Part Location Diagram of WB30X253 GE Surface Burner - 8 Inch - 2100W
See part 375 in the diagram
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Surface Burner - 8 Inch - 2100W WB30X253

★★★★★
★★★★★
4 Reviews

Rated by 6 customers 

Really Easy 

15 - 30 mins 

Ratings submitted by customers like you who bought this part.

$ 63.08
  In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS244014
Manufacturer Part Number WB30X253
Manufactured by GE
Product Description

Surface Burner - 8 Inch - 2100W Specifications

This part is the replacement surface burner or element for your range. It is approximately 8 inches in diameter, and 2100 watts. The surface burner connects to the power source and when it is turned on, it heats up to cook your food. If you turn on the burner and the element does not heat up, it will need to be replaced. To complete this repair, first be sure to disconnect the power from your range, and ensure the burner is cool to the touch. Then, gently remove the burner from the terminals and replace it with the new one. This part is sold individually, and is an OEM part sourced directly from the manufacturer.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Element will not heat
This part works with the following products:
Range, Cooktop.
This part works with the following products:
Kenmore, General Electric, Hotpoint, RCA.
Part# WB30X253 replaces these:
AP2027813, 30, 325503, 4332859, 4334586, WB30X0253, WB30X5060, WB30X5095
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
4 Reviews
4.8
Filter By Rating:
  • 5 Stars
    3
  • 4 Stars
    1
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
Sort by:
  • 1
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
Customer Repair Stories
 Average Repair Rating: 4.4 / 5.0, 6 reviews. What's this?
Sort by:
  • 1
Sorry, we couldn't find any existing installation instruction that matched.
No Heat
Unplugged unit. Pulled 2 screws from bake element. Pulled terminals and screwed back in. On upper element you just pull the old one and push in the new.
Other Parts Used:
Bake Element Surface Burner - 8 Inch - 2100W
  • Tim from Coeur D Alene, ID
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The Heating Element's Contacts Were Burnout
Quite simple, just plug-in the new one
  • Manuel from Quakertown, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
0 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
coils with tips damaged
it was very easy, a few seconds and new range for a cuople of years more!
Other Parts Used:
Rolled Terminal Surface Unit - 6" - 1250W Surface Burner - 8 Inch - 2100W
  • Jose from The Woodlands, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Old unit was bent and didn't work properly
I unplugged the old unit and plugged in the new one! It works.
  • Christine from Danbury, NC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Large burner would not heat
I ordered the wrong part to start with. (READ CAREFULLY!) I reordered the correct part and it was simple. I unpluged the old element, plugged in the new one replaced the drip pan and trim ring and we were back cooking.
Service was fast, lady I spoke with on the phone to exchange parts was knowegable and nice. Great people to deal with.
  • Charles from Carthage, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
5 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Control switch did not function and one burner worked only occasionally
First, I used the PatrSelect website, which has great prices, and has helpful diagrams. Once I had all the parts, I worked with my wife to turn off the power at our home junction box. Next, I lifted off the cover over the control area of this range. I removed four nuts to lift out the panel that holds the four controls and the fan switch. I removed the wires from the broken controls, removed the two screws holding each control in place, then screwed the new ones in place. I would recommend trimming the posts on the controls to the correct size before screwing them in place, because it is easier to grip them and not bend them when they are not mounted. I reconnected the wires and replaced the panel. For the "receptacle", I followed the instructions provided regarding cutting the wire and placing the wire nut and heat shrink tubing. I opened the unit that houses the burners to get easy access.
Other Parts Used:
Drip Bowl - 6 Inch Drip Bowl - 8 Inch Rolled Terminal Surface Unit - 6" - 1250W Surface Burner - 8 Inch - 2100W INFINITE HEAT SWITCH KIT Receptacle Kit
  • Gregory from Princeton Junction, NJ
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
24 of 36 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

1 question answered by our experts.
Sort by:
  • 1
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Nancy
April 20, 2023
I recently purchased an 8" burner for this stove. It worked great, but now it heats up too hot, even when I have it on low or medium. What would cause this?
For model number 91193291790
PartSelect logo
Hello Nancy, thank you for your question. The 8 " Surface Burner Switch is likely the issue and is part PS236303. We look forward to hearing from you.

Was this helpful?
Thank you for voting!
Related Parts:
  • 1
You May Also Need ?
Model Cross Reference
This part works with the following models:
PartSelect Number: PS244014
Manufacturer Part Number: WB30X253
Brand
Model Number
Description
Kenmore
1034688610
Range
Kenmore
1036268412
Range
Kenmore
1036348412
Range
Kenmore
1036408710
Range
Kenmore
1039278412
Range
Kenmore
1039368410
Range
Kenmore
1039378410
Range
Hotpoint
107RC36B
Range - Hotpoint Range/Stove/Oven Model 107RC36B Parts
General Electric
22388L0
Range
General Electric
22388W0
Range
General Electric
24488L0
Range
General Electric
24488W0
Range
Kenmore
2784528811
Range
Kenmore
2784538811
Range
Kenmore
2784548811
Range
Roper
2872*0A
Range - Roper Range/Stove/Oven Model 2872*0A Parts
Kenmore
3636204190
Range
Kenmore
3636244190
Range
Kenmore
3636424190
Range
Kenmore
3639114190
Range
Kenmore
3639144190
Range
Kenmore
3639164190
Range
Kenmore
3639321191
Range
Kenmore
3639324190
Range
Kenmore
3639324590
Range
Kenmore
3639330193
Range
Kenmore
3639334190
Range
Kenmore
91104698680
Range
Kenmore
91104698690
Range
Kenmore
9114242090
Cooktop
Customer Service Representative

Get in touch, we're here to help!

Open until 1am EST

Contact Customer Service