243905-1-M-GE-WB30T10047 -Haliant Burner with Limiter - 6" - 1500W
Part Location Diagram of WB30T10047 GE Haliant Burner with Limiter - 6
See part 56 in the diagram
243905-1-S-GE-WB30T10047 -Haliant Burner with Limiter - 6" - 1500W 360 view
( Grid squares measure 1x1 inch )
243905-1-S-GE-WB30T10047 -Haliant Burner with Limiter - 6" - 1500W 243905-2-S-GE-WB30T10047 -Haliant Burner with Limiter - 6" - 1500W 243905-1-S-GE-WB30T10047 -Haliant Burner with Limiter - 6" - 1500W 360 view
Part Location Diagram of WB30T10047 GE Haliant Burner with Limiter - 6
Customer Service Representative

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Haliant Burner with Limiter - 6" - 1500W

★★★★★
★★★★★
5 Reviews

Rated by 8 customers 

Really Easy 

15 - 30 mins 

Ratings submitted by customers like you who bought this part.

$ 154.79
  In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS243905
Manufacturer Part Number WB30T10047
Manufactured by GE
Customer Service Representative

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Check if this fits your product and find model diagrams

Need help finding your model number?
Troubleshooting
This part fixes the following symptoms:
Element will not heat
This part works with the following products:
Range, Cooktop, Microwave Oven Combo.
This part works with the following products:
General Electric, Kenmore, Hotpoint.
Part# WB30T10047 replaces these:
AP2027789, 770141, WB30T10047, WB30K5033, WB30T10006
Back to Top
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

3 questions answered by our experts.
  • 1
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
George
December 5, 2017
The six inch burner will suddenly change to a high setting even though the switch indicates low. Is this an element problem or a switch. Not sure what controls the temp setting!
For model number JBP90GV1
PartSelect logo
Hi George, Thank you for the question. This would be a issue with the switch that controls the element. The switch will need to be replaced. Good luck with the repair!

6 people found this helpful.

Was this helpful?
Thank you for voting!
Robert
February 28, 2023
Is part ps243905 the left front element 6" 1500w for my range
For model number JBP65MK4BS
PartSelect logo
Hello Robert, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS243905 for the Left Front Burner. We are happy to be of assistance!

1 person found this helpful.

Was this helpful?
Thank you for voting!
John
September 8, 2021
Will part number wb30t10047 replace my left front burner
For model number Jbp67boh1wh
PartSelect logo
Hello John, thank you for your question. We have researched the model you have provided, and the part number PS243905 is the correct part for your left front burner. We hope this helps!

Was this helpful?
Thank you for voting!
  • 1
Back to Top
Customer Repair Stories
 Average Repair Rating: 4.5 / 5.0, 8 reviews. What's this?
  • 1
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Coil Burned Out
Open lid,un screw coil,pop in new coil snap holders in place,then cook a steak
  • Frank from St Augustine, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
60 of 91 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Heating element burned out.
Unplugged range. Opened oven door and removed two screws from top of oven opening. Lifted oven top and propped up
with a 2 x 3.Unscrewed the two screws that were holding
  • LANCE from ORELAND, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
41 of 62 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The small burner inside the double burner shortd out.
The first thing was to watch U-Tube . The replacement burner was being
replaced in a GE glass top range. Exter tools were required than depicted
in the U-Tube project. The project overall was not dificult for me however I was a general contracter for over 25 years
  • david from PORT ORANGE, FL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers, Socket set
5 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Small front burner on our glass top stove died.
Robert did not do the repairs. I did! 70 year old housewife. I watched a Utube video and thought I could certainly handle that. Ordered my part from your site. It came in two days. Burnet was replaced in under 20 minutes by me! Anyone can do this. Super easy, parts just plug in.
  • Robert from FLEMING ISLE, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Burner no longer heats
Remove two screws with nut driver that holds range top down. Turn off breaker or unplug before lifting top. Brace top with 2x4. Take picture with cell phone just in case. Orient replacement part with old burner. Remove one wire at a time and install on new burner in corresponding correcting terminal. be sure they are snug. Drop top install nuts . Test! Done! I am not an electrician!!!!!!!! Please do not publish !!!!
  • Anthony from Apopka, FL
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Burner burned out
Very easy. Unpluged range from outlet, took two screws from the front under side of the range top, raised cook top up, took off four wires from burner, removed two screws than holds burner on cook top, replaced with new burner, installed two screws that hold burner in place, installed the four wires to burner, lowered cook top back into place replaced two screws that hold cook top down, pluged back into outlet. DONE!
  • Daniel from Norborne, MO
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers, Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Burned out
Remove two screws to loosen the ceramic top....prop top open and change part...the part was exactly the same...change wires from one to the other and transfer clamps.....1st grade craft class would have done it in half the time I did......you folks have your parts inventory and description application to a science.....God Bless
  • Dean from Elkton, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
burner didn't work
lift stove top, 2 undermount screws. Then unplug 4 wires, I did them 1 at a time plugging into new burner as I go so I wouldn't screw up. Take 2 screws out of old burner to stove top, # all around circle put screws in same # on new burner.Done Good experience all the way around. Order delivery and install
  • Richard from Coon Rapids, MN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers, Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
5 Reviews
5.0
Filter By Rating:
  • 5 Stars
    5
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
  • 1
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
JOHN M - November 29, 2021
  Verified Purchase
Exact Match
Burner was well packaged. Instructions said it may not match original but it did. Cake install and voila, it works! So nice to have that front burner back!
★★★★★
★★★★★
Jonathan B - January 3, 2020
  Verified Purchase
Novice Makes Repair-Very competent telephone staff and all went well for a novice in repairs
Nice job by telephone staff in assisting me and all went well. Jon
★★★★★
★★★★★
Gale C W - February 19, 2019
  Verified Purchase
GE glasstop stove repair
The part was in great condition and my stove is back in order. The packaging was very loose, though. Very large box for smaller part.
★★★★★
★★★★★
Richard S - December 15, 2018
  Verified Purchase
Heating element
Easy install!
★★★★★
★★★★★
Sheree L - November 26, 2018
  Verified Purchase
Easy Repair
Received item super fast. Everything worked fine.
  • 1
Model Cross Reference
This part works with the following models:
PartSelect Number: PS243905
Manufacturer Part Number: WB30T10047
Brand
Model Number
Description
General Electric
10671-1
Range
General Electric
10671-2
Range
General Electric
10671-3
Range
General Electric
10771-1
Range
General Electric
10771-2
Range
General Electric
10771-3
Range
General Electric
10781-1
Range
General Electric
10785-1
Range
General Electric
10785-2
Range
General Electric
10785-3
Range
General Electric
10787-1
Range
General Electric
10791-1
Range
General Electric
10791-2
Range
General Electric
11791-2
Range
General Electric
11791-3
Range
General Electric
12661-1
Range
General Electric
12671-1
Range
General Electric
12771-1
Range
General Electric
12771-2
Range
General Electric
12781-1
Range
General Electric
12781-2
Range
General Electric
12785-1
Range
General Electric
12786-1
Range
General Electric
12787-1
Range
General Electric
12791-1
Range
General Electric
12891-1
Range
General Electric
12891-2
Range
General Electric
14786-1
Range
General Electric
157710
Range
General Electric
15781-0
Range
Back to Top
Customer Service Representative

Get in touch, we're here to help!

Open until 1am EST

Contact Customer Service
Haliant Burner with Limiter - 6" - 1500W
$ 154.79
  In Stock
✖
Stock Status
 In Stock

Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.

If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.

 On Order

Item is not in stock and usually ships 3-5 business days from the time you place your order.

 Special Order

Item is not in stock and usually ships 10-15 business days from the time you place your order.

 NLA - No Longer Available

This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.

Close