Oven Elment Burned Out. Drip Bowls andTrim Rings Severly Tarnished and Very Old. Timer Knobs Broken.
Cleaned oven. turned off power at breaker panel. Removed mounting screws and pulled out oven element 4 inches to expose electrical terminals. Removed terminal screws and removed burned out element being careful not to let wires go back into insulation. Reversed procedure to install new oven element. Slid out old trim rings and drip bowls after slightly tilting surface elements. Cleaned top of range and installed new rings and bowls. Removed broken timer knobs. New knobs would not push on to the metal shafts until the metal retainers remaining in the slots were pushed out using a small screwdriver.
replacing rusted drip pans on a 30 year old stove.
Just lifted the electric components Remove drip plans and trim rings and replaced with new drip pans and trim. Your company was incredible in there delivery of the parts..One day. You made my husbands very happy.
So this ancient stove we inherited when we bought our house had the drip bowls wrapped in tin foil. We've searched EVERY (not joking) store in our area for drip bowls that would fit it, but apparently Hotpoint wanted to make sure you could never do this - well, at least not easily. No one, not one store carries drip bowls to fit it. I finally searched online and partselect.com came up first on the list. I was amazed they had the right part! Better yet, ordering was beyond easy, and they came super quick. Popped in the parts in less than 2 minutes, and we're good to go - makes this old stove look new! (well, if this was the 80's, lol) When I clicked on the part it said which stoves it would fit, which was also very helpful. Thank goodness for Part Select! Otherwise we would've had to rewrap those disgusting old bowls... I'd recommend this site in a heartbeat!
Took coil mounting assembly off first, then removed or took apart one piece at a time until heater coil was removed. Then installed (with furnished screws)the new coil, following entire process in reverse. 10-15 minutes time.
Old drip bowls and trim rings badly stained and dirty
It was so easy to find the correct items on your web site and they arrived in a very timely manner. Perfict fit. Now I know how to get parts when I need them.
I have tilt up burners on my Range, and decided to replace one that have finally rusted out the part that holds it in place. Repair was easy- installed according to the enclosed instructions. Parts arrived in good condition and very timely. A+
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
David
November 19, 2019
Do you have 2 6inch and 2 8inch chrome plated trim rings
For model number JSP27J
Hello David and thanks for writing.
Yes, we do 6 inch part # PS244475, 8 inch PS244479. If you wish to place an order with our company, you will have to contact our customer service. They also will be able to tell you about availability and shipping options and pricing. You can do so one of two ways: email: customerservice@partselect.com, or telephone: 888-738-4871. Thank you.
I'm looking for replacement burner rings and bowls. Not sure if your 8 in bowl is actually 8. The bowl on there now is 8.5. Please send part numbers for both large and small, bowls and rings asap. Thanks! Barb
For model number JBP220F3AD
Hello Barb and thank you for writing.
Large trim ring PS244479
Small trim ring PS244475
Small drip bowl PS244677
Large drip bowl PS244680
We hope this helps. Please contact us anytime if you require further assistance.
