247334-1-M-GE-WB36X10131 -Oven Lamp
Part Location Diagram of WB36X10131 GE Oven Lamp
See part 280 in the diagram
247334-1-S-GE-WB36X10131 -Oven Lamp 360 view
( Grid squares measure 1x1 inch )
247334-1-S-GE-WB36X10131 -Oven Lamp 247334-2-S-GE-WB36X10131 -Oven Lamp 247334-3-S-GE-WB36X10131 -Oven Lamp 247334-1-S-GE-WB36X10131 -Oven Lamp 360 view
Part Location Diagram of WB36X10131 GE Oven Lamp
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

customerservice@partselect.com

Oven Lamp WB36X10131

 Fits your JE1590WC01!
★★★★★
★★★★★
16 Reviews

Rated by 12 customers 

Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

$ 24.87
  In Stock
Get FREE EconoShip on orders over $100! T&C apply

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your JE1590WC01!
PartSelect Number PS247334
Manufacturer Part Number WB36X10131
Manufactured by GE
Product Description

Oven Lamp Specifications

This is a replacement oven lamp for your microwave. The base is made of black plastic, and the lamp itself is made of glass. The base is approximately 2 inches long and 1 inch wide. The bulb is located inside the microwave duct. You will need to remove the outer cover of your microwave to gain access to it. This part is sold individually and is an authentic OEM part sourced directly from the manufacturer.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Won’t turn on
This part works with the following products:
Microwave.
This part works with the following products:
General Electric.
Part# WB36X10131 replaces these:
AP2030108, 770520
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
16 Reviews
4.8
Filter By Rating:
  • 5 Stars
    15
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    1
Sort by:
  • 1
  • 2
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Russell S - May 24, 2023
  Verified Purchase
Microwave Lamp
I researched and found this item quickly on your site. This was for an older, built-in unit. Received the part fast and it fit perfectly.
★★★★★
★★★★★
Gail T - February 3, 2023
  Verified Purchase
microwave light
Fit perfect
★★★★★
★★★★★
Elvah T D - April 25, 2021
  Verified Purchase
Microwave Light Out
Received the part very quickly. Now we have to figure out how and where to install it!
★★★★★
★★★★★
Steve W - March 6, 2021
  Verified Purchase
Easy once you get the microwave taken apart.
Once I slid the top/side cover off, it was pretty easy, my model required a security torx bit (T-20) you probably need a second person to unplug the oven from the wall, mine was installed into the cabinet and surrounded by woodwork, it probably weighed 50-60 pounds so another person to help would make it easier. Be careful unplugging the bulb from the connection, I can see that if old enough the plastic plug into the bulb may be brittle. Also on my oven, the metal cover was fastened by a screw on the left side (if looking from the front) but the right side bottom had to be slid and somewhat pounded into place. My built in had a metal type frame that had to be taken off first, remember to re-install in the same direction since it is not the same both sides. I also tested the light before I did any re-assembly, works like new.
★★★★★
★★★★★
Phillip F - February 26, 2021
  Verified Purchase
Replacement part works fine
Part arrived quickly and in perfect condition. Replacement is a huge job due to the crazy design that requires you to dismantle the microwave. I think next time I'll do without a light.
★★★★★
★★★★★
Cecelia M - February 18, 2021
  Verified Purchase
Worked as expected
Fast delivery, correct part
★★★★★
★★★★★
Catherine B - December 19, 2020
  Verified Purchase
Fairly easy to install
Had my son-in-law help and only needed a particular drill bit but all went well. Bulb arrived on time and well packaged.
★★★★★
★★★★★
Billie L - August 12, 2020
  Verified Purchase
Correct part & quick to replace
Was part I needed and repairman replaced it easily.
★★★★★
★★★★★
Illona E - May 11, 2020
  Verified Purchase
Lamp
Do not know what to even try to open, do not know where it is at. Now we need a special tool to get to open it? No directions for this.?
★★★★★
★★★★★
John W - March 4, 2020
  Verified Purchase
Repair went great, googled the procedure before starting.
Part arrived quickly, and undamaged. Fit was petfect, and works great.
  • 1
  • 2
Back to Top
Customer Repair Stories
 Average Repair Rating: 3.1 / 5.0, 12 reviews. What's this?
Sort by:
  • 1
  • 2
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
bulb burned out
removed micro from cabinet, took off top piece and bottom piece, took off top and side piece to get to bulb. Removed bulb, replaced. Like someone said the engineers at GE should get an award for making an easy job very difficult.
  • Rusty from PHENIX CITY, AL
  • Difficulty Level:
    Very Difficult
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Interior light burned out.
Removed back screws, pulled cabinet off from the rear, unplugged lamp on upper right side in front reattached two wires, replaced 1 screw to hold lamp in place, reinstalled cabinet and done.

Actually followed prior instructions on your site. Spot on.
  • Cathy from COVINGTON, LA
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Microwave/Convection over lamp burnt.
Phillips screws out of the side; torx screws out of the bottom/back and slide the cover off of the back. The light is not visible but not hard to find: on the top left side mounted on a black plastic base with 1 phillips screw & stud holds other side. You can tell what the base looks like from the new part. GE probably wants you to call them to make the $-ha. Stay clear of any capacitors (shock) or chips (short) & touch the chassis to ground or if a tech, wear a ground strap.
Read less
  • gleason jay from ENCINITAS, CA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Microwave Oven Light Bulb Replacement
GE Profile Microwave Oven model JE1590. This microwave does not have an easy to replace bulb location and requires this custom bulb replacement part. The microwave cover must be removed to access the bulb replacement location. There are two black phillips screws on the right side of the microwave which must be removed and an additional 5 silver screws on the back. 2 of these screws are philips and 3 are tamper resistant torx, size TR20. If you do not have a TR20 you can either purchase an inexpensive bit set (recommended) or modify the screw heads with a Dremel (type) tool to allow them to be removed with a flat head screw driver. Once all the screws are removed, the oven cover will slide back and lift off. The bulb is located on the top, front, right side of microwave. There is a single philips head screw (pointing down) holding the bulb assembly in place. Remove the screw and the assembly lifts up. Gently slide the bulb connectors aways from the wires and replace with the new bulb. I recommend you wait to remove the old bulb until you have the replacement so you can see how the replacement will fit.
Read less
  • Tim from Levelland, TX
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
14 of 14 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replace Lamp Bulb in GE Profile Microwave
First went to Sears & got 'Security Torx' screw driver set for 8.99. Got set of 6 drivers that will fit on drill , this is what will open bottom 2 screws on rear of Microwave. The other screws on the microwave are Phillips head screws.
Then Unplug Unit put on firm surface and go to rear & side of unit & take off only screws on the perimeter of the case. Then take off screws on side of case. (only 1 side has screws) Then make sure you discharge your static electricity by touching some metal or using a grounding wire device (most of us Computer Tech's have). Then gently slide case off from under front tabs. Looking at the right side of the Microwave (front facing) you will see a plug sitting up with two screws. You will not see the bulb as it is inserted upside down in a cover which shields it. The bulb will have a 2 wire attachment shielded by a electric cable attachment. If you don't see it immediately, refer to the schematic under your case or refer to the diagram on this web site carefully. The bulb is there in plain view. After removing the two screws and re- attaching the power cable to the bulb. Re slide on the case cover and replace the screws. I kept my security Torx screws in place in case I ever need to go to a repair person for more serious service then replacing a bulb.
Read less
Other Parts Used:
Oven Lamp WAVE GUIDE
  • lenwood from Ruther Glen, VA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
28 of 32 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Microwave not cooking, interior light out
Traced problem to the door primary interlock microswitch.By the way this is the second time this switch has failed. Switch appears to fail after about 3 years. Replacing the lamp was bear.I have the SCA2000BCC03 advantium. It is almost impossible to replace the interior light. After removing from wall remove the case and the control panel disconnecting all of the wires. Gentley pull cavity outward giving you enough room to get an offset philips screwdriver on the single screw retaining the lamp. Its a bear but its possible to do and probably saves you $150 service charge. GE must have assembled the bulb unit before placing it into the unit. There is no simple way to replace the bulb. Maybe new units have easier access. My is 12 years old.
Read less
Other Parts Used:
Oven Lamp Primary Door Interlock Switch
  • kerry from La Crescenta, CA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
8 of 16 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Our microwave oven light failed
I found the right part the first time on PartSelect.
  • Charles from Santa Maria, CA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
6 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Lamp Burned Out
The cabinet must be removed. Lamp is not accessable from inside the oven. They tried to make it difficult by putting two Torx screws in the back. All the others are Phillips head.

Remove the cabinet screws then slide the cabinet off toward the back of the unit. Lamp is on the upper left looking at the unit from the back. The oval lamp base is secured by one Phillips screw. The connector was slightly difficult to remove from the lamp base but it came loose by spreading the plastic connector with a small screwdriver. Needlenose pliers would probably work.

Install the new lamp, replace the cabinet and it's done.
Read less
  • Lance from Ojai, CA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
21 of 21 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven lamp burned out
Replacing the lamp is a no brainer. Getting to it is another story. The company clearly does not want people mucking around inside the case. The two lower rear screws securing the case cover are none tamper screws requiring some kind of special driver. Plus they are hardened metal. Lacking the special tool I had to chisel them out. Add to that the fact that the case and cover are very soft metal and you can imaging the mess I had on my hands. Luckily in the aftermath I was able to straighten every thing out during reassembly and the damage does not show too much. Beware, this is not as easy a job as you might think.
Read less
  • Patrick from Bellevue, WA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
11 of 13 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Interior Light Burned Out
M/W mounted in wall so the hardest part was dismounting it and remounting it. That involved removing the frame, removing the top and bottom brackets, unplugging the unit and sliding it out. The repair was just removing about 10 sheet metal screws that held the metal case on and then unplugging the wires to the lamp and removing one screw that held the lamp in. That whole process in reverse puts it all back together.

Now the lamp works great when the M/W is in use or when the door is open. However, since it was a "Me" operation, I now have another problem. When the M/W is in use it is really quiet like maybe there is a fan not working. And after a medium to long use, the whole thing blacks out and cannot be used again until it all cools down. Once the display comes back on, you have to reset the clock and it's ready to go for the next usage.

I guess I either unhooked something or shorted something when I had the case open. Obviously I'll be taking it apart again soon.
Read less
  • William from Clovis, CA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
6 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
Back to Top
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

1 question answered by our experts.
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
John
September 18, 2017
Where is bulb located. How do you change ?
For model number JE1590SH02
PartSelect logo
Hi John, Thank you for your question. Your bulb is located inside of your duct. To replace it, you would have to remove the outer cover of your microwave. Once you do that, you should actually see the bulb right away. Good luck with your repair.

14 people found this helpful.

Was this helpful?
Thank you for voting!
  • 1
Back to Top
Model Cross Reference
This part works with the following models:
PartSelect Number: PS247334
Manufacturer Part Number: WB36X10131
Brand
Model Number
Description
General Electric
CEB1590SS1SS
Microwave
General Electric
CEB1590SS2SS
Microwave
General Electric
CEB1590SS3SS
Microwave - MICROWAVE
General Electric
JE1590B
Microwave - GE Microwave Model JE1590B Parts
General Electric
JE1590BC01
Microwave - Counter Top
General Electric
JE1590BH01
Microwave - Counter Top
General Electric
JE1590BH02
Microwave - Counter Top
General Electric
JE1590C
Microwave - GE Microwave Model JE1590C Parts
General Electric
JE1590CC01
Microwave - Counter Top
General Electric
JE1590CH01
Microwave - Counter Top
General Electric
JE1590CH02
Microwave - Counter Top
General Electric
JE1590S
Microwave - GE Microwave Model JE1590S Parts
General Electric
JE1590SC01
Microwave - Counter Top
General Electric
JE1590SH01
Microwave - Counter Top
General Electric
JE1590SH02
Microwave - Counter Top
General Electric
JE1590W
Microwave - GE Microwave Model JE1590W Parts
General Electric
JE1590WC01
Microwave - Counter Top
General Electric
JE1590WH01
Microwave - Counter Top
General Electric
JE1590WH02
Microwave - Counter Top
General Electric
PEB1590DM1BB
Microwave
General Electric
PEB1590DM1CC
Microwave
General Electric
PEB1590DM1WW
Microwave
General Electric
PEB1590DM2BB
Microwave
General Electric
PEB1590DM2CC
Microwave
General Electric
PEB1590DM2WW
Microwave
General Electric
PEB1590DMB
Microwave - GE Microwave Model PEB1590DMB Parts
General Electric
PEB1590DMC
Microwave - GE Microwave Model PEB1590DMC Parts
General Electric
PEB1590DMW
Microwave - GE Microwave Model PEB1590DMW Parts
General Electric
PEB1590SM1SS
Microwave
General Electric
PEB1590SM2SS
Microwave
Back to Top
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

Contact Customer Service
Oven Lamp
$ 24.87
  In Stock
✖
Stock Status
 In Stock

Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.

If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.

 On Order

Item is not in stock and usually ships 3-5 business days from the time you place your order.

 Special Order

Item is not in stock and usually ships 10-15 business days from the time you place your order.

 NLA - No Longer Available

This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.