Replacing your General Electric Range Surface Burner Terminal Block Kit
Troubleshooting
This part fixes the following symptoms:
Element will not heat | Will Not Start
This part works with the following products:
Range, Cooktop.
Part# WB2X8228 replaces these:
AP2013499, 250535, WB2X8228, WB02X8228, WB62X5394
Customer Reviews
Average Rating:
★★★★★
★★★★★
20 Reviews
4.8
Filter By Rating:
5 Stars
16
4 Stars
4
3 Stars
0
2 Stars
0
1 Star
0
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Thom P - May 18, 2023
Verified Purchase
Good part, Easy fix
The part was exactly what we needed, good quality and simple installation. The video was very helpful.
★★★★★
★★★★★
Kimberly L - October 18, 2022
Verified Purchase
Extremely easy to install and worked as intended.
Came in a timely fashion
★★★★★
★★★★★
Donald V - October 29, 2021
Verified Purchase
Repair part
The part came in good time. Although the video was for a part we previously ordered for the burner. But all is well and in working order
Thanks for availability for parts.
★★★★★
★★★★★
GLENN B - September 21, 2021
Verified Purchase
Worked as expected
Watched the video and installed in 15 minutes.
★★★★★
★★★★★
Gary A - August 5, 2021
Verified Purchase
Excellent
Quality part arrived ahead of schedule
★★★★★
★★★★★
Joey Z - April 3, 2021
Verified Purchase
Easy repair
The part arrived on time. It was a super easy repair. I was recovering from surgery and talked my 17 year old daughter through how to do it and it worked out perfectly.
★★★★★
★★★★★
Penny E - June 13, 2020
Verified Purchase
Simple, easy fix.
The parts I order always come quick and are easy to replace.
★★★★★
★★★★★
Russell A - April 15, 2020
Verified Purchase
Perfect fix
Part arrived fast and fit perfectly. The video was a great help.
★★★★★
★★★★★
Joan B - January 23, 2020
Verified Purchase
Perfect
Part is just what was needed. Easy ordering and fast delivery. Recommend
Part Select.
★★★★★
★★★★★
Patricia H - June 4, 2019
Verified Purchase
Easy to install
Back to cooking??Fast delivery!
< Prev
1
2
Next >
Customer Repair Stories
Average Repair Rating: 4.2 / 5.0, 33 reviews.
What's this?
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Contacts for burner plugin was burnt
Easy fix. Lift the top of the stove and change the connector. No problem because the parts were exactly what was needed.
Replaced the terminal block and used hi-temp wire connectors to place the new part into the circuit.
Karl from WINONA, MN
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
wire burned on surface terminal block
I am a 62 y/o single female and was able to make this exchange of parts with ease. The toughest was getting the old terminal's wire clips free from years of gunk! I was pleased with the ease of installation and that it really worked afterwards. By the way, thank you Parts Select for getting this part to me very quickly. If a novice c
... Read morean diagnose, find the correct part and install it with success then anyone could do the same.
Read less
KATHY from SOUTH FULTON, TN
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Wrench set
3 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
stove top burner not heating
The longest part of the job was finding my misplaced nut driver!!Note:A small socket set will do.Unplug stove from outlet,remove rear cover panel,lift stove top up to access terminal. remove the one screw that holds the terminal and slide off the two wire clips that hold the wires up out of the way.next clip off the old terminal leaving t
... Read morehe old wires so you can tape the new wires on just to pull them through the hole.Once you have the new wires pulled up to the heat control unplug old and replace with the new,tighten the screw on the new terminal and don't forget to slide on the wire clips
Read less
Jon from Readsboro, VT
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
1 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Burner terminal block unstable due to corrosion; potential electrical fire hazard
This appeared to be an easy fix, but turned out to be more involved than I planned. The hard part was pulling the range/microwave oven assembly away from the wall so I could remove the back panel and see how the new terminal block wires connected up to the switch/knob that operates the burner. Extracting the whole range unit required me
... Read more to use a floor jack to raise the leveling feet of the range above the edge of my floor tile so I could slide the unit out. Once away from the wall, I used a nut driver to remove the back panels. Next surprise was the new terminal block wire connectors were not the same type as the old block's connectors (flat vs. male pin-type). Rather than let the scope of this job creep to include a whole new connector rig, I opted to splice the new terminal block wires onto the existing wires that led up to the control knob. I used professional splices and a crimping tool to secure the wires. After checking the new installation was sound and operational, I slid the whole range back into place. Attaching the new terminal block to the range top was a piece of cake, but getting the damn oven out into open space where I could work on it was bear. But, hey, I learned a few things, one of which is that when a homeowner decides to retile their kitchen, make sure you run the new tiles all the way under the range and not just up to the front edge of the oven. I can see why this was done - to avoid having to remove the oven during the retiling - but it creates an obstacle for whenever the oven needs to be pulled away from its location. The last tool I imagined I would need for this repair was a car jack. The Parts Select part worked fine.
Read less
James from Tarpon Springs, FL
Difficulty Level:
Really Easy
Total Repair Time:
1- 2 hours
Tools:
Nutdriver
4 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Terminal block and 8" element shorted
Unpluged range. Removed back cover to access the infinite switches . removed old burner and drip pan. removed terminal block and retaining screw on cooktop. removed terminal block wiring from infinite switch taking care to mind were the wires came from. Install new terminal block and reattached to cooktop . installed new 8" burner and dri
... Read morep pan reinstalled back panel and plug in electrical to unit . tested burner . replaced stove after verifying burner worked
The wire to the burners were old and needed replacement. When the new terminals arrived, my husband had gone hunting. When the parts arrived, I pulled the stove away from the wall and found the nut driver that I needed. I removed the screw on the terminal box under the burner and realized I had to remove the back panel of the stove. I un
... Read moreplugged the old wires and plugged in the new ones. I installed the new terminal boxes under the burners and plugged the burners back in. My stove works like new and I am thrilled that it was so easy. Thanks
Read less
Kevin from Emmett, ID
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
0 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replace rangetop burner connectors
Since we got the stove,this is the second time we've repaired these connectors. The first time the connectors came with pre-stripped wires, wire nuts and heat shrink tubing. This set came with pre-attached spade terminals, so I had to crimp the mate to the wires in the stove then put heat shrink tubing on the splices. I also had to bend
... Read more the part of the connector that mounts onto the stovetop. These had a horizontal tab for the mounting screw rather than the vertical design that our ranges uses. If the connectors designed for the earlier model were available, it would simplify installation since shrink wrap and wire wraps came in that kit and the mounting bracket would fit correctly.
Read less
James from Wilson, WY
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers, Socket set
1 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Front burner would not heat
Since the unit is a drop-in range I had to remove the heat shield/drip plate to thread the wires from the control button to the receptable. The replacement part wires were to short to make the connection so I have to use some of the wiring from the old receptable to make the connection. That is the reason for using the wire cutter and c
... Read moreonnecters.
Read less
Robert from Sebring, FL
Difficulty Level:
Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers
0 of 1 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
3
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
11 questions answered by our experts.
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Chris
December 30, 2017
What is the difference between the two burner receptacle block kits listed? Part 741 and 961 on the diagram
For model number rb757wh1ww
Hello Chris, Thank you for your inquiry. 741 part# WB2X8228 is just the receptacle with wires, and 961 part# WB17T10006 is a more complete kit with the actual terminal block, additional wires and the mounting clips. Hope this helps!
15 people found this helpful.
Was this helpful?
Thank you for voting!
Barry
October 10, 2019
Part 741 and 961, if 961 is more complete kit, why it even cheaper than 741 which is only the terminal & wire. Does wire factory pre-connected to the terminal on 961 ?
For model number JBP21BC3WH
Hello Barry, thank you for writing. The Kits only contain enough parts to replace one Element Terminal Block each. They are for different Surface Elements on your range. The larger Surface Elements use part number PS242972, and the smaller Surface Elements use part number PS783534. Good luck with your repair!
6 people found this helpful.
Was this helpful?
Thank you for voting!
Sharon
February 17, 2018
My burner went to red hot on low. Do I need just the receptacle with wires and will this fix my problem?
For model number RB525V4
Hello Sharon,
Thanks for your question. This typically arises due to a faulty infinite switch, part number PS235991. We would advise testing the part with a multimeter to see if it has electrical continuity and replacing it if it shows no continuity.
I hope this helps.
2 elements only work on high they shut off on lower setting what part do i need 2 replace
For model number JBP66B Y2WH
Hello Matthew, Thank you for your inquiry. We would recommend checking the following parts to fix your issue: Infinite Switch Kit, the elements, the power terminal block kit, and the electronic clock control. Also double check the wiring for any visible damage. You can check the parts with a multimeter. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Terry
January 17, 2019
Right front coil burner will not heat when turned on, control panel light illuminates but burner will not heat. Hope you can help with solving this problem.
For model number JDS28DF1WW
Hello Terry, Thank you for your inquiry. We would recommend checking the following parts to fix your issue: 6" Surface Burner Switch - 1560W, Surface Heating Element, and the Surface Burner Terminal Block kit. You can test the parts with a multimeter. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Stanley
February 19, 2019
The oven heats and broils but none of the 4 burners work on the stovetop. What could be the problem?
For model number JBS27WC1WW
Hello Stanley, Thank you for the question. If none of the cooktop elements are working I would suggest checking the wiring. Since there is not one part that controls all the top elements, it sounds like a wiring issue. Hope this helps, good luck with this repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
JOY
March 5, 2019
My maintenance guy replaced burner receptacle today. It is not recessed back far enough for the burner to fit back into place. The new receptacle clearly does not match the other 3 burners. The old receptacles are deeper with horizontal grooves that slice down the middle of the plug in slots which are vertical. I have a part number of wb2x8228. Is this the deeper receptacle with the horizontal grooves. I need to make sure i'm giving the right part number to the maintenance guy so he can get the right on in there. The new receptacle is too shallow with no horizontal grooves in it.
For model number R B525 V1AD
Hello Joy, thank you for contacting us. The correct Terminal Block Kit is PS232636.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Robert
May 15, 2023
Is this the correct terminal for the 8" 2600Watts
For model number JBS@&B H288
Hello Robert, thank you for writing. Yes, this is for the 8" burner. Good luck with this repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Rosa
December 13, 2023
will part PS242972 (WB2X8228) fit the back connection of burner control switch PS236750 (WB24T10025) and be long enough for the front 8in surface burner element 2500w? because I ordered part PS783534 (WB17T10006) and right away without opening the bag i can see that the ends are too large to fit the burner control switch.
For model number JBS03H2WH
Hi Rosa, thank you for reaching out. Based on our research, the receptacle block kit you mentioned is compatible with your model. It will fit in the back connection of the burner control switch, and it will be long enough for 8inch surface burner element. We hope this information helps!
Was this helpful?
Thank you for voting!
Larry
January 24, 2022
I went to Loew's and got just the surface burner terminal block and it did not work. The burner heat and light is still on. Do I need the full surface burner terminal block kit or do I need the a new switch? If I need a new switch to turn the burner off and on what is that switch part number. Thank You.
For model number JBP45WW1
Hi Larry,
Thank you for your question. If the indicator light for the surface element remains on and the surface element is not working correctly, then you will need to replace the switch. The part number listed under your model number for the switch is PS16216966. If you would like to place an order for it, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!
Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.
If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.
On Order
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Special Order
Item is not in stock and usually ships 10-15 business days from the time you place your order.
NLA - No Longer Available
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Range","title":"Range","url":"/Range-Parts.htm"},{"position":2,"name":"Element or Burner","title":"Element or Burner","url":"/Range-Elements-and-Burners.htm"},{"position":3,"name":"WB2X8228","title":"WB2X8228","url":""}]
You added 1 item to your cart
✖
$
Qty:
Total item(s) in cart:
Order Subtotal
$
*Taxes and shipping will be applied during checkout
