Ask our experts a question about this part and we'll get back to you as soon as possible!
1 question answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Michael
July 23, 2017
My GE microwave is intermittently blowing the internal 20 a fuse. The failure mode is after the microwave has completed its cycle, the power remains on; however, when i open the door, the fuse blows. I initially checked all the micro switches and they seem to work fine—again the problem is intermittent. Rather than replace all the switches, what switches should i consider replacing individually? Any advice is appreciated!
For model number JE2160SF03
Hi Michael, thanks for the question. In the case of your microwave, the primary interlock switch is the most likely culprit. It could also be the monitor switch but it is far more likely the primary interlock switch. I hope this helps, and good luck with the repair!
3 people found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
