat properly it may be due to a faulty or damaged baking element. If you can see that the element has been separated or blistered, you should replace the part immediately. If there is no visible damage, turn the oven on and check to see if the element heats evenly. If the element is not heating evenly, or if it is not heating at all, it will need to be replaced. This element is 19 inches wide x 19 inches long, and has male spade push on terminals.
How Buying OEM Parts Can Save You Time and Money play video

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Little to no heat when baking | Element will not heat | Oven not heating evenly | Will Not Start
This part works with the following products:
Range.
This part works with the following products:
General Electric, Hotpoint, Kenmore.
Part# WB44K10005 replaces these:
AP2030964, 824269, WB44K10005, WB44K10001
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

28 questions answered by our experts.
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Renee
December 17, 2019
Heating element burned out. How do i replace?
For model number rb75w c4ww
Hello REnee and thanks for writing. urn off breaker to the oven. Unplug the oven’s plug from the electrical outlet. Open the oven and remove the racks so you can access the back of the oven. Locate the terminals that hold the bad element to the back of the oven. Carefully slightly lift the element and pull towards you . element in place in different areas so check Carefully slide the element out about 4 to 5 inches. Take the old element completely out of the oven. Put the new element into the oven and secure the prongs to the 2 electrical connectors the same way by gently pushing them in Slide the element back into the opening where it secures to the oven back wall. Plug in your oven and turn the ovens electrical breaker to “ON”. Test the oven by putting it on bake mode and check to be sure it is heating properly. The baking element may smoke a little as the manufacturer adds some protective coating to it. Don’t worry as this is normal and the coating will burn off within a few minutes. If test is successful, you have installed the element correctly. Job well done! We hope this helps. Please contact us anytime.

11 people found this helpful.

Was this helpful?
Thank you for voting!
James
January 11, 2018
When removing the burnt out coil, the black wire retracted into the opening. We can see the wire but are not able to get the wire out.Can you please help?
For model number RB787BH1BB
Hi James, Thank you for the question. You will need to remove the back panel from the appliance to access the wire. Hope this helps!

6 people found this helpful.

Was this helpful?
Thank you for voting!
David
December 4, 2017
How far apart are the terminals measured from center to center?
Hello David, Thank you for your inquiry. The terminals measure 3 inches apart. Hope this helps!

3 people found this helpful.

Was this helpful?
Thank you for voting!
Susan
June 5, 2019
Could you tell me the dimensions of this part
For model number C970 47121-3 Kenmore wall oven
Hello Susan, thank you for your question. This Bake Element is 17.25" wide, from side to side at the widest spot, and 15.5" long, from the mounting bracket to the back.

3 people found this helpful.

Was this helpful?
Thank you for voting!
N
August 19, 2019
Do the support clips come with it? What is estimated shipping fee?
For model number RB790WK1WW
Hello, Thank you for the question. Yes the clips or legs attached to the bottom of the element to hold it up off the floor of the oven are included. The three shipping methods will be listed during the check out. Hope this helps!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Ryan
September 24, 2019
Baking element is sparking when the oven is turned on. Does this mean the element is bad or is there another problem?
For model number RB526H3WW
Hi Ryan, Thank you for your question. Overtime, the heat produced degrades the insulation in the element and once it wears out the element will start to spark and burn out and it will need to be replaced. I hope this helps. Thank you and have a great day!

2 people found this helpful.

Was this helpful?
Thank you for voting!
James
January 12, 2018
While trying to retract the wire from inside of the back of the range, we pulled some of the insulation out, does this need to be replaced?
For model number RB787BH1BB
Hello James, Thank you for your inquiry. Yes, it would be advisable to replace the insulation as it protects the inner components of the oven. Hope this helps!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Lori
November 17, 2019
I ordered part wb44k10005 but now realize i need screw on terminals. Can you tell me what the correct part number is and how i can return the wrong one? Thank you.
For model number J325A1WH
Hello Lori, thank you for writing. The compatible replacement Bake Element for your model range is part number PS249483. If you have an order with our company and need to speak about that, you will have to contact our customer service by phone at 1-888-260-4310, or by email at customerservice@partselect.com. Thank you!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Bill
December 9, 2019
I would like to change bake element myself. Aside from turning off beaker and pulling plug. Is there any reason i should not try this.
For model number RB787C H1CC
Hello Bill and thanks for writing. No, as long as you turned off the breaker you should be ok it is a fairly easy task. For your convenience, we have attached the link to our repair video. We hope this helps. Good luck with your repair https://www.youtube.com/watch?v=7JuJFFInWI4&feature=emb_title

2 people found this helpful.

Was this helpful?
Thank you for voting!
George
March 13, 2020
Will i be able to return this baking element if it don't work or fit? This is a Hotpoint stove
For model number RB75BH1WH
Hello George, thank you for your question. Unfortunately, if the part is used or shows signs of installation we are unable to accept it back for resale. Per the model information the bake element PartSelect Number: PS249238 is the correct replacement. If the broil element works, and all other functions on the stove work, except this element that is the most likely issue and will fix the problem when installed. I hope this helps.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Part Videos

Replacing your General Electric Range Bake Element - Push On Terminals - 240V

Replacing your General Electric Range Bake Element - Push On Terminals - 240V play video
Customer Repair Stories
 Average Repair Rating: 4.3 / 5.0, 36 reviews. What's this?
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Lower bake Element would not heat.
First I slid the stove out and unpluged it, then removed two screws,slid out element, disconected two wires, slid new element in to place, pluged two wires in ,put into place and installed two screws, pluged stove back in, and turned on to try. Works perfect.
  • Ronald from Nassau, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Pliers
211 of 225 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken heating element
1)Turn off power to stove
2)remove 2 bolts holding heating element
3)pull element out of the back of the oven about 8" so that the wire connects is visable
4)pull wire clips off of heating element and remove element from the oven
5)put wire clips on the new heating element
6)push new heating element back into the holes in the back of the oven
7)screw botls back into the oven holding the heating element in place
8)Turn power back on
  • Paul from anna, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers
69 of 75 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven Element had burned out
My husband did it, we unplugged the stove first then he removed the damaged element replaced it with the new plugged it back in and we were in buisness. I like that this was an acutual part for my stove(not some universal thing) and it arrived very quickly.
  • Jeanette from Salem, IA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers, Socket set
18 of 20 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Lower Element Quit Working
I spent more time turning off the breaker and opening the door than replacing the element.

Nut driver to remove the 2 screws, NN Pliers to remove the leads, remove the element and reverse the process.

Hope this isn't copyrighted..... so easy, a caveman could do it!
  • Frank from Sasakwa, OK
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
11 of 12 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
My son was cooking and saw a flash through the oven door.
Followed the instructions online, very simple, quick and painless.
  • Bryson from Eagle River, AK
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Socket set
11 of 13 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The bake element burned out
First I unpluged the unit from the recepticle, then unscrewed the back panal from the oven. I removed the to wire connections from the bake element and then removed the two screws from the element itself. I removed the element and did exactly the sae in reverse to install the new unit.
  • Phillip from Raymond, OH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
9 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The oven was not getting very hot because the bake element had stopped working (broiler element was fine).
I turned off the breaker to the stove, took the oven racks out, used my pliers to remove the nuts that hold the bake element in place, then used the pliers to disconnect the old element from the wires in the back of the stove. Connected the new element, screwed the nuts back in, flipped the breaker back on, and turned on the oven. Ten minutes, tops.
  • Linda from Bella Vista, AR
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers
6 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
the bake element broke
First I removed the 2 screws and removed the bake element, replaced the new one
  • Daniel from Apex, NC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
5 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
every thing went great
every thing went great
  • CLYDE from SAINT PETERSBURG, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Socket set
5 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The bake element quit working.
First I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires. I then connected the wires to the new element and reinstalled the two screws. A brief test showed the element worked and that was it.
  • Wiley from Port Orchard, WA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
5 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer Reviews
Average Rating:
★★★★★
★★★★★
77 Reviews
4.8
Filter By Rating:
  • 5 Stars
    68
  • 4 Stars
    7
  • 3 Stars
    0
  • 2 Stars
    1
  • 1 Star
    1
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Model Cross Reference
This part works with the following models:
PartSelect Number: PS249238
Manufacturer Part Number: WB44K10005
Brand
Model Number
Description
General Electric
137480
Range
General Electric
137481
Range
General Electric
15451-0
Range
General Electric
154510
Range
General Electric
155910
Range
General Electric
157710
Range
Kenmore
36261101000
Range
Kenmore
36261101001
Range
Kenmore
36261108000
Range
Kenmore
36261108001
Range
Kenmore
36261741000
Range
Kenmore
36261741001
Range
Kenmore
36261742000
Range
Kenmore
36261742001
Range
Kenmore
36261748000
Range
Kenmore
36261748001
Range
Kenmore
36262492000
Range
Kenmore
36262492001
Range
Kenmore
36262780100
Range
Kenmore
36262780101
Range
Kenmore
36262780102
Range
Kenmore
36262780103
Range
Kenmore
36262781000
Range
Kenmore
36262781001
Range
Kenmore
36262781002
Range
Kenmore
36262781003
Range
Kenmore
36262781004
Range
Kenmore
36262788000
Range
Kenmore
36262788001
Range
Kenmore
36262788002
Range

Get in touch, we're here to help!

Open until 1am EST

Contact Customer Service