Part Location Diagram of WB2X8228 GE Surface Burner Terminal Block Kit
See part 741 in the diagram
Replacing your General Electric Range Surface Burner Terminal Block Kit
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Surface Burner Terminal Block Kit WB2X8228

★★★★★
★★★★★
20 Reviews

Rated by 33 customers 

Really Easy 

15 - 30 mins 

Ratings submitted by customers like you who bought this part.

$ 31.61
  In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS242972
Manufacturer Part Number WB2X8228
Manufactured by GE
Product Description

Surface Burner Terminal Block Kit Specifications

Also known as receptacle.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Part Videos

Replacing your General Electric Range Surface Burner Terminal Block Kit

Replacing your General Electric Range Surface Burner Terminal Block Kit
Troubleshooting
This part fixes the following symptoms:
Element will not heat | Will Not Start
This part works with the following products:
Range, Cooktop.
This part works with the following products:
General Electric, Hotpoint, Kenmore.
Part# WB2X8228 replaces these:
AP2013499, 250535, WB2X8228, WB02X8228, WB62X5394
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
20 Reviews
4.8
Filter By Rating:
  • 5 Stars
    16
  • 4 Stars
    4
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
Sort by:
  • 1
  • 2
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
  • 2
Customer Repair Stories
 Average Repair Rating: 4.2 / 5.0, 33 reviews. What's this?
Sort by:
  • 1
  • 2
  • 3
Sorry, we couldn't find any existing installation instruction that matched.
Contacts for burner plugin was burnt
Easy fix. Lift the top of the stove and change the connector. No problem because the parts were exactly what was needed.
Other Parts Used:
Receptacle Kit Surface Burner Terminal Block Kit
  • Dennis from WISC RAPIDS, WI
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The terminal block broke
Replaced the terminal block and used hi-temp wire connectors to place the new part into the circuit.
  • Karl from WINONA, MN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
wire burned on surface terminal block
I am a 62 y/o single female and was able to make this exchange of parts with ease. The toughest was getting the old terminal's wire clips free from years of gunk! I was pleased with the ease of installation and that it really worked afterwards. By the way, thank you Parts Select for getting this part to me very quickly. If a novice can diagnose, find the correct part and install it with success then anyone could do the same.
  • KATHY from SOUTH FULTON, TN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers, Wrench set
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
stove top burner not heating
The longest part of the job was finding my misplaced nut driver!!Note:A small socket set will do.Unplug stove from outlet,remove rear cover panel,lift stove top up to access terminal. remove the one screw that holds the terminal and slide off the two wire clips that hold the wires up out of the way.next clip off the old terminal leaving the old wires so you can tape the new wires on just to pull them through the hole.Once you have the new wires pulled up to the heat control unplug old and replace with the new,tighten the screw on the new terminal and don't forget to slide on the wire clips
  • Jon from Readsboro, VT
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Burner terminal block unstable due to corrosion; potential electrical fire hazard
This appeared to be an easy fix, but turned out to be more involved than I planned. The hard part was pulling the range/microwave oven assembly away from the wall so I could remove the back panel and see how the new terminal block wires connected up to the switch/knob that operates the burner. Extracting the whole range unit required me to use a floor jack to raise the leveling feet of the range above the edge of my floor tile so I could slide the unit out. Once away from the wall, I used a nut driver to remove the back panels. Next surprise was the new terminal block wire connectors were not the same type as the old block's connectors (flat vs. male pin-type). Rather than let the scope of this job creep to include a whole new connector rig, I opted to splice the new terminal block wires onto the existing wires that led up to the control knob. I used professional splices and a crimping tool to secure the wires. After checking the new installation was sound and operational, I slid the whole range back into place. Attaching the new terminal block to the range top was a piece of cake, but getting the damn oven out into open space where I could work on it was bear. But, hey, I learned a few things, one of which is that when a homeowner decides to retile their kitchen, make sure you run the new tiles all the way under the range and not just up to the front edge of the oven. I can see why this was done - to avoid having to remove the oven during the retiling - but it creates an obstacle for whenever the oven needs to be pulled away from its location. The last tool I imagined I would need for this repair was a car jack. The Parts Select part worked fine.
  • James from Tarpon Springs, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver
4 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Terminal block and 8" element shorted
Unpluged range. Removed back cover to access the infinite switches . removed old burner and drip pan. removed terminal block and retaining screw on cooktop. removed terminal block wiring from infinite switch taking care to mind were the wires came from. Install new terminal block and reattached to cooktop . installed new 8" burner and drip pan reinstalled back panel and plug in electrical to unit . tested burner . replaced stove after verifying burner worked
Other Parts Used:
Drip Bowl - 8 Inch Drip Bowl - 6 Inch Surface Element - 8 Inch - 2350W Surface Burner Terminal Block Kit
  • Angelo from Duson, LA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
11 of 12 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
terminal blcoker replacement
had the right parts and the installation was a breeze. Have new burner bowls and stove looks brnad new.
Other Parts Used:
Burner Bowl - 8 Inch Burner Bowl - 6 Inch Surface Burner Terminal Block Kit
  • Nancy from Lynnwwod, WA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Terminal replacement
The wire to the burners were old and needed replacement. When the new terminals arrived, my husband had gone hunting. When the parts arrived, I pulled the stove away from the wall and found the nut driver that I needed. I removed the screw on the terminal box under the burner and realized I had to remove the back panel of the stove. I unplugged the old wires and plugged in the new ones. I installed the new terminal boxes under the burners and plugged the burners back in. My stove works like new and I am thrilled that it was so easy. Thanks
  • Kevin from Emmett, ID
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
0 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replace rangetop burner connectors
Since we got the stove,this is the second time we've repaired these connectors. The first time the connectors came with pre-stripped wires, wire nuts and heat shrink tubing. This set came with pre-attached spade terminals, so I had to crimp the mate to the wires in the stove then put heat shrink tubing on the splices. I also had to bend the part of the connector that mounts onto the stovetop. These had a horizontal tab for the mounting screw rather than the vertical design that our ranges uses. If the connectors designed for the earlier model were available, it would simplify installation since shrink wrap and wire wraps came in that kit and the mounting bracket would fit correctly.
  • James from Wilson, WY
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers, Socket set
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Front burner would not heat
Since the unit is a drop-in range I had to remove the heat shield/drip plate to thread the wires from the control button to the receptable. The replacement part wires were to short to make the connection so I have to use some of the wiring from the old receptable to make the connection. That is the reason for using the wire cutter and connecters.
  • Robert from Sebring, FL
  • Difficulty Level:
    Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
  • 3
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

11 questions answered by our experts.
Sort by:
  • 1
  • 2
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Chris
December 30, 2017
What is the difference between the two burner receptacle block kits listed? Part 741 and 961 on the diagram
For model number rb757wh1ww
PartSelect logo
Hello Chris, Thank you for your inquiry. 741 part# WB2X8228 is just the receptacle with wires, and 961 part# WB17T10006 is a more complete kit with the actual terminal block, additional wires and the mounting clips. Hope this helps!

15 people found this helpful.

Was this helpful?
Thank you for voting!
Barry
October 10, 2019
Part 741 and 961, if 961 is more complete kit, why it even cheaper than 741 which is only the terminal & wire. Does wire factory pre-connected to the terminal on 961 ?
For model number JBP21BC3WH
PartSelect logo
Hello Barry, thank you for writing. The Kits only contain enough parts to replace one Element Terminal Block each. They are for different Surface Elements on your range. The larger Surface Elements use part number PS242972, and the smaller Surface Elements use part number PS783534. Good luck with your repair!

6 people found this helpful.

Was this helpful?
Thank you for voting!
Sharon
February 17, 2018
My burner went to red hot on low. Do I need just the receptacle with wires and will this fix my problem?
For model number RB525V4
PartSelect logo
Hello Sharon, Thanks for your question. This typically arises due to a faulty infinite switch, part number PS235991. We would advise testing the part with a multimeter to see if it has electrical continuity and replacing it if it shows no continuity. I hope this helps.

2 people found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Matthew
April 14, 2018
2 elements only work on high they shut off on lower setting what part do i need 2 replace
For model number JBP66B Y2WH
PartSelect logo
Hello Matthew, Thank you for your inquiry. We would recommend checking the following parts to fix your issue: Infinite Switch Kit, the elements, the power terminal block kit, and the electronic clock control. Also double check the wiring for any visible damage. You can check the parts with a multimeter. Hope this helps!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Terry
January 17, 2019
Right front coil burner will not heat when turned on, control panel light illuminates but burner will not heat. Hope you can help with solving this problem.
For model number JDS28DF1WW
PartSelect logo
Hello Terry, Thank you for your inquiry. We would recommend checking the following parts to fix your issue: 6" Surface Burner Switch - 1560W, Surface Heating Element, and the Surface Burner Terminal Block kit. You can test the parts with a multimeter. Hope this helps!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Stanley
February 19, 2019
The oven heats and broils but none of the 4 burners work on the stovetop. What could be the problem?
For model number JBS27WC1WW
PartSelect logo
Hello Stanley, Thank you for the question. If none of the cooktop elements are working I would suggest checking the wiring. Since there is not one part that controls all the top elements, it sounds like a wiring issue. Hope this helps, good luck with this repair!

1 person found this helpful.

Was this helpful?
Thank you for voting!
JOY
March 5, 2019
My maintenance guy replaced burner receptacle today. It is not recessed back far enough for the burner to fit back into place. The new receptacle clearly does not match the other 3 burners. The old receptacles are deeper with horizontal grooves that slice down the middle of the plug in slots which are vertical. I have a part number of wb2x8228. Is this the deeper receptacle with the horizontal grooves. I need to make sure i'm giving the right part number to the maintenance guy so he can get the right on in there. The new receptacle is too shallow with no horizontal grooves in it.
For model number R B525 V1AD
PartSelect logo
Hello Joy, thank you for contacting us. The correct Terminal Block Kit is PS232636.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Larry
January 24, 2022
I went to Loew's and got just the surface burner terminal block and it did not work. The burner heat and light is still on. Do I need the full surface burner terminal block kit or do I need the a new switch? If I need a new switch to turn the burner off and on what is that switch part number. Thank You.
For model number JBP45WW1
PartSelect logo
Hi Larry, Thank you for your question. If the indicator light for the surface element remains on and the surface element is not working correctly, then you will need to replace the switch. The part number listed under your model number for the switch is PS16216966. If you would like to place an order for it, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!

Was this helpful?
Thank you for voting!
Related Parts:
John
January 26, 2023
My right front 8" burner when on low, gets alot hotter than it should. All ready replaced the burner switch and still doing same thing. Would it be the terminal block?
For model number J BP27WL1WW
PartSelect logo
Hi John, Thank you for your question. If your element is not heating and you have just replaced the switch, you will need to check the element and the terminal block. We have included a link that you may reference on how to check these parts. Once you have determined the part you need, please call customer service. We look forward to hearing from you!

Was this helpful?
Thank you for voting!
Related Parts:
Additional Links:
Robert
May 15, 2023
Is this the correct terminal for the 8" 2600Watts
For model number JBS@&B H288
PartSelect logo
Hello Robert, thank you for writing. Yes, this is for the 8" burner. Good luck with this repair.

Was this helpful?
Thank you for voting!
  • 1
  • 2
Model Cross Reference
This part works with the following models:
PartSelect Number: PS242972
Manufacturer Part Number: WB2X8228
Brand
Model Number
Description
General Electric
15451-0
Range
General Electric
154510
Range
General Electric
155910
Range
Kenmore
36261101000
Range
Kenmore
36261101001
Range
Kenmore
36261108000
Range
Kenmore
36261108001
Range
Kenmore
36261741000
Range
Kenmore
36261741001
Range
Kenmore
36261742000
Range
Kenmore
36261742001
Range
Kenmore
36261748000
Range
Kenmore
36261748001
Range
Kenmore
36262492000
Range
Kenmore
36262492001
Range
Kenmore
36262780100
Range
Kenmore
36262780101
Range
Kenmore
36262780102
Range
Kenmore
36262780103
Range
Kenmore
36262781000
Range
Kenmore
36262781001
Range
Kenmore
36262781002
Range
Kenmore
36262781003
Range
Kenmore
36262781004
Range
Kenmore
36262788000
Range
Kenmore
36262788001
Range
Kenmore
36262788002
Range
Kenmore
36262788003
Range
Kenmore
36291112000
Range
Kenmore
36291112001
Range
Customer Service Representative

Get in touch, we're here to help!

Open until 1am EST

Contact Customer Service