Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Eliot D - August 20, 2022
Verified Purchase
Parts for our 1953 stove, cool!
Shiny!
★★★★★
★★★★★
Randy W - August 16, 2022
Verified Purchase
Great Part and Service
The drip bowls came super fast and was installed the same day.
★★★★★
★★★★★
Curtis W - March 9, 2021
Verified Purchase
My stove top looks brand new!
Not really, it is from 1978 after all, but it sure looks a lot better now. Parts fit perfectly, wished I found you guys 20 years ago!
★★★★★
★★★★★
Deloris L - July 21, 2020
Verified Purchase
Perfect part for my old stove.
This part was just what I needed. Easy to install and a perfect fit. The old stove looks like new.
★★★★★
★★★★★
Gwendolyn S - June 2, 2020
Verified Purchase
Replaced
Perfect fit.
★★★★★
★★★★★
Jill E - October 25, 2018
Verified Purchase
Perfect fit!
I was unable to find the correct size drip pan for my stove in a "new" apartment at the local stores, so I called you. Thank you so much for the assistance and finding the right part!
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 4.6 / 5.0, 34 reviews.
What's this?
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
the items ordered replaced the worn out ones.
the replacement items fit really good. It was a matter of remove and replace,
Oven Elment Burned Out. Drip Bowls andTrim Rings Severly Tarnished and Very Old. Timer Knobs Broken.
Cleaned oven. turned off power at breaker panel. Removed mounting screws and pulled out oven element 4 inches to expose electrical terminals. Removed terminal screws and removed burned out element being careful not to let wires go back into insulation. Reversed procedure to install new oven element. Slid out old trim rings and drip b
... Read moreowls after slightly tilting surface elements. Cleaned top of range and installed new rings and bowls. Removed broken timer knobs. New knobs would not push on to the metal shafts until the metal retainers remaining in the slots were pushed out using a small screwdriver.
replacing rusted drip pans on a 30 year old stove.
Just lifted the electric components Remove drip plans and trim rings and replaced with new drip pans and trim. Your company was incredible in there delivery of the parts..One day. You made my husbands very happy.
So this ancient stove we inherited when we bought our house had the drip bowls wrapped in tin foil. We've searched EVERY (not joking) store in our area for drip bowls that would fit it, but apparently Hotpoint wanted to make sure you could never do this - well, at least not easily. No one, not one store carries drip bowls to fit it. I fin
... Read moreally searched online and partselect.com came up first on the list. I was amazed they had the right part! Better yet, ordering was beyond easy, and they came super quick. Popped in the parts in less than 2 minutes, and we're good to go - makes this old stove look new! (well, if this was the 80's, lol) When I clicked on the part it said which stoves it would fit, which was also very helpful. Thank goodness for Part Select! Otherwise we would've had to rewrap those disgusting old bowls... I'd recommend this site in a heartbeat!
Both the eight inch burner and the the six inch burner were not an exact fit. I used the old rings and the new burners. The eight inch burner fit well with the new drip bowl;however, the six inch burner did not fit with the six inch drip bowl and I had to grind off about an eigth inch from the diamiter of the drip bowl. I replaced most al
... Read morel the wiriing and after I get the lower oven element rebuilt it will be ready for a test drive ..can't wait!
Old drip bowls and trim rings badly stained and dirty
It was so easy to find the correct items on your web site and they arrived in a very timely manner. Perfict fit. Now I know how to get parts when I need them.
turn off power at breaker. lift element from stove top lift out drip bowl . remove clips and ceramic cover. unfasten three wires. using new element install three wires to new burner ,clip on ceramic cover then slide burner back in to stove top and install drip bowl turn on power and test
I have tilt up burners on my Range, and decided to replace one that have finally rusted out the part that holds it in place. Repair was easy- installed according to the enclosed instructions. Parts arrived in good condition and very timely. A+
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
1 question answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Pascha
November 5, 2017
Hi, i have a Hotpoint electric range, the model number of the stove is rb5250j4ad and it has 3 small burners and one large burner.I need to replace the drip pan and ring on the large burner. i have selected the following replacements at your website: ps244479 and ps244680.
would you be able to confirm that these are the correct items for my model before i proceed with completing my order?
thank you.
best regards!
For model number RB525*J4
Hi Pascha,
Thank you for your question. Yes, those would be the correct parts for your appliance. Good luck with your repair!