GE/GE_Thumb/00010095i03.gif
See part 132 in the diagram
Replacing your Kenmore Range Single Heating Element Support Clip play video
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Single Heating Element Support Clip

★★★★★
★★★★★
7 Reviews

Rated by 16 customers 

Really Easy 

15 - 30 mins 

Ratings submitted by customers like you who bought this part.

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your RK736GP1!
 Fits your RK736GP1!
PartSelect Number PS243701
Manufacturer Part Number WB2X9719
Manufactured by GE
Product Description

Single Heating Element Support Clip Specifications

The metallic clip, or also known as a broil element support, is for a oven element on a range. This part holds the broil element in place on top of the oven. If your support clip is broken then this replacement should be the solution. The tools needed for this project are slip joint pliers. For safety precautions, make sure to unplug your range from the power source, or shut off the house circuit breaker before starting this project. Refer to the installation instructions for best results and accuracy.
How Buying OEM Parts Can Save You Time and Money play video

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Element will not heat
This part works with the following products:
Range, Wall Oven, Microwave Oven Combo.
This part works with the following products:
Kenmore, General Electric, Hotpoint, Roper.
Part# WB2X9719 replaces these:
AP2014510, 251560, 285840, 324808, 334565, 339593, 4334357, 4337249, 4338587, 8004768, WB02X9438, WB02X9576, WB02X9719, WB2X9438, WB2X9576
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

1 question answered by our experts.
    Sort by:
    Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
    Richard
    September 22, 2022
    F3 code after about 20 minutes at 375 degrees bake. Replaced Heat Sensor and still has the same code? Suggestions. #91147465971
    For model number 91147465791
    Hello Richard, thank you for your question. F3 error indicates a faulty oven sensor, part number PS236043. If you have replaced it then we would recommend checking for an open wire connection between EOC (Electronic Oven Control - Clock) and the oven temperature sensor. Let us know if you have further questions!

    Was this helpful?
    Thank you for voting!
    Related Parts:
      Part Videos

      Replacing your Kenmore Range Single Heating Element Support Clip

      Replacing your Kenmore Range Single Heating Element Support Clip play video
      Customer Repair Stories
       Average Repair Rating: 4.4 / 5.0, 16 reviews. What's this?
      Sort by:
      Sorry, we couldn't find any existing installation instruction that matched.
      broiling element had burned through, req. its replacement
      First I removed the two screws that hold the element in place. I also removed a screw that held one end of a support bracket. I then pulled the element out about 3 inches and disconnected the two wires. Reversing these steps, I finished the element's replacement.

      I had noticed that the former element was sagging at the front end. I installed the additional clips (not original) on each forward end of the element for additional support.
      Other Parts Used:
      Broil Element
      • Paul from Canton, NY
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        Less than 15 mins
      • Tools:
        Pliers, Socket set
      45 of 55 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Bake element bad
      Inside oven, remove two screws that hold element to back wall, pull element out three or so inches to get to wire clip connections, unclip wires, remove bad element, put new element in in reverse order of taking out bad element, just that simple. Also this site was so easy to use, plus the shipping time was unbelieveably short, even a company service man couldn't have been that quick, or as reasonable. Thanks a bunch!!
      Other Parts Used:
      Light Bulb - 40W Bake Element
      • Stanley from Sulphur, OK
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Nutdriver, Pliers, Screw drivers
      14 of 27 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Heating element dangling
      Snapped in the clip
      • Victor from Miami Beach, FL
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        Less than 15 mins
      10 of 13 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      The upper element for broiling went kaput!
      The two dollar socket set from Xmas 20 years ago had the right size socket..

      Long arms are advisable.

      The lower element still plugged in while the upper wires were just hanging there surrounded with fluffy white insulation fuzz, I wondered, " Could I bake a potato for my yearning and hungry family?"

      When I explained the situation to my retired father in Arizona he said simply, "I wouldn't."

      The new element popped in. It got really red, and, kinda like watching my toaster toast, the show was pretty much over after it heated up.

      Shalom and Merry Christmas Folks!
      Other Parts Used:
      Broil Element - 240V
      • Gerald from Redondo Beach, CA
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        Less than 15 mins
      • Tools:
        Socket set
      8 of 10 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Dryer old and worn out
      Dryer started making noises years ago. Finally it was intermittently starting, then...didn't start at all. It made a buzzing noise, like the motor was in over-torque. Then it over heated and wouldn't do anything until it cooled down. Then the cycle started all over again. I thought it best to change out all the worn parts. Found the belt, the rear seal, the rollers and motor all needed to be replaced. All were very simple to do. Followed the instructions and videos from others located on this site.
      Other Parts Used:
      Rear Drum Support Roller Kit Multi Rib Belt - 92-1/4" Rear Drum Seal Kit
      • Harald from Port Washington, NY
      • Difficulty Level:
        Easy
      • Total Repair Time:
        30 - 60 mins
      • Tools:
        Pliers, Screw drivers, Socket set, Wrench (Adjustable)
      8 of 13 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Single Heating Element Support Clip was needed to hold up the heating element in the oven. Old single heating element support clip broke and came out of the hole.
      Simply inserted the clip into the hole in the oven. It took less than 20 seconds. :D
      • Marion from METHUEN, MA
      • Difficulty Level:
        Very Easy
      • Total Repair Time:
        Less than 15 mins
      5 of 5 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      The old single heating element support clips came loose over time.
      I ordered the replacement clips from this site and they arrived in a timely manner. The clips were perfect, but due to the age of the oven, the holes had elongated and the new clips kept falling out also. I modified the clips by widening the tips with a pair of pliers. They are holding just fine. I don't think the older clips could've withstood the modification.
      • David from SALISBURY, CT
      • Difficulty Level:
        Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Pliers
      4 of 4 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      heating element clap broke off
      All I had to do was pop the clamp on the top part of the heating element and push the clamp into the hole.
      • James from Hedgesville, WV
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        Less than 15 mins
      4 of 5 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Broiler element would not work.
      Removed the old element: removed clips holding the element, unscrewed the 2 screws that hold element in place. On the back of the range, removed casing to get to the connection wires, disconnected the element then removed the element. Reversed procedure to replace. Thanks for the speedy ordering and delivery.
      Other Parts Used:
      Broil Element - 240V
      • ANNE from FT. LAUDERDALE, FL
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Screw drivers, Socket set
      4 of 7 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Rusted burn box
      I simply removed drop in range and removed screws holding burn box and installed new box. Total time was approxmately !hr.
      Other Parts Used:
      BOTTOM BURN BOX
      • Joseph N from Hazletownship, PA
      • Difficulty Level:
        Easy
      • Total Repair Time:
        30 - 60 mins
      • Tools:
        Nutdriver
      3 of 7 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Customer Reviews
      Average Rating:
      ★★★★★
      ★★★★★
      7 Reviews
      5.0
      Filter By Rating:
      • 5 Stars
        7
      • 4 Stars
        0
      • 3 Stars
        0
      • 2 Stars
        0
      • 1 Star
        0
        Sort by:
        Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
          Model Cross Reference
          This part works with the following models:
          PartSelect Number: PS243701
          Manufacturer Part Number: WB2X9719
          Brand
          Model Number
          Description
          Kenmore
          1034688610
          Range
          Kenmore
          1036208511
          Range
          Kenmore
          1036268412
          Range
          Kenmore
          1036348412
          Range
          Kenmore
          1036408412
          Range
          Kenmore
          1036408413
          Range
          Kenmore
          1036408710
          Range
          Kenmore
          1036417610
          Range
          Kenmore
          1036417611
          Range
          Kenmore
          1036417612
          Range
          Kenmore
          1036427510
          Range
          Kenmore
          1036427540
          Range
          Kenmore
          1036427560
          Range
          Kenmore
          1036427610
          Range
          Kenmore
          1036427611
          Range
          Kenmore
          1036427612
          Range
          Kenmore
          1036428412
          Range
          Kenmore
          1036428413
          Range
          Kenmore
          1036437710
          Range
          Kenmore
          1036447710
          Range
          Kenmore
          1038357210
          Range
          Kenmore
          1038357211
          Range
          Kenmore
          1038357212
          Range
          Kenmore
          1038357220
          Range
          Kenmore
          1038357221
          Range
          Kenmore
          1038357222
          Range
          Kenmore
          1038357240
          Range
          Kenmore
          1038357241
          Range
          Kenmore
          1038357242
          Range
          Kenmore
          1038357260
          Range

          Get in touch, we're here to help!

          Open until 1am EST

          Contact Customer Service