NOTE: This overlay is for retrofitted models only.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Touchpad does not respond
This part works with the following products:
Wall Oven.
This part works with the following products:
General Electric.
Part# WB27T11229 replaces these:
AP4484324
Customer Reviews
Average Rating:
★★★★★
★★★★★
28 Reviews
4.6
Filter By Rating:
5 Stars
23
4 Stars
2
3 Stars
1
2 Stars
0
1 Star
2
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Jamal T - March 14, 2024
Verified Purchase
Came fast ??
Part came fast and make my oven look New
★★★★★
★★★★★
Robert W - November 30, 2023
Verified Purchase
Easy Repair
Part is great. However I would like to have found the full black stick on part. There are bubbles on the bigger part and coming unglued.
★★★★★
★★★★★
Christopher T - September 24, 2022
Verified Purchase
Bandaid
Here is the thing. You keep bugging me to make a review. I will do the review. It works for the time being. But it doesn’t match with my oven. So it really doesn’t work. Don’t know what to tell you. I have nothing bad to say about your company. You gave me a bandaid. Thank you
★★★★★
★★★★★
Anita H - April 22, 2022
Verified Purchase
Simple Repair
It was easy to use. Simple to replace: It saved me sooo much money. Prompt delivery. Thanks so much!
★★★★★
★★★★★
Gail C - February 21, 2022
Verified Purchase
Part worked great!
The part was smaller than my old one but it still fit and looked great. Was very easy to put on also.
★★★★★
★★★★★
Virginia G - January 15, 2022
Verified Purchase
Exactly what I needed
Exactly what I needed
★★★★★
★★★★★
Ronald E - January 11, 2022
Verified Purchase
Works great
Good fit
★★★★★
★★★★★
JESS Z - October 25, 2021
Verified Purchase
East fix
Part was a bit smaller than original but made it work
★★★★★
★★★★★
Glen B - September 4, 2021
Verified Purchase
Just what was needed, right part.
This was just the right part, old stove needed new control face and this was perfect. Fit so fine!
★★★★★
★★★★★
Barbara C - April 8, 2021
Verified Purchase
Great Part
Replacing the oven control overlay made our double oven look like new!
< Prev
1
2
3
Next >
Customer Repair Stories
Average Repair Rating: 5.0 / 5.0, 1 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Panel was broken
Clean surface. Then peel back from replacement panel. Lay over old panel and press to apply adhesive
James from GUNTERSVILLE, AL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
4 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
17 questions answered by our experts.
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Danny
January 14, 2018
Do you just peel off the old overlay and stick this one on?
For model number JKP30SM2SS
Hi Danny, Thank you for the question. Yes, this overlay is just a Peel And Stick. Hope this helps!
15 people found this helpful.
Was this helpful?
Thank you for voting!
Katie
November 20, 2017
Does this part cover the whole display panel? Or just the buttons? Mine is one piece and want to make sure i'm getting the right replacement.
For model number JTP30SM1SS
Hi Katie,
Thank you for your inquiry. This part would only cover the buttons on the electronic control board. However, this part is not listed under your model number. The touchpad for your appliance is sold with the control panel and the electronic control board, part number WB49T10037, has been discontinued by GE and you will need to contact them for information a replacement part. Their telephone number is 1-800-626-2005. If they provide you with a part number for the part, you may call us back with it and we can verify if we have it available for you. I hope this helps. Thank you and have a great day!
10 people found this helpful.
Was this helpful?
Thank you for voting!
Stacy
March 1, 2018
I am looking for the overlay for the above model. The one you have on your website looks too small. Are there different sizes for this model? Thanks!
For model number JTP30SM1SS
Hi Stacy, Thank you for the question. Checking the model number provided it shows the overlay was only sold as part of the control panel. I looked up the part and it is listed as No Longer Available/Discontinued. There is no part substitutions listed. My suggestion here would be to call the manufacturer and see if they can provide you with a substitution for these part numbers. Hope this helps!
6 people found this helpful.
Was this helpful?
Thank you for voting!
Michael
March 13, 2019
Our control panel cover is peeling off and is cracked. It is 17 7/8'' wide and 4 3/8" high, and the top curves down very slightly at each end.Do you have a replacement?
thank you.
i just received from you and installed a spring on our Samsung refrigerator and really appreciated the information on your website. thanks for your help! mike
For model number GE JKP30B0M1BB Built in oven
Hello Michael, thank you for contacting us. Overlay part PS2370149 is for your model.
5 people found this helpful.
Was this helpful?
Thank you for voting!
Denise
February 19, 2019
Does this cover come with the plastic that goes over the buttons under the control cover? If not how can i get those?
For model number Jtp30sm2ss
Hello Denise, Thank you for contacting us. This is the plastic overlay that goes over the buttons on the control board. Thank you.
4 people found this helpful.
Was this helpful?
Thank you for voting!
Ron
October 9, 2019
Hi! Just wanted to make sure this part would replace the surface touch pad controls on my model. My buttons work fine it’s just the plastic surface piece that i push to turn oven on, start, stop etc has worn out on certain buttons. And if so do i just peel and stick this on or what? Thank you!
For model number Jtp30sm2ss
Hello Ron, thank you for inquiring. Yes, this Overlay is the correct replacement for your model, and yes, it is a sticker that you can peel. Good luck with your repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Kenneth
February 20, 2019
Can i use this plastic overlay over the control panel of a non-retrofitted jtp30sm2ss? I don't care if it doesn't look good as long as it makes the controls more readable than they are now. Thanks.
For model number JTP30SM2SS
Hello Kenneth, thank you for your question. Unfortunately, no. The two overlays are different sizes and one won't fit on the other. I hope this helps!
Was this helpful?
Thank you for voting!
Lisa
July 13, 2021
Hi there! I am looking for a new displace faceplate overlay for my double oven as my current one is bubbling and peeling off. Do you have the part I need to replace it? Thanks!
For model number JKP35SM1SS
Hello Lisa, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS1517490. We looked up the part and it is listed as No Longer Available/Discontinued sorry. There are no part substitutions listed. Our suggestion here would be to call the manufacturer and see if they can provide you with a substitution for these part numbers and contact us back with he updated substitution number. We hope this helps!
Hello Richard, Thank you for the question. If the Knob sites on the Control Panel and not on the Overlay, your model is retrofitted. If your knob sits on the Overlay its self, it is not retrofitted. We hope this helps!
Was this helpful?
Thank you for voting!
Wendy
November 28, 2022
Hi! I need the larger black overlay that goes under the small overlay. Is that even a part/available?
For model number JTP35BM2BB
Hi Wendy, thank you for getting in touch. The part that fits behind the overlay is the oven control board, part number PS2370097. If you need help placing an order for it, please feel free to give us a call. We look forward to hearing from you!
