Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Amy L - October 15, 2019
Verified Purchase
Easy Repair
Great part, easy to replace. You have to take the face plate off your old board and reuse on the new one. Replacing the board and removing the face took under ten minutes from start to finish.
★★★★★
★★★★★
Steven C - November 29, 2018
Verified Purchase
Easy Repair
Easy to repair. Online instructions well done but I expected part to come in earlier than it did.
I thought it was ordered within the 3 minute deadline to receive within the next couple of days.
★★★★★
★★★★★
Richard R - February 3, 2018
Verified Purchase
Very easy repair, the correct part delivered on time!
The part arrived on time, as promised and the part was exactly what I ordered. The service was outstanding, when you get what you ordered and exactly what you ordered on time you can not ask for more than that. I would use PartSelect again and would recommend them to anyone. This company gets it, right parts on time and a very easy online process when doing so.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.8 / 5.0, 3 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Oven was not getting hot when setting temp.. took few times (turn off/on) to actually kick on.
Very simple repair.. repair guy said if it was the control board to buy a new oven. Searched for the part found it here for under 200$ shipped.
The actual repair consists of 6 screws outside, 4 holding the control board in place, and few wires in a harness. To make swapping easier, took a picture of where wires connected, they
... Read more are color coded.
Read less
Rob from MORGANTOWN, PA
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
4 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
EOC FAILED
I removed the panel on the back of the range, with a small socket head. Then I removed the old EOC. I took a photo of the wire layout to help, when I connected the new EOC, just a smart step. Connected the NEW EOC, replaced all screws and the panel.
obadiah j from SAINT CHARLES, MO
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Socket set
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Electronic Timer/Control Board malfunction
The part ordered and received was a direct replacement for the faulty electronic control board. I disconnected the electrical service, removed the back panels, disconnected the electrical connectors (after drawing a diagram with the wire colors clearly identified) before removing the holding screws. I removed the front legend cover from t
... Read morehe old part and installed in on the face of the new electronic board. I installed the electronic board, connected the wires and connectors, installed the rear panels and tested the burners and the oven elements. All of the functions worked properly with the new electronic control board and an oven thermometer confirmed the oven temperature to be correct at several settings. The lady-of-the-house is now HAPPY.
Read less
Tilden from Young Harris, GA
Difficulty Level:
Really Easy
Total Repair Time:
1- 2 hours
Tools:
Screw drivers, Wrench set
25 of 30 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
13 questions answered by our experts.
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jerry
September 8, 2017
Clock comes on and displaces correct time but only stays on about 30 seconds and then goes black what can i do to correct this
For model number GLEF384GSA
Hi Jerry,
Thank you for the question. I would recommend replacing the Electronic Control Board.This part controls the functions of your oven such as bake, broil, timed bake and the clock.
Hope this helps!
5 people found this helpful.
Was this helpful?
Thank you for voting!
Deana
January 9, 2020
The oven either won't get hot or gets too hot. Tested the oven temperature sensor and it tested fine.
For model number FEFL79DBD
Hello Deana, Thank you for the question. If the Sensor tests to good, you may have a defective Electronic Control Board, PartSelect Number PS2378933. This board controls the operation of the oven. We hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
NEIL
November 8, 2019
Control panel needs replacement
For model number PGLEF385ES2
Hello Neil, thank you for writing. The replacement Electronic Clock/Timer for your model is part number PS1149703. The Control Panel is part number PS1149701. Good luck with your repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Sam
November 23, 2019
The stove/oven control board is not working its, just black screen and i couldn't find the same control board to replace it .Can you suggest me the compatible version or model.
For model number CFEF312GBA
Hello Sam and thanks for writing.
It seems the part you are looking for has been discontinued for your model and is no longer available. We have no known replacement information in our system. We recommend you contact the manufacturer of the part to see if they have recently released a new substitute. Frigidaire Electrolux Canada 800-265-8352. We do carry other spare parts for units such as yours, for example, Part Number: PS439835. Good Luck with your repair.
Hi, my control oven board doesn't work i can't bake the elements on the top they work except the large one stays always on doesn't go on and off. Can you tell me where to purchase the parts plz thanks
For model number Frigidaire PGLEF385EC
Hello Ladi, thank you for your question. The board for that unit is part number PS1149703. The issue with the element staying on and and not going off is probably the switch itself, part number PS899921. Please enter the part number into the site for current price and availability. Good luck with your repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Ben
October 22, 2017
Control panel ps2378933 functions ok.The black plastic housing in sits in has cracked in 5 places around the perimeter.There is not enough resistance on the right half of the panel such that the function pads can work.That side of the panel just pushes in.I have hand held the back of the control panel housing and the pads/controls all work. Can I get just the housing?
For model number FEFLM605DCG
Hi Ben, Thank you for the question.Unfortunately the housing is not sold sepratly from the electronic control board. Good luck with the repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Ladi
November 21, 2018
Hi if it's only water damage to my control board what i should do because yesterday i light up the little light underneath and the clock and pf went on so i believe it's water damage thanks
Hello Ladi, thank you for your question. If the board has water damage it will have to be replaced. I hope this helps.
Was this helpful?
Thank you for voting!
Ryan
February 7, 2019
Hi,
My wife did a 2 hour self clean cycle on the oven (for the first time) and after the oven doesn’t heat. What part would i need? Seems like a lot of ovens have a red thermal switch, but this model doesn’t...or i can’t find it.
thanks!
For model number GLEFZ384GCA
Hello Ryan, Thank you for your question! I suggest checking the following parts: PS11731755 Oven Probe, PS471605 Main Terminal Block Kit, and PS977844 Bake Element - 3500W. You can test the parts with a multimeter. If you are unfamiliar with how a multimeter functions, we have videos available to assist you.
Was this helpful?
Thank you for voting!
Robert
September 26, 2019
The control board I have comes with a black wire (under the transformer) that connects to the board labeled p11 (chassis) i assume this is ground, where is best to connect this?
For model number PLEF398CCD
Hi Robert, the black wire is usually the ground wire, the black wire goes into P3 on the control board.
Thank you for your question and good luck with your repair!
Was this helpful?
Thank you for voting!
Mike
December 3, 2019
Need part number for electronic control board and overlay
For model number cfes388wg7
Hello Mike, thank you for writing. Sadly, the replacement for your model is discontinued. You will need to reach out to Frigidaire directly for a substitution part number. Please feel free to get back in touch with us if they provide one. Thank you!
Was this helpful?
Thank you for voting!
< Prev
1
2
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
