Quick Question!

Have you ever purchased from PartSelect.com before?

244014-1-S-GE-WB30X253          -Surface Burner - 8" - 2100W
244014-1-S-GE-WB30X253          -Surface Burner - 8" - 2100W 244014-2-S-GE-WB30X253          -Surface Burner - 8" - 2100W 244014-3-S-GE-WB30X253          -Surface Burner - 8" - 2100W https://partselectcom.azureedge.net/Schematics/GE/00010095i02.gif

Surface Burner - 8" - 2100W

Your Price

$37.15
Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS244014
Manufacturer Part Number WB30X253
Manufactured by GE

This part works with the following brands: Kenmore, General Electric, Hotpoint.

This part works with the following products: Range, Cooktop, Microwave Oven Combo.

This part fixes the following symptoms:

  • Element will not heat.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Rolled Terminal Surface Unit - 6" - 1250W

Part Number 244015

$39.09
In Stock

Questions & Answers

Ask our experts a question on this part and we'll respond as soon as we can.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.4 / 5.0, 6 reviews What's this?
1-6 of 6
 

3 of 3 people found this instruction helpful

Parts Used:
  • Surface Burner - 8" - 2100W
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Nutdriver
Customer: Charles from Carthage, NY

Large burner would not heat

I ordered the wrong part to start with. (READ CAREFULLY!) I reordered the correct part and it was simple. I unpluged the old element, plugged in the new one replaced the drip pan and trim ring and we were back cooking.
Service was fast, lady I spoke with on the phone to exchange parts was knowegable and nice. Great people to deal with.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 1 people found this instruction helpful

Parts Used:
  • Surface Burner - 8" - 2100W
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Christine from Danbury, NC

Old unit was bent and didn't work properly

I unplugged the old unit and plugged in the new one! It works.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 2 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Jose from The Woodlands, TX

Coils with tips damaged

it was very easy, a few seconds and new range for a cuople of years more!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

6 of 17 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 30 - 60 mins
Tools: Nutdriver, Pliers, Screw drivers
Customer: Gregory from Princeton Junction, NJ

Control switch did not function and one burner worked only occasionally

First, I used the PatrSelect website, which has great prices, and has helpful diagrams. Once I had all the parts, I worked with my wife to turn off the power at our home junction box. Next, I lifted off the cover over the control area of this range. I removed four nuts to lift out the panel that holds the four controls and the fan switch. I removed the wires from the broken controls, removed the two screws holding each control in place, then screwed the new ones in place. I would recommend trimming the posts on the controls to the correct size before screwing them in place, because it is easier to grip them and not bend them when they are not mounted. I reconnected the wires and replaced the panel. For the "receptacle", I followed the instructions provided regarding cutting the wire and placing the wire nut and heat shrink tubing. I opened the unit that houses the burners to get easy access.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: Tim from Coeur D Alene, ID

No heat

Unplugged unit. Pulled 2 screws from bake element. Pulled terminals and screwed back in. On upper element you just pull the old one and push in the new.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 3 people found this instruction helpful

Parts Used:
  • Surface Burner - 8" - 2100W
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Manuel from Quakertown, PA

The heating element's contacts were burnout

Quite simple, just plug-in the new one

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-6 of 6

Model Cross Reference

This part works with the following models:

PartSelect Number: PS244014
Manufacturer Part Number: WB30X253
Brand Model Number Description
Kenmore1034688610Range
Kenmore1036268412Range
Kenmore1036348412Range
Kenmore1036408710Range
Kenmore1039278412Range
Kenmore1039368410Range
Kenmore1039378410Range
General Electric22388L0Range
General Electric22388W0Range
General Electric24488L0Range
General Electric24488W0Range
Kenmore2784528811Range
Kenmore2784538811Range
Kenmore2784548811Range
Kenmore3636204190Range
Kenmore3636244190Range
Kenmore3636424190Range
Kenmore3639114190Range
Kenmore3639144190Range
Kenmore3639164190Range
Kenmore3639321191Range
Kenmore3639324190Range
Kenmore3639324590Range
Kenmore3639330193Range
Kenmore3639334190Range
Kenmore91104698680Range
Kenmore91104698690Range
Kenmore9114242090Cooktop
Kenmore9114242091Cooktop
Kenmore9114242092Cooktop