See part 158 in the diagram
( Grid squares measure 1x1 inch )
Drip Bowl - 8 Inch
$
12.03
In Stock
In Stock
Get this part fast. Average delivery time via standard shipping: 1.8 days.
PartSelect Number PS244395
Manufacturer Part Number WB31T10011
Manufactured by
GE
Product Description
Drip Bowl - 8 Inch Specifications
This Drip Bowl, also known as a burner bowl or drip pan, is made to fit an element 8 inches in diameter and comes in chrome. The actual total diameter of this drip bowl is closer to 10 inches, but don't worry, it will fit your 8-inch burner. This bowl is used to catch drippings and food that falls when cooking on the oven element. The drip bowl might burn, become rusty, and wear down over time, and will need to be replaced. Replacing the drip pan is very easy. The elements on the oven must be removed to access the pan underneath. When replacing the bowl, make sure to line up the hole with the terminal block where the element plugs into, and always remove power to your appliance and ensure it is completely cool before commencing your repair. These drip bowls are sold individually, not as a set for your appliance, so you will need to purchase each separately if upgrading all the drip bowls for your range.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Range, Cooktop.
This part works with the following products:
General Electric, Kenmore, Hotpoint.
Part# WB31T10011 replaces these:
AP2028057, 770170, WB31T10011, 65975, WB32T10009, WB32X10014
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Erin
July 20, 2017
By the looks of the picture this drip bowl only has 1 slot, and my current one had three. Does that make a difference? Will it still work as well as my current one?
Hi Erin, based on your model the manufacturer has part number WB31T10011 listed as the 8-inch drip bowl for your range, and WB31T10010 as the 6-inch drip bowl. This is an original replacement part sourced directly from the manufacturer. It only needs 1 slot for the burner to fit through. The other legs are designed to rest on the lip at the edge of the pan. Please let us know if you have any further questions.
21 people found this helpful.
Was this helpful?
Thank you for voting!
Cam
July 20, 2017
This looks like the drip bowl I need but the wrong color, does it come in different colors?
Hello Cam, the drip bowl does come in black. If you are looking for the 8-inch drip bowl it is part number WB31T10015, and the 6-inch drip bowl is part number WB31T10014. I hope this helps!
10 people found this helpful.
Was this helpful?
Thank you for voting!
Cheyenne
July 20, 2017
I bought a used stove without drip bowls and I’m looking to replace them. How do I know what size bowls I need? Do I measure the element or the hole?
Hi Cheyenne, you will want to measure the opening at the top of the stove. It should be approximately 6 or 8 inches in diameter, regardless of the type of range. Please let us know if need any help finding elements or drip bowls suitable for your model!
5 people found this helpful.
Was this helpful?
Thank you for voting!
Stacey
November 26, 2017
This is the actual model number but when i go to look it up it gives a suggestion of a similar number but doesn’t include the “o” so how do i know if it’ll be the correct drip pans? I just need 2 of the large ones. Thank you
For model number Jsp26bod1ct
Hi Stacey,
Thank you for your inquiry. GE will sometimes remove the zeros from their model numbers. You model number now would be JSP26BD1CT. The part number for the 8 inch drip bowls is PS244395. I hope this helps. Thank you and have a great day!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Lisa
November 27, 2018
Hi, is your drip bowls quality similar to the original?
For model number JB350RF1SS
Hello Lisa, Thank you for the question. All the parts we sell are Original OEM parts. Thank you for your inquiry, good luck with this repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Sam
January 22, 2018
I'm looking for replacement drip pans for my GE oven/stove. The larger 8 inch has three prongs or locking slits and the smaller one, the 6 inch has 1. I purchased a set from home depot that said they would fit GE but the three slot 8 inch would not fit in the replacement drip pan that only ha one slot. Which ones will work?
For model number JBP35SD1SS
Hello Sam, Thank you for your inquiry. Part# WB31T10010 is the 6 inch drip pans, and part# WB31T10011 are the 8 inch drip pans that are listed as being compatible to the model number you supplied. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
ANN
February 7, 2018
Looking for an 8" drip tray for my GE stove. My element has 3 prongs on it. Just need to know where i can purchase a new 8" drip tray.
For model number JBS03C3WH
Hi Ann,
Thank you for your question. The part number listed under your model number for the 8 inch burner bowl is PS244395. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
Mark
April 8, 2018
The id of this stove, i purchased 8 inch drip pans, but they don't fit. The id of this is 8 1/2, are your pans 8 1/2 id to fit the burner element. Before i order new pans
For model number RB757DP1CT
Hi Mark,
Thank you for your question. According to your model information, these drip pans are the correct ones that GE lists for your model. So, according to the information we have in the part title, they would be eight inches and six inches. I hope that helps. Good luck with your repair.
Was this helpful?
Thank you for voting!
Related Parts:
Larry Rowland
December 12, 2019
Looking for the drip pans for this stove. Says parts are no longer available. Went to lowe’s and bought a universal pan kit but the 8 in doesn’t fit correctly. Any suggestions?
For model number JSP50GDN2BG
Hi Larry, sadly the requested part is discontinued, however you can contact the manufacturer to see if they have a suggested replacement. If they can provide you with a part number feel free to contact us back to see if we have the part in stock. Thank you for your question and good luck with your repair!
Was this helpful?
Thank you for voting!
Todd
November 5, 2017
Hello, i need new drip bowls. The outside diameter of them is 10" and 7 3/4". Thanks.
For model number Jmp31w0c2ww
HI Todd,
Thank you for your question. According to your model number you have two different sizes of drip bowls, 8" and 6". You have two of each. I actually have never see a drip bowl for an electric range that is of a bigger size than 8". This should be the correct bowl and I have listed the part information for your smaller bowl down below. Good luck with your repair.
Was this helpful?
Thank you for voting!
Related Parts:
Customer Repair Stories
Average Repair Rating: 5.0 / 5.0, 27 reviews.
What's this?
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Burner Bowl Needed Replaced
Removed burner element and put in bowl
-
Stephen from Knoxville, TN -
Difficulty Level:Really Easy -
Total Repair Time:Less than 15 mins -
Tools: -
519 of 679 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Burner bowls needed replacement
Very easy repair, Pulled burner coil out, removed old burner bowl. Put in new burner bowl, plugged burner coil back in... easy as 1,2,3
-
Tom from North Prairie, WI
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:
-
479 of 487 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Burned out block
Watched a repairman do it the last time for $200.00. This time I unplugged the stove, unscrewed four screw nuts holding the upper rear cover, unplugged old wires, reconnected new ones, fed them thru to the front, attached them to the new block, screwed the block into place, replaced back cover, stuck the element into place, made my little brother plug it back in and turn it on first. It worked. Cost me $20.00 to do what the repairman did the last time. I also replaced the reflector pans. No-brainer.
-
Americus from Pittsburgh, PA
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver
-
297 of 519 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
couldn't find correct burner bowls anywhere
very easy..pull out burner, slide new one in..like a plug.
none of the "replacement" burner bowls i found at
store like home depot/ bed bath and beyond and such didn't fit.. so much for universal sizing..
thank you parts select.
a very satisfied customer
none of the "replacement" burner bowls i found at
store like home depot/ bed bath and beyond and such didn't fit.. so much for universal sizing..
thank you parts select.
a very satisfied customer
-
Sheril from Rockaway, NJ
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:
-
241 of 465 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Burner bowls were rusty and unsalvageable. Surface element wasn't heating.
Removed all surface elements, threw away old burner bowls, put the 3 older surface elements back in place and inserted the new element.
The burner bowls look great. Now I won't wait so long to replace.
Thanks.
The burner bowls look great. Now I won't wait so long to replace.
Thanks.
-
Marguerite from Palm Harbour, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:
-
221 of 285 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The stove's bowl were burned and a mess.
Pulled out burner and put new bowls in. Looks like a new stove!
-
Martin from Tewksbury, MA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:
-
219 of 436 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replaced old drip bowls
Took 5 minutes to replace the 4 bowls. Ordered the bowls one day & they arrived the next day All went perfect.
-
John from Eowell, OH
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
-
217 of 435 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
bottom of heating element corroded
PartsSelect is the BEST!! This is the second time I've had to use them on home appliances. Their web site was easy to use, shipping was fast, prices competitive and instructions very easy to follow. I would not hesitate to use them again. Very happy with service from the get-go.
-
B. from Seattle, WA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:
-
66 of 128 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Simply replaced the drip pans. Came to realize that I had the skill set.
First dressed out with my hard hat, work gloves, dust mask then locked all the doors to prevent intruders from disturbing my concentration. During the installation took video for you tube broadcast and then invited friends and neighbors to witness the accomplishment! Made a sloppy soup to see how the drip pans worked. A+. Received quite a few back pats and atta boys. Most challenging aspect to this endeavor was unwrapping the packaging which was well done thank you. The whole experience left me refreshed and ready to take on the world! Thanks for asking!
-
Doug from HARRISVILLE, NH
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:
-
8 of 15 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
8" oven burner quit working - wouldn't heat up
Parts ordered from Part Select arrived 2 days! after being ordered even though we selected standard shipping.
Old generic poorly fitting bowls were removed, replaced with correct GE chrome bowls from Part Select, changed out 8" surface burner and it feels like we have a new stove! It looks great. All the surface burners fit perfectly into the new chrome bowls.
I will definately be using PartSelect. for all my appliance repairs.
Old generic poorly fitting bowls were removed, replaced with correct GE chrome bowls from Part Select, changed out 8" surface burner and it feels like we have a new stove! It looks great. All the surface burners fit perfectly into the new chrome bowls.
I will definately be using PartSelect. for all my appliance repairs.
-
Justin from Seattle, WA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:
-
6 of 8 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer Reviews
Filter By Rating:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Kraig H - December 15, 2020
You can't go wrong with PartSelect
Fast shipping, decent pricing, correct part, perfect fit. I won't shop elsewhere.
Richard R - November 18, 2020
drip oan
Unlike the multiple drip pans I've purchased over the last 6 years. this sit perfectly
Billie P - August 15, 2020
who knew?!
I knew you could buy new drip pans for your stove. I just never thought to buy any. but I had no idea you could buy new burners for same stove!!! I am obviously a sheltered old woman. I looked on PartSelect for my stove model number. did not exist, so I used the one closest to it. and by gumball, it worked!!!!! I now have shiny new drip pans and working burners on my very old stove!! the only problem is that the drip pans are so nice and shiny, I just hate to use them....don't want to get them dirty. thank you PartSelect!!
Michael P - August 15, 2020
Good replacement
Part fit as advertised.
EVELYN R - August 12, 2020
DRIP BOWLS
This replacement burner drip bowls fit perfectly! My stove looks like new!
Raymond V B - May 20, 2020
Perfect fit
The customer serviceman guided as to receive an actual perfect fit drill pan and guarantee the actual fit
Carol M - May 20, 2020
Replaced drip pan on ge stove top. Perfect fit.
New piece. Fit well on my stove. It's been difficult to replace. You did it!!
Gale S - May 19, 2020
Fits!!
Super fast service!! Came to my door so fast I couldn't believe it! Ordered 2 before to see if it fits (which it did) then ordered the other 2. I am so happy with product and service especially during these trying times. Bought others that didn't fit and wasted money. Thank you so much for a product that fits and makes my stove top look new.
Greg S - May 5, 2020
Easy replacement
Went in like it was supposed to had no problem. Second part I've bought from partselect and will CV continue to buy from them.
Kenneth S - May 5, 2020
Range repair
The parts we received were perfect! It makes our range look new again! Thank you for your service!
Related Parts
$17.86
Drip Bowl - 6 Inch
$17.86
PartSelect Number: PS244394
This drip bowl, also known as the drip pan or burner bowl, is 6 inches in internal diameter to match the burner, but actually measures closer to 8 inches in total diameter to its outer edges. This authentic manufacturer...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS244395
Manufacturer Part Number: WB31T10011
Manufacturer Part Number: WB31T10011
Brand
Model Number
Description