GE/GE_Thumb/00006152i01.gif
See part 156 in the diagram
Replacing your General Electric Range Surface Element - 8 Inch - 2350W play video
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Surface Element - 8 Inch - 2350W

★★★★★
★★★★★
18 Reviews

Rated by 43 customers 

Really Easy 

Less than 15 mins 

Ratings submitted by customers like you who bought this part.

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your 2150 PR!
 Fits your 2150 PR!
PartSelect Number PS243868
Manufacturer Part Number WB30M2
Manufactured by GE
You May Also Need?
Product Description

Surface Element - 8 Inch - 2350W Specifications

The surface element, also known as the coil surface element, transfers heat to the area on top of range. The element is 8 inches in diameter. If your surface element does not heat, over heats, or heats inconsistently, replacing this part can be the solution to your issue. To determine whether the element is defective, use a multimeter to test it. Before installing the new element, make sure the drip bowl is properly aligned with the notch of the pan. Insert the new element into the reciprocal at a 40 degree angle. Refer to the instructions provided by the manufacturer for more guidance.
How Buying OEM Parts Can Save You Time and Money play video

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Element will not heat | Little to no heat when broiling
This part works with the following products:
Range, Cooktop, Microwave Oven Combo.
This part works with the following products:
General Electric, Hotpoint, Kenmore.
Part# WB30M2 replaces these:
AP2634728, 2797, WB30M2, 340524, WB30K5027, WB30M0002, WB30X5072, WB30X5120, WB30X5122, WB30X5130
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

4 questions answered by our experts.
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Joan
March 26, 2020
I’m trying to find drip bowls for my stove LG is 8 in small not sure. Just need new ones. My stove is electric
For model number ??
Hi Joan, Thank you for your question. Before we can assist you further we would need the model number from your stove. Here is a link from our website that you may reference on where to find the model number on your appliance, https://www.partselect.com/Find-Your-Range-Model-Number.aspx. If your stove has a bottom drawer where you store pots and pans, pull the drawer out and on the left or right frame, sometimes on the frame where the drawer shuts onto, you will find a tag with both the model and serial numbers on it. We hope this helps. Thank you and have a great day.

5 people found this helpful.

Was this helpful?
Thank you for voting!
Corinne
January 21, 2019
Is this replacement burner a genuine calrod?
Hello Corinne, Thank you for the question. All the parts we sell are OEM genuine parts. Thank you for your inquiry, good luck with this repair!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Kathy
November 12, 2019
Hi i need a replacement burner for an 8" with the " simmer select feature"
For model number 790.93752102
Hello Kathy, thank you for your question. The larger 8 inch element for this unit is PartSelect Number PS2339242. Please enter the part number into the site for current price and availability. Good luck with your repair!

Was this helpful?
Thank you for voting!
Ben
28 days ago
One of the 8" elements on our GE electric stove top is has developed a "hot spot" were it burns a brighter orange than the rest of the element. I figure this is a sign that it needs to be replaced, though it still works. I bought a generic replacement element from my local hardware store, but "legs" of the element where it plugs in were to long so the element would not sit in the drip pan. Is that because it was generic, not OEM?
For model number JP328WK2WW
Hi Ben, thank you for reaching out. Yes, the generic part will not work with your model, you will need to order the compatible part. The part number is PS243868. If you need help placing an order for it, please feel free to give us a call. We look forward to hearing from you!

Was this helpful?
Thank you for voting!
Part Videos

Replacing your General Electric Range Surface Element - 8 Inch - 2350W

Replacing your General Electric Range Surface Element - 8 Inch - 2350W play video
Customer Repair Stories
 Average Repair Rating: 4.8 / 5.0, 43 reviews. What's this?
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
I needed new surface elements & burner bowls
This was about the simplest fix I've ever done. Just pulled off the old surface elements & burner bowls, wiped down the range top, and put in the new parts. Perfect fit. No problems at all. $$ well spent. ParsSelect shipped quickly, and they arrived well packaged. A+ experience all around. Thanks PartSelect. JA, San Ramon, CA
Other Parts Used:
Drip Bowl - 6 Inch Surface Element - 6 Inch - 240V
  • John from San Ramon, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
491 of 500 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replacement of Coils
Removed by slightly wiggling out of the coupling. No tools needed, seriously, (and I'm a contractor). Basically, pull out and snap back in.
Other Parts Used:
Surface Element - 6 Inch - 240V
  • Joseph from South Plainfield, NJ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
35 of 42 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Heating element required continuous adjustments to work.
I removed old 8" surface element and terminal block. Some of old wiring had to be cut off because of harding/cracking of old wiring. Stove was 23 years old and this burner was the most frequently used one. I soldered the new and remaining old wires together. I used the shirnk wrap that came with the terminal block to cover the solder joint. I screwed the new terminal block (one screw holds it in place - used same screw from old terminal block that was removed). I finished by inserting the new surface element. Everything works fine. In the next week or two after we use it a while, I will check wiring again to make sure there are no changes. You need to be very careful as it gets very hot under the burner.
Other Parts Used:
Terminal Block
  • Richard from Apex, NC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
29 of 32 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Our 12 year old oven bake element sparked and died on us
So easy, first I turned off the main switch to the electric. Unscrewed old bake element and screwed in the new one. Worked like a charm. We also bought from Part Select new burners and drip pans. Can't believe how good it looks. I placed my order on a Sunday and received it on Tuesday!! 2 days. Awesome website...Have told everyone about it..THANK YOU PART SELECT..
Other Parts Used:
Door Handle End Cap Bake Element - 220V 2300W Burner Bowl - 8 Inch Burner Bowl - 6 Inch Surface Element - 6 Inch - 240V
  • Laura from Downingtown, PA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers, Wrench (Adjustable)
14 of 14 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Terminal block and 8" element shorted
Unpluged range. Removed back cover to access the infinite switches . removed old burner and drip pan. removed terminal block and retaining screw on cooktop. removed terminal block wiring from infinite switch taking care to mind were the wires came from. Install new terminal block and reattached to cooktop . installed new 8" burner and drip pan reinstalled back panel and plug in electrical to unit . tested burner . replaced stove after verifying burner worked
Other Parts Used:
Drip Bowl - 8 Inch Drip Bowl - 6 Inch Surface Burner Terminal Block Kit
  • Angelo from Duson, LA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
11 of 12 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The Drip pans were unusable due to excessive use, and I decided to replace the Surface Elements as well.
There was nothing to it...I unplugged the Sufrace Elements from thier bases, removed the Drip Bowls, replaced the Drip Bowls and then plugged the Surface Elements back in to thier bases. The entire process could not have taken more than two minutes.
Other Parts Used:
Drip Bowl - 8 Inch Drip Bowl - 6 Inch Surface Element - 6 Inch - 240V
  • Michelle from West Bend, WI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
10 of 11 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Burners were not level and did not heat evenly
The burners were not level and would heat more on one side than the other. Since the range was 21 years old and would cost a lot to replace, I decided to replace the burners and
treat myself to new drip bowls. I Googled and got the information on the range including part numbers. I ordered them and am very happy. It was very easy to replace the old ones. Only problem the large drip bowl was dented but on sending an email to compamy, a new one is being sent. I am very happy at the ease since I am a retired widow of 76 years old. It pays some time to take care of the old and do a little reapair instead of spending a lot of money on relacement when every thing else is in excellent condition.
Thanks for making this a very easy experience.
Other Parts Used:
Porcelain Drip Bowl - 6 Inch Porcelain Drip Bowl - 8 Inch Surface Element - 6 Inch - 240V
  • Ardeth from Mesa, AZ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
7 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The terminal burner block was burned out, and surface plate not heating.
My husband removed all the old terminal block and element, and put the new one in. It was very easy. Thank you for the instructions which were included.
Other Parts Used:
Surface Burner Terminal Block Kit
  • Carol A. from Orlando, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
7 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
element was loose, heated erratically
The cause of the problem was that I had installed a generic replacement recepticle earlier. Parts Select had the correct part. It came with handy wire nuts to help connect to range wires to the recepticle wires.
Other Parts Used:
Receptacle Kit
  • Radford from Herndon, VA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
4 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Surface Burners were very slow.
Removed old surface burners and replaced them by plugging in the new surface burners. Now they work GREAT! Parts ordered and received with-in 3 business days. Fed EX delivered parts in good order very quickly. We recommend PartSelect.com
Other Parts Used:
Surface Element - 6 Inch - 240V
  • Fisher from Fort Collins, CO
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
4 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer Reviews
Average Rating:
★★★★★
★★★★★
18 Reviews
4.3
Filter By Rating:
  • 5 Stars
    10
  • 4 Stars
    5
  • 3 Stars
    2
  • 2 Stars
    0
  • 1 Star
    1
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Model Cross Reference
This part works with the following models:
PartSelect Number: PS243868
Manufacturer Part Number: WB30M2
Brand
Model Number
Description
Kenmore
22101
Range - Kenmore Range/Stove/Oven Model 22101 (1988) (22101(1988)) Parts
Kenmore
22102
Range - Kenmore Range/Stove/Oven Model 22102 (1988) (22102(1988)) Parts
Kenmore
22105
Range - Kenmore Range/Stove/Oven Model 22105 (1988) (22105(1988)) Parts
Kenmore
22106
Range - Kenmore Range/Stove/Oven Model 22106 (1988) (22106(1988)) Parts
Kenmore
22107
Range - Kenmore Range/Stove/Oven Model 22107 (1988) (22107(1988)) Parts
Kenmore
22108
Range - Kenmore Range/Stove/Oven Model 22108 (1988) (22108(1988)) Parts
Kenmore
36342482200
Cooktop
Kenmore
36342482201
Cooktop
Kenmore
36342484200
Cooktop
Kenmore
36342484201
Cooktop
Kenmore
36342489200
Cooktop
Kenmore
36342489201
Cooktop
Kenmore
3634272790
Cooktop
Kenmore
36343482200
Cooktop
Kenmore
36343482201
Cooktop
Kenmore
36343484200
Cooktop
Kenmore
36343484201
Cooktop
Kenmore
36343489200
Cooktop
Kenmore
36343489201
Cooktop
Kenmore
3639308810
Range
Kenmore
3639378810
Range
Kenmore
3639378880
Range
Kenmore
3639858810
Range
Kenmore
3639858911
Range
Kenmore
3639868810
Range
Kenmore
3639878810
Microwave Oven Combo
Kenmore
3639878911
Microwave Oven Combo
Kenmore
3639878911KS
Range - Electric Range
Kenmore
3639888810
Microwave Oven Combo
General Electric
42045
Range - ACCESSORY MODULE

Get in touch, we're here to help!

Open until 1am EST

Contact Customer Service