If you notice that your surface element will not heat properly, you may need to replace it. This surface element is 6 inches in diameter and 240V. It is a Y-frame surface burner element with five turns and a metallic center medallion. When completing this repair, if you notice any signs of corrosion or overheating on the terminal, you may want to consider replacing the terminal block as well as the surface element. Many of our customers have rated this repair as easy. To complete this repair, simply tilt the old element up and remove it, and then replace it with your new one.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your General Electric Range Surface Element - 6 Inch - 240V
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Charlotte F - April 6, 2021
Verified Purchase
Perfect replacement
The part was well packaged when it arrived.
I easily installed it and everything works again.
Thank you for your quick response to my order.
★★★★★
★★★★★
Lawrence P - May 7, 2020
Verified Purchase
All went well
All went well!
★★★★★
★★★★★
Cynthia O - December 11, 2018
Verified Purchase
element
It came in a timely manner and was easy to order online. The part fits great!
★★★★★
★★★★★
Anne R - November 30, 2018
Verified Purchase
Easy Repair
Received part quickly,stove fixed in time for Thanksgiving
★★★★★
★★★★★
Gary M - September 19, 2018
Verified Purchase
stove burner
Fits perfectly and works great.
★★★★★
★★★★★
Don C - July 4, 2018
Verified Purchase
High Quality
Fit like a glove!
★★★★★
★★★★★
Roger R - February 9, 2018
Verified Purchase
6" replacement buner
Rec'd the part. It works fine. Came in record time..Thanks to all.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 4.9 / 5.0, 32 reviews.
What's this?
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
a plug on the element broke off while cleaning and replacing
Absolutely no tools required for this task. Simply align the prongs to the female portion on the stove top. Carefully push in until the element is in place then line up with the drip pan slot. No instructions are necessary!!
David from WEST WARWICK, RI
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
I had to replace my drip pans as well as the heating elements on all four burners
Very simple to replace, pull off the old element and push in the new one. Not only was it super easy, part select was so easy to work with. I had placed the order wrong, and immediately called customer service. They cancelled my order and placed the new one, refunding my money within 2 business days for the wrong order. Courteous, friendl
... Read morey and prompt. I would highly recommend them! Oh, I forgot to mention that the parts actually fit perfectly, unlike drip pans bought elsewhere. Thank you, Sincerely, Cindy
remove broken heating element and install the new one
Sherry from BLUFFTON, SC
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Plug-in surface element was covered with a melted on forever microwave plate
Just put it right into the receptacle. I want to add...we had gone to our local appliance store and brought home a wrong-size unit. Got online and your website came up. It was easy to find the correct part, ordered it and it arrived 3 days later. I have already recommended your website to 2 of my friends. One very good experience!!!
Lois from Sarver, PA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
0 of 1 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The coils did not heat up well and they did not fit in the drip bowls exactly
I removed the drip bowls and pulled out each coil from the plug on the range. Plugged in the new coils and replaced the drip bowls.
ordered new surface element and pushed in to conector turned on switch to test and works fine thanks
MARLENE from EUGENE, OR
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
0 of 1 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
burned-out six inch electric stove- top burner
Removed the old and slipped in the new.No problem and it works fine.
Harold from Gloversville, NY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
0 of 1 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Burner went out and wanted to update look.
Changed out the burner element and then updated all of the centers on the remaining elements. changed out the rings and the pans and now the stove looks new. Thanks for the fast shipping. Brett
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Frank
May 25, 2022
Seeking 6" Electric Cook Top replacement coil. Will this fit? Thank you
For model number J P326WOV2WW
Hi Frank,
Thank you for your question. Yes, this would be the correct 6-inch surface burner element for your range. If you need help placing an order for it, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Roger
October 4, 2023
Does this 6 inch burner come with the Y support and center? I only need the Y support and center. The weld on the Y broke. The burner itself works fine. Can I get the Y support and center only and , if so, what is the cost and order numbers?
For model number RB755GT3AD
Hello Roger, thank you for your question! Yes, all the plug in surface radiant include Y supports. You will need to replace the whole surface element, part number PS243867. Y support is not sold separately. We hope this information is useful!
Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.
If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.
On Order
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Special Order
Item is not in stock and usually ships 10-15 business days from the time you place your order.
NLA - No Longer Available
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Range","title":"Range","url":"/Range-Parts.htm"},{"position":2,"name":"Element or Burner","title":"Element or Burner","url":"/Range-Elements-and-Burners.htm"},{"position":3,"name":"WB30M1","title":"WB30M1","url":""}]
You added 1 item to your cart
✖
$
Qty:
Total item(s) in cart:
Order Subtotal
$
*Taxes and shipping will be applied during checkout