Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Richard S - April 28, 2023
Verified Purchase
Easy Repair
34 minutes from start to finish. And the wife was thrilled. Nuff said!
★★★★★
★★★★★
James D - April 4, 2021
Verified Purchase
Microwave turntable motor
Part was the exact fit and was the correct fix for my microwave.
★★★★★
★★★★★
John G - August 19, 2020
Verified Purchase
good choice
fit perfect and works as expected from Part Select
★★★★★
★★★★★
William F - July 17, 2020
Verified Purchase
Microwave turntable motor works great
I received the part in good condition when I expected to receive it. Installation was easy. There is a good video online that you can find by googling for it. I believe that the video was produced by GE. Search for "replace ge microwave turntable motor" or use the link below.
Here is the link: https://www.google.com/search?q=replace+ge+microwave+turntable+motor&rlz=1C1CHBF_enUS820US821&oq=replace+ge+microwave+turn&aqs=chrome.0.0j69i57j0l5j69i65.13377j1j7&sourceid=chrome&ie=UTF-8#kpvalbx=_CgcSX46XFMW2ggeT5YKgDw30
★★★★★
★★★★★
Kenneth M - April 30, 2020
Verified Purchase
Motor replacement
Simple just as described and my wife is happy
★★★★★
★★★★★
John W - November 23, 2018
Verified Purchase
Easy Repair
The part arrived safely and was easy to install. The difficult part was getting all the screws out of the bottom of the microwave and getting them back in. There were seven screws.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.8 / 5.0, 2 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
motor on turntable quite working after 5 years
just followed what I saw on my computer from Amazon and the Manual easy to change the filter too
Removed 6 screws from the front and back of the bottom of the unit. 3 screws each side. The panel will swing down. Remove the wires from the motor. Remove the one screw from the old motor. Insert the new motor and reverse the procedure. DIY will save you a $ 95.00 GE repairman labor bill, plus the cost of the motor. I repai
... Read morered the problem for less than $25.00!
Read less
Mark from LADYS ISLAND, SC
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
7 of 7 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Howard
February 5, 2018
How do I replace the turntable motor in the microwave?
For model number PVM9195SF1SS
Hi Howard, Thank you for the question. When working with microwaves you much be careful as they can hold a charge when they are not plugged in. You will need to remove the glass tray and the plastic coupling from the inside of the microwave. Next you will need to remove the screws from the under side of the unit. The panel will swing downward to expose the turn table motor. Disconnect the wire from the motor by pulling them off. The motor will be held in place by a screw and tabs, remove the screw and turn the motor until it releases from the tabs holding it in place. Reverse the steps to reinstall the new motor. Hope this helps!
9 people found this helpful.
Was this helpful?
Thank you for voting!
Mike
February 13, 2019
Is anyone available to talk?
For model number PVM9195SF3SS
Hello Mike, Thank you for the question. We are available by phone 1-888-260-4310, chat or e-mail to answer any questions or concerns you might have. Please do not hesitate to contact us.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
