Large Haliant Burner with Limiter - 8" Specifications
This haliant burner element is a gneuine OEM replacement part for your stove. This element is 8 inches in diameter. The element lies underneath the stovetop, and will need to be replaced if it stops heating. To complete this repair you will need a 1/4 inch nut driver and a flat blade screwdriver. To access the element, open the oven door and unscrew the two screws under the lip of the cooktop.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Joseph D - October 5, 2023
Verified Purchase
Right part, but damaged
The ceramic gasket was broken into several pieces.
★★★★★
★★★★★
Mason H - February 7, 2019
Verified Purchase
Easy to install. Only had to remove 4 screws and switch the 4 wires to the new burner.
All parts were there. Plenty of packing to protect the burner during shipping. Very pleased.
★★★★★
★★★★★
Gene M - November 3, 2018
Verified Purchase
easy repair great part and worked as expected
the part was in great condition and worked as expected stove is back in working order
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.0 / 5.0, 5 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
No Instructions
Lots of jiggling until I found the screws to remove. After finally getting the top off the base there was the Instructions on a pamphlet taped to the bottom. The key tho get the top off is to remove the face and remove the proper screws( they are identifiable)unplug the electric plug 2 screws on the back sides and poof it is free!
Richard from FAYETTEVILLE, GA
Difficulty Level:
Difficult
Total Repair Time:
More than 2 hours
Tools:
Nutdriver, Pliers, Wrench (Adjustable)
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Heat element died
Very easy to replace. So easy even a man can do it.
Andrea Hines from ELGIN, AZ
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
2 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Large burner would not get hot
Repair was very simple. Removed 2 screws under the cooktop, tilt the cooktop back, unplug 4 wires from 8" burner, remove two screws holding retaining clips, install new burner in reverse order. Very simple!
Kevin from Leominster, MA
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Screw drivers
70 of 92 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Left rear element would not get hot.
FIRST TURN OFF THE CIRCUIT BREAKERS THAT POWER THE COOKTOP!! Remove the cooktop from the counter by removing the screws from the mounting straps under the counter. Then remove the screws that hold the glass cooktop to the frame and lift off the glass top. Next lift up the bad element and unplug one wire from the bad element and plug it in
... Read moreto the new element. Make sure to put it on the exact same terminal of the new element. Do this for all the wires. Remove the two mounting tabs from the old element and put them on the new element. Turn on circuit breakers and your done.
Read less
John from Hopewell Junction, NY
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
19 of 25 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Burner "burned out" so we replaced the one and replaced the other that seemed to be cooling down.
Basically removed the screws holding the op on and removed the vent from back. Just "figured it out" and now it works. Wish I could be more helpful. Recommend moderate experience and confidence.
Ask our experts a question about this part and we'll get back to you as soon as possible!
16 questions answered by our experts.
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Rosa
April 24, 2019
I need to replace the two small haliant burners for my old stove.Could you please indicate what is the part number. Also , the numbers around the surface knobs are erased , can the numbers be purchased .
For model number JBP64SH2SS
Hello Rosa, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS243905 for the elements. The faceplate with the numbers around the knobs has been discontinued sorry. My suggestion here would be to call the manufacturer and see if they can provide you with a substitution for these part numbers. Hope this helps!
When i enter the above model number of my stove into a parts list they all drop the o in between the w and b. Is that really the correct model number? I need the large heating element (burned out large coil) and i want to be sure i get the right part.
For model number JBP78WOB1WW
Hello Robert, thank you for writing. I was able to locate a parts list for your exact model number without the '0'. This 8" Large Haliant Burner with Limiter is the correct replacement for it.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Randy
November 25, 2019
My switch went out and my 8" burner wouldn't come on. Had a repair man replace the switch. Burner won't come on until set to med then get really hot and go off. I bought another switch and replaced the one he put in and it still won't come until med then hot and can't control the heat. Do I need a new burner? That's all I can figure. Thanks
For model number RF265LXTY3
Hello Randy, Thank you for the question. If the switch is properly installed, the limiter on the element could be defective. The Limiter is only sold as part of the element, so the element will need to be replaced. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Rob
March 15, 2018
Right front burner only outside element on with selector switch set to large
For model number JBP65DM1BB
Hi Rob,
Thank you for your question. If only part of the element is coming on, the element will need to be replaced. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Tom
January 14, 2019
I replaced a mechanically defective controller. Both the new replacement infinite controllers get stuck on after the eye warms up (after a couple of cycles on setting two). I can hear the controller click but the eye stays on. Could this be a problem with the burner? All wires and connections seem ok.
For model number JPB66WY5
Hi Tom,
Thank you for your question. Usually in this situation, the burner switches would have to be replaced. I would recheck the switches and I would also check the burners and the wiring between the parts to see what is causing the issue. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Mike
October 8, 2017
Burner will only heat if you turn knob to high. Let it get hot, then bring knob back to desired temp. Should i replace burner?
For model number JBP66BB1AD
Hi Mike,
Thank you for your question. I would suggest testing your burner first. Then you should also test your switch to. It could really be either of those parts. Good luck with your repair.
Was this helpful?
Thank you for voting!
Desmond
October 9, 2017
I need the front left burner for this hot point stove its the small eye
For model number RB790WK3WW
Hi Desmond,
Thank you for contacting us. I have linked the correct part below for you. Good luck with your repair.
8" burner comes on then goes out on settings 1 thu 9, but stays on on hi. Is it the switch or burner
For model number JBP79WYI
Hi Bob, Thank you for the question. This should like an issue with the switch that controls the burner. Hope this helps!
Was this helpful?
Thank you for voting!
Elena
December 23, 2017
Where can i find the correct model number for surface element replacement if the model number is not on the back of the range or the owner's manual. There is a series of numbers on the actual element but not sure which one is the correct one. Please help!
Hello Elena, Thank you for your inquiry. You can also find the model number in the lower storage drawer, on a plate on the frame beside the storage door, on the lip of the oven cavity with the oven door open or on the side. Hope this helps!
Was this helpful?
Thank you for voting!
Rosa
April 22, 2019
My stove is an old model not found. I need to replace the 2 small haliant burners. What parts will fit my stove?
For model number JBP64SOH2SS
Hello Rosa, thank you for inquiring. The correct replacement Six Inch Haliant Burner with Limiter is part PS243905 for your model.
Was this helpful?
Thank you for voting!
< Prev
1
2
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.
If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.
On Order
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Special Order
Item is not in stock and usually ships 10-15 business days from the time you place your order.
NLA - No Longer Available
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Range","title":"Range","url":"/Range-Parts.htm"},{"position":2,"name":"Element or Burner","title":"Element or Burner","url":"/Range-Elements-and-Burners.htm"},{"position":3,"name":"WB30T10045","title":"WB30T10045","url":""}]
You added 1 item to your cart
✖
$
Qty:
Total item(s) in cart:
Order Subtotal
$
*Taxes and shipping will be applied during checkout
