We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
5 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Mike
November 21, 2017
What does part 291 do and where does it mount. This for a GE double oven #jtp28bf4bb .. I see it in the schematic, but can't figure out where it goes.
For model number jtp28bf4bb
Hi Mike, Thank you for the question. This cover is is for the frame trim and helps hold it in place. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Ruth
September 18, 2019
I need to re place the plastic strip on the front of the oven. The one with the labels for the push buttons. It melted and detached from the oven.
For model number JKS10BM2BB
Hi Ruth, you can buy this as part of part WB27T11338. Thank you for your question and good luck with your repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Daniel
March 23, 2024
Where does part number 291 go in my go in my wall oven
For model number PT916SR1SS
Hello Daniel, Thank you for your inquiry. When you open the oven door, it is the metal clip that goes in the front center of the oven cavity. We hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Carolyn
April 23, 2024
I need to replace the black plastic cover for the touchpad.
For model number JTP55BM2BB
Hello Carolyn, thank you for contacting us. The faceplate you are looking for is part number PS2370153. If you need help placing an order, customer service is open 7 days a week!
When using convection roast, oven heats up to setting of 375 degrees, but after approx 30 minutes temp display goes blank and oven begins to cool down. Tried to reset by turning off breaker for 20 minutes, but it does not cure problem. Any idea what could be the problem. I removed temp sensor and got reading of 1133 ohms at 70 degrees.
For model number GE Pt916SM1SS wall oven
Hello Mike, thank you for reaching out. The oven sensor, part number PS236398, should read approximately 1080 – 1090 ohms of resistance at room temperature. It is also a good idea to check the convection element, part number PS12753766, the thermal fuse, part number PS236782, and the control board, part number PS1517475, and replace the damaged part to resolve your problem. If you require assistance to place an order, please contact customer service. We hope that helps!
