244785-1-M-GE-WB32X5060 -Porcelain Drip Bowl - 8"
Part Location Diagram of WB32X5060 GE Porcelain Drip Bowl - 8
See part 158 in the diagram
( Grid squares measure 1x1 inch )
244785-1-S-GE-WB32X5060 -Porcelain Drip Bowl - 8" 244785-2-S-GE-WB32X5060 -Porcelain Drip Bowl - 8" 244785-3-S-GE-WB32X5060 -Porcelain Drip Bowl - 8" Part Location Diagram of WB32X5060 GE Porcelain Drip Bowl - 8
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

customerservice@partselect.com

Porcelain Drip Bowl - 8" WB32X5060

★★★★★
★★★★★
2 Reviews

Rated by 3 customers 

Really Easy 

Less than 15 mins 

Ratings submitted by customers like you who bought this part.

$ 17.52
  In Stock
Get FREE EconoShip on orders over $100! T&C apply

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS244785
Manufacturer Part Number WB32X5060
Manufactured by GE
Troubleshooting
This part works with the following products:
Range, Microwave Oven Combo.
This part works with the following products:
General Electric, Hotpoint, Kenmore.
Part# WB32X5060 replaces these:
AP2028280, 2613, 340527, WB32X5052, WB32X5052A, WB32X5060R
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
2 Reviews
3.0
Filter By Rating:
  • 5 Stars
    1
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    1
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Larry S - October 16, 2021
  Verified Purchase
Very easy install
Looks great, perfect fit
★★★★★
★★★★★
Laura S - June 29, 2018
  Verified Purchase
wrong part
The parts you recommended were incorrect. I already sent an email and got no reply. I would like to exchange the drip bowls I received for two 6" burner bowls #244398 and two 8" burner bowls #244399. Please let me know how to process the return. My order number is #11139259.Thank you!
PartSelect logo
July 5, 2018
Hello, Thank you for leaving a review on the . Sorry it had taken us so long to get back to you. We have been a bit more popular then normal and are now able to check our reviews. Checking the order I am showing you have already contacted us to address the issue. Please let us know if there is anything else we can assist you with.
  • 1
Back to Top
Customer Repair Stories
 Average Repair Rating: 4.8 / 5.0, 3 reviews. What's this?
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Small elements were losing heating power and large elements did not work.
I unplugged each element from the terminal it was plugged into and then plugged the new element in. I also replace the drip pans and trim rings while I was at it.
Other Parts Used:
Porcelain Drip Bowl - 8" Porcelain Drip Pan - 6" Trim Ring - 8 Inch Trim Ring - 6 Inch Surface Element - 8 Inch - 2350W Surface Element - 6 Inch - 240V
  • Joseph from Guilford, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Element would not heat to max temp.
The interesting part of this story was troubleshooting the problem. Was it the element or the control? Turns out the element was making poor contact, generating excess heat ,which corroded the element contact generating even more heat, and so on and so on until the termional block eventually broke. The repair itself was simple once I separated the element from the terminal block. After that I removed the terminal block, one screw, removed the connecting wires, two screws, reversed the procedure to install the the new terminal boplck and element. Before the whole process began I made sure to turn the breaker to OFF.
Read less
Other Parts Used:
Porcelain Drip Bowl - 8" Porcelain Drip Pan - 6" Trim Ring - 8 Inch Trim Ring - 6 Inch 8 Inch Surface Burner Element Terminal Block Assembly
  • Alfred from East Northport, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Burners Heated Irratically
1. Pulled out drawer
2. Vacuumed dust, etc. under stove
3. Reached under stove to rear and pulled plug
4. Pulled the stove out away from wall so I could get to back
5. Removed 5 screws that retained the back of the control panel
6. One by one, I removed each wire from an old control and pushed it onto the same pin on the new control - did same for all 4 burner controls
7. Removed the knobs
8. Removed 2 screws from the front panel for each old control and removed the old controls
9. Pushed each of the new controls into place on the panel and reused screws to secure them in place
10. Cut the long control stems using 2 pliers per instructions to match length of old controls.
11. Used knob adapters provided to mate the old knobs to the new control stems
12. Plugged the stove in and tested the burners
13. Unplugged and replace the panel back with original screws
14. Moved stove back into place
15. The right front burner was the one most used, so I replaced the connector for that burner.
16. That connector came with instructions that I followed - cut the wires to the old connector, splice the wires to the new connector wires using supplied wire nuts and shrink tubing.
17. Plugged the stove back in
18. Replaced drawer - job complete - stove like new
Read less
Other Parts Used:
Porcelain Drip Bowl - 8" Porcelain Drip Pan - 6" Trim Ring - 8 Inch Trim Ring - 6 Inch INFINITE HEAT SWITCH KIT Terminal Block
  • HOWARD from WATERBURY, CT
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
14 of 19 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Back to Top
Questions and Answers

Be the first to ask our experts a question about this part!

Back to Top
You May Also Need ?
Surface Element - 6 Inch - 240V
$57.41
$57.41
  In Stock
Surface Element - 8 Inch - 2350W
$61.79
$61.79
  In Stock
Trim Ring - 6 Inch
$8.44
$8.44
  In Stock
Trim Ring - 8 Inch
$11.96
$11.96
  In Stock
Porcelain Drip Pan - 6"
$18.63
$18.63
  No Longer Available
Back to Top
Model Cross Reference
This part works with the following models:
PartSelect Number: PS244785
Manufacturer Part Number: WB32X5060
Brand
Model Number
Description
Kenmore
99121-8
Range - Kenmore Range/Stove/Oven Model 99121-8(1988) (991218(1988), 99121 8(1988)) Parts
Kenmore
99138
Range - Kenmore Range/Stove/Oven Model 99138 (1988) (99138(1988)) Parts
Kenmore
99141
Range - Kenmore Range/Stove/Oven Model 99141 (1988) (99141(1988)) Parts
Kenmore
99148
Range - Kenmore Range/Stove/Oven Model 99148 (1988) (99148(1988)) Parts
Kenmore
99151
Range - Kenmore Range/Stove/Oven Model 99151 (1988) (99151(1988)) Parts
Kenmore
99158
Range - Kenmore Range/Stove/Oven Model 99158 (1988) (99158(1988)) Parts
Kenmore
99221
Range - Kenmore Range/Stove/Oven Model 99221 (1988) (99221(1988)) Parts
Kenmore
99228
Range - Kenmore Range/Stove/Oven Model 99228 (1988) (99228(1988)) Parts
Kenmore
99241
Range - Kenmore Range/Stove/Oven Model 99241 (1988) (99241(1988)) Parts
Kenmore
99248
Range - Kenmore Range/Stove/Oven Model 99248 (1988) (99248(1988)) Parts
Kenmore
99258
Range - Kenmore Range/Stove/Oven Model 99258 (1988) (99258(1988)) Parts
Kenmore
99351
Range - Kenmore Range/Stove/Oven Model 99351 (1988) (99351(1988)) Parts
General Electric
GBSR1080A0WW
Washer
General Electric
GBSR1080A2WW
Washer
General Electric
JB400G*H1
Range - Electric
General Electric
JB400G*H2
Range - Electric
General Electric
JB400G*H3
Range - Electric
General Electric
JB400G*H4
Range - Electric
General Electric
JB400G*H5
Range - Electric
General Electric
JB400G*H6
Range - Electric
General Electric
JB400G*J1
Range - Electric
General Electric
JB400G*J2
Range - GE FREE-STANDING / DROP-
General Electric
JB400G*J3
Range - Electric
General Electric
JB400G*J4
Range - Electric
General Electric
JB400G*K1
Range - Electric
General Electric
JB400G*K2
Range - Electric
General Electric
JB400G0H1
Range - GE Range/Stove/Oven Model JB400G0H1 Parts
General Electric
JB400G0H2
Range - GE Range/Stove/Oven Model JB400G0H2 Parts
General Electric
JB400G0H3
Range - GE Range/Stove/Oven Model JB400G0H3 Parts
General Electric
JB400G0H4
Range - GE Range/Stove/Oven Model JB400G0H4 Parts
Back to Top
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

Contact Customer Service
Porcelain Drip Bowl - 8"
$ 17.52
  In Stock
✖
Stock Status
 In Stock

Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.

If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.

 On Order

Item is not in stock and usually ships 3-5 business days from the time you place your order.

 Special Order

Item is not in stock and usually ships 10-15 business days from the time you place your order.

 NLA - No Longer Available

This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.