16225972-5-M-GE-WB30X38934-SURFACE DUAL RADIANT ELEMENT 9" KIT"
Part Location Diagram of WB30X38934 GE SURFACE DUAL RADIANT ELEMENT 9" KIT"
See part 58 in the diagram
( Grid squares measure 1x1 inch )
Part Location Diagram of WB30X38934 GE SURFACE DUAL RADIANT ELEMENT 9" KIT"
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

customerservice@partselect.com

SURFACE DUAL RADIANT ELEMENT 9" KIT" WB30X38934

 Fits your J66RP1BG!

Rated by 2 customers 

A Bit Difficult 

1- 2 hours 

Ratings submitted by customers like you who bought this part.

$ 262.51
  On Order
Get FREE EconoShip on orders over $100! T&C apply
 Fits your J66RP1BG!
PartSelect Number PS16225972
Manufacturer Part Number WB30X38934
Manufactured by GE
Product Description

SURFACE DUAL RADIANT ELEMENT 9" KIT" Specifications

This dual element can be changed to be used as either a small or large burner. It comes with the element limit switch.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Element will not heat
This part works with the following products:
Range, Cooktop.
This part works with the following products:
General Electric, Kenmore.
Part# WB30X38934 replaces these:
343001, WB23M0010, WB23M10, WB30T10005, WB30X10007, WB30X5142
Back to Top
Customer Repair Stories
 Average Repair Rating: 2.3 / 5.0, 2 reviews. What's this?
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
One coil of dual-coil burner didn't work
GE changed the design a little, moving a connector so the existing wires didn't reach. I texted the model number to an address provided with the part, and GE returned a URL for installation instructions. The instructions said there should be two jumpers to extend the wires, but there was only one, so I had to make a trip to the hardware store to get connectors to make my own jumper. Read the instructions carefully for where to connect the wires. My initial connection was wrong, but nothing bad happened, just the unit didn't heat. Two mounting tabs from the old unit need to be moved to the new. Heat shrink tubing is provided to cover the joints where the jumpers connect to the old wiring. If the jumper hadn't been missing, it would have been a quick, easy install.

When I ordered, nobody (19 different web sites) had the part in stock. GE took over 2 months to ship the part to PartSelect, but finally the stove is fully functional again.
Read less
  • Robert from BEDFORD, MA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Screw drivers
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Right front heating element was not working
First removed the back of range, then the metal vent section that prevented the range top from lifting up. There are 2 screws accessable only after you open the oven door that need to be removed before you can lift up the glass top. Then remove the bracket holding the 2 front heating elements. Made a diagram of all wires going to and from the large 2 element heater. I had to use an adjustable wrench to remove the 2 studs that were screwed into the sheetmetal section of the element. Carefull not to let the springs or retaining washers get lost.
I examined the inner and outter heating element windings and discovered that the old and new unit was not wired the same. Additionally the instructions were not very clear as to what color wire they said to cut and why. I could not install the studs in the exact locations as the original unit since trhe new one had a slightly different terminal block location. This resulted in the new unit being rotated about 20 degrees CCW looking from under the top. The wire going to the LED heating indicator was now too short so I used the wire supplied with the new unit to extend this.

I used a multi-meter to verify the coil terminal locations and made sure the colored wires went to the same terminals as the original assembly. (Inner coil, outter coil and common terminal) The instructions supplied did not show the same terminal locations as the unit itself for these 3 terminals. Other terminals, which were simply junction points, were the same as the original unit.



By using an ohm meter and the diagram of the colored wires made before taking off any wires one should be able to do this repair. But it was not easy. Ckeck all wires 3 times before turning on power.
Read less
  • Eugene from Hilton Head, SC
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Pliers, Screw drivers, Socket set, Wrench (Adjustable)
9 of 16 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Back to Top
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

1 question answered by our experts.
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ronald
October 13, 2023
Please provide installation instructions for surface element wb30x38934
For model number jp960ba1bb
PartSelect logo
Hi Ronald, thank you for the question. To replace the surface dual radiant element, you will need to remove the knobs from the cooktop. After removing the knobs, open the two screws on the burner box's bottom assembly that is securing the glass main top. Lift up the glass main top. After lifting the top, you can access the surface dual radiant element. We hope this is helpful!

Was this helpful?
Thank you for voting!
  • 1
Back to Top
Model Cross Reference
This part works with the following models:
PartSelect Number: PS16225972
Manufacturer Part Number: WB30X38934
Brand
Model Number
Description
Kenmore
9114262590
Cooktop
Kenmore
9114262591
Cooktop
Kenmore
9114262990
Cooktop
Kenmore
9114262991
Cooktop
Kenmore
9114264590
Cooktop
Kenmore
9114264591
Cooktop
Kenmore
9114264990
Cooktop
Kenmore
9114264991
Cooktop
Kenmore
91142656590
Cooktop
Kenmore
91142656591
Cooktop
Kenmore
9114265691
Range - Kenmore Range/Stove/Oven Model 911.4265691 (9114265691, 911 4265691) Parts
Kenmore
9114364590
Cooktop
Kenmore
9114364591
Cooktop
Kenmore
9114364990
Cooktop
Kenmore
9114364991
Cooktop
Kenmore
9114672590
Range
Kenmore
9114672591
Range
Kenmore
9114672592
Range
Kenmore
9114672990
Range
Kenmore
9114672991
Range
Kenmore
9114672992
Range
Kenmore
9114678810
Range
Kenmore
9114678811
Range
Kenmore
9114678890
Range
Kenmore
9114678891
Range
Kenmore
9114678892
Range
Kenmore
9119592590
Range
Kenmore
9119592591
Range
Kenmore
9119592592
Range
Kenmore
9119592990
Range
Back to Top
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

Contact Customer Service
SURFACE DUAL RADIANT ELEMENT 9" KIT"
$ 262.51
  On Order
✖
Stock Status
 In Stock

Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.

If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.

 On Order

Item is not in stock and usually ships 3-5 business days from the time you place your order.

 Special Order

Item is not in stock and usually ships 10-15 business days from the time you place your order.

 NLA - No Longer Available

This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.