This part is the replacement burner bowl seal or drip pan seal for your range. It is black in color and is sold individually. The burner bowl seal creates a seal between the cooktop and the drip pan and prevents spills from leaking between them. If the seal is broken or worn, it can allow spills to leak under the cooktop. To replace the seal, carefully remove it from under the drip pan, and fit the new seal into place. This is an OEM part sourced directly from the manufacturer.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Cooktop.
This part works with the following products:
Kenmore, General Electric.
Part# WB32M8 replaces these:
AP2634990, 258138, 344365, WB31K5060, WB32M0008
Customer Reviews
Average Rating:
★★★★★
★★★★★
3 Reviews
4.7
Filter By Rating:
5 Stars
2
4 Stars
1
3 Stars
0
2 Stars
0
1 Star
0
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Joseph D - October 29, 2018
Verified Purchase
Easy fix
All went well, took me some time to id my 28 year old appliance, we're back up and running
★★★★★
★★★★★
Ramon G - August 2, 2018
Verified Purchase
prefect fit!
received the correct part. worked perfectly. the gentleman that assisted me was awesome!
★★★★★
★★★★★
Joan P - May 23, 2018
Verified Purchase
Just what my stove needed
Arrived quickly, part fit perfectly stops the burner guard from moving around. Yes it is stapled together. Do not remove the staple
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.6 / 5.0, 5 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
No ignition
replace parts and plug in wire harness as you go.....clean up old seal area on burner bowl and stove top...install new seals.....done.....saved $400 in repair labor or $1200 for new stove top.....
1. Turn off gas and unplug cooktop 2. Use knife to score underneath glass cooktop 3. Remove burner grills and caps, remove knobs, remove rings to access 3 screws that hold drip bowls. 4. After removing drip bowls carefully lift up on glass cooktop (May have top use knife again to help release silicone ca
... Read moreulk) 5. Remove 2 screws with nut driver that hold the bracket that has the burner attached to it, very carefully tilt burner and bracket to access screws underneath, being careful not to kink gas line 6. Remove 1 screw and loosen the other to rotate bracket enough to access screw that holds igniter. 7. With new igniter installed replace bracket, turn gas on to check for leaks, you can also plug in power and check igniter. 8. Turn gas off and unplug power, turn glass cooktop over and clean old caulking off and recaulk, carefully replace cooktop and make sure holes are centered over burners and knobs. 9. While caulking is still fresh screw new drip bowls in place (May have to move top slightly to center bowls). 10. Once everything is back in place caulk around edge and turn gas and power back on.
Super easy, needed a screw diver and about 5 minutes per burner. (I replaced 4 each) Removed the 2 screws, disconnected and removed igniter. Put a new gasket on new burner bowl, reinstalled/connected igniter, installed the bowl with the 2 screws. Then I removed old knob and replaced with a new knob. New looking cooktop in about 2
... Read more0 minutes. The parts fit and look great.
Removed two screws, pulled out the igniter wire, removed a spring type wire holding the igniter to the bowl. Replace with new bowl, reconnected wire and placed new washer around bowl, placed back on stove top and screwed in place. Less than ten minutes to replace and only used a phillips screw driver.
Ask our experts a question about this part and we'll get back to you as soon as possible!
7 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Tammy
February 4, 2018
When ordering the seal/gasket for the burner bowls, is one of this product enough to do all four bowls or do I need to order a separate seal for each bowl?
For model number JGSP32GEV3BB
Hello Tammy,
Thanks for your question. The seal is sold individually.
I hope this helps.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Diana Pecc
March 28, 2019
Hi, that is the GE model number of our old black cooktop, is not made any longer. The rubbery seal disintegrated. Can you get us the part? The diameter of the burner is 9 in and is a gas cooktop. Thank you very much.
For model number JGP330EP
Hello Diana, thank you for inquiring. This is the correct replacement Burner Bowl Seal for your model.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Clay
May 28, 2019
I need to know if the GE burner seal (wb32m8) fits the large GE burner bowl (wb31k5076) (note: I am replacing on GE cooktop jgp336bed1bb). Thank you
For model number WB32M8
Hello Clay, thank you for your question. Yes, those two parts fit together for your model.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Bob
March 6, 2023
Will this gasket fit the burner bowl GE WB31K5079
Hello Bob, Thank you for the question. Yes, this Seal will work with the Burner Bowl. In order for us to locate the correct parts and repair information we will require the model number of the unit. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. We are looking forward to hearing from you!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Monika
June 30, 2021
Will this burner seal work with the large burner drip pan I need to replace both?
For model number JGP336BED1BB
Hello Monika, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS244608 and will work on All Burners. We hope this helps!
Was this helpful?
Thank you for voting!
Chris
March 11, 2022
Does this seal fit the burner bowls on my model?
For model number JGP336BEV2BB
Hello Chris, thank you for your question. Yes, the Number PS244608 you had chosen is compatible with your model. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.
Was this helpful?
Thank you for voting!
Anne
June 12, 2023
Does this bowl burner seal work with burner drip bowl #WB31K5078? Thanks!
For model number JGP636BED1BB
Hi Anne, thank you for your question. Yes, this burner seal, part number PS244608 is compatible with the burner bowl, part number PS244309. We hope this helps!
