GE/GE_Thumb/00115410i01.gif
See part 3 in the diagram
Replacing your General Electric Range Range Surface Element Control Switch - 6 Inch - 1560 W play video
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Range Surface Element Control Switch - 6 Inch - 1560 W

★★★★★
★★★★★
17 Reviews
$42.32   In Stock

Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS236754
Manufacturer Part Number WB24T10029
Manufactured by GE
Product Description

Range Surface Element Control Switch - 6 Inch - 1560 W Specifications

This switch controls the small burner on a range/stove top.
How Buying OEM Parts Can Save You Time and Money play video

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Element will not heat | Will Not Start
This part works with the following products:
Range, Cooktop.
This part works with the following products:
General Electric, Hotpoint, Kenmore.
Part# WB24T10029 replaces these:
AP2024076, 769696
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

7 questions answered by our experts.
    Sort by:
    Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
    Jacki
    January 25, 2018
    The 10" burners on my GE stove no longer "simmer." they're fine at full or half heat but below that, they remain too hot, making it impossible to simmer anything. I'm thinking i need to replace the burner control switch. Or do i need to replace the burner unit itself? Thanks to your wonderful video, i feel i can make the switch repair without calling a service person, if that's what i need.
    For model number JBP35DM1BB
    Hello Jacki, Thank you for your inquiry. We would recommend testing both the element and switch with a multimeter to see if they have continuity. If you are unfamiliar with how a multimeter functions, there are YouTube videos available to assist you. If both show continuity, I would check the wiring. Hope this helps!

    4 people found this helpful.

    Was this helpful?
    Thank you for voting!
    Lazarus
    February 23, 2018
    My triple burner does not work and the hot surface light is constantly on. I believe the whole part number is GE wb30t10155 element haliant 12 triple, however it seems that only a limiter may need be replaced. Do you have it sold separately and if so what is a part number? Thank you.
    For model number JB750EF2ES
    Hi Lazarus, Thank you for the question. The Limiter is only sold as part of the element its self. Hope this helps!

    3 people found this helpful.

    Was this helpful?
    Thank you for voting!
    Jake
    January 3, 2019
    So i have a glass cooktop that the right rear element stays on after turning the switch off, i would assume just replacing that switch would solve the problem but the strange thing is if i unplug the stove it resets the switch to off until used again
    For model number JB700EJ1ES
    Hello Jake, thank you for your question. Removing the power to the unit is allowing the switch to reset to off. Replacing the switch will fix the issue and allow the burner to be turned off when you're done using it without having to unplug the stove. I hope this helps!

    3 people found this helpful.

    Was this helpful?
    Thank you for voting!
    David
    October 3, 2019
    When using the front left burner, i hear an arcing/crackling sound in the area of the burner's control dial. I suspect a bad connection in the control dial. Any thoughts?
    For model number RB790DT2BB
    Hello David, Thank you for the question. I suggest checking the wiring and if it is secure and not damaged, you may need to replace the switch. Hope this helps!

    2 people found this helpful.

    Was this helpful?
    Thank you for voting!
    RONALD
    February 4, 2020
    The burner light stays on at all times, no burner on or oven on.
    For model number JBP24DM1WW
    Hello and thank you for writing. A broken hot surface switch on one of the surface elements (also called burners) causes the Hot Surface light to stay on constantly. To find out which surface switch to replace, test each of the hot surface switches. We hope this helps. Please contact us anytime if you require further assistance.

    2 people found this helpful.

    Was this helpful?
    Thank you for voting!
    Jacki
    January 25, 2018
    Oops, i just sent an email referring to 1o" burner on my GE stove. I meant 8", obviously. Your site says the burner switch fixes the problem if the eye will not heat or start. Mine heat, but i can never reduce the heat to simmer. Perhaps it's the burner unit itself?
    For model number JBP35DM1BB
    Hello Jacki, Thank you for your inquiry. You can test both the switch and burner element with a multimeter. If you are unfamiliar with how a multimeter functions, there are YouTube videos available to assist you. Hope this helps!

    1 person found this helpful.

    Was this helpful?
    Thank you for voting!
    Daryl
    March 16, 2018
    Could you please help me? My range will not heat up the burners or oven. The ciock, timer, and corresponding lights all work fine when knobs are turned. So far, i replaced the bake element and the control board, but still no heat. Any suggestions? Thank you
    For model number JBP64BB4WH
    Hi Daryl, Thank you for your question. If the oven is not heating correctly, then the issue is likely with the oven sensor, sometimes called the oven thermostat, and you will need to check it with a multimeter. When testing the sensor with a multimeter, the sensor should be tested at room temperature. You will need to measure the resistance between the two prongs at the end of the sensor connector. Replace the oven sensor if the reading is less than 900 Ohms or more than 1200 Ohms. If the sensor checks out okay, there are some other parts that you will need to check to see which ones are causing the issue. You will also need to check the bake and broil elements, surface burners, the burner switches, the electronic control board and the light switch. I hope this helps. Thank you and have a great day!

    Was this helpful?
    Thank you for voting!
      Part Videos

      Replacing your General Electric Range Range Surface Element Control Switch - 6 Inch - 1560 W

      Replacing your General Electric Range Range Surface Element Control Switch - 6 Inch - 1560 W play video
      Customer Repair Stories
       Average Repair Rating: 3.9 / 5.0, 16 reviews. What's this?
      Sort by:
      Sorry, we couldn't find any existing installation instruction that matched.
      The switches failed on both front burners.
      Remove nobs from both switches.
      Pull out the range (the hardest part).
      REMOVE THE POWER PLUG FROM THE WALL
      Remove 7 screws with nut driver and take off upper back panel.
      Remove 2 phillips screws from front, they hold the switch brackets.
      The new switches don't fit in the bracket so discard the bracket keeping the screws.
      Removing 1 wire at a time from the old switch transfer to the new noting the letter/number ie "H1 P1" combos they are all there just not in the same places on the new switch.
      When wiring is complete, using the bracket ,screws from the front screw on the switches.
      Replace the back panel with 7 screws.
      In my case the old nobs did not fit the shafts of the new switches. I found some at the local hardware store. I bought 4 for $0.29 each! I expect to be replacing the other burner switches shortly.
      Other Parts Used:
      Surface Burner Switch - 8 Inch - 2500W
      • Marc from Columbia, NJ
      • Difficulty Level:
        Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Nutdriver, Screw drivers
      85 of 91 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      back burner not getting hot
      unplug stove first...take back of stove off to get to burner switch remove wires colors coded.. get new switch put wires on the same way.plug stove in test burner...very simple to replace.and save $$$$$$$$
      • William from Shenandoah, PA
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Screw drivers, Socket set
      7 of 8 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Replace stove top burners (3 total)
      Unplug stove first. Raised the stove top and propped up useing wooden spoon and wife assistance holding up. Pay attention to spot brackets hand to top. Removed sheet metal screws from bracket clamp holding burner in place. Removed one extension bracket from old burner and transfeered to new burner. Removeing one bracket clamp allows the other one to act like a hinge and make for easy removal and replacement. Back of burner had corresponding numbers which made it easy to replace brackets in same place as old. I carefully take one electrical wire at a time from old burner and transfeered to the new burner. Replaced burner same way it came off.
      • Thomas from Bonifay, FL
      • Difficulty Level:
        Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Screw drivers, Wrench (Adjustable)
      7 of 9 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      switch went to high setting no matter what the setting was
      took off cover, pulled all wires off switch, pushed wires on new switch, put cover back on. Whalaa..
      • Frank from Glen Cove, NY
      • Difficulty Level:
        Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Nutdriver, Screw drivers
      7 of 16 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      surface burner switch was burned
      After receiving the new swith from part select in less than four days with surface mail as they promised, it took me less than five minutes to replace the new swith with the old one. The only tools that I needed were A) a 5/16 nut driver to remove the back panel in order to get an access to the swith.B) a phillips screw driver to remove the swith assembley from the front panel.

      I had an estimate from a technician to do the job for 196.27 dollars!!!!!:(:(. I only paid 29.56 Dollars to part select to get this swith, including the shipping.:):):)
      • abbas from redmond, WA
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        More than 2 hours
      • Tools:
        Nutdriver, Screw drivers
      5 of 6 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Red Light On
      Red Light Off
      • Lawrence from DECATUR, AL
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        30 - 60 mins
      4 of 4 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Defective switch
      Replaced element control switches
      • Mary from EDENTON, NC
      • Difficulty Level:
        Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Screw drivers, Socket set
      2 of 2 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      burner not work
      Fue muy facil desconectar primero la estufa despues quite los tornillos de la parte superior detras de la estufa, desconecte un cable del switch y lo conecte en el nuevo despues el siguiente hasta conectar todos los cables en el nuevo switch. Lo mejor es desconectar uno por uno para mo mesclar los cables , despues removi el switch de la estufa y puse el nuevo , puse las partes de regreso y listo conecte la estufa t revise si funcionava el quemador y listo sin ningun problema.
      • SILVIA from Midlothian, TX
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Screw drivers
      2 of 3 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Burner spontaneously cycled without knob activation
      First I cut the circuit at the breaker, and then pulled the range from wall to access the access panel. This top panel was held with 4 screws and removable with a standard phillips head screwdriver.

      I then removed the 5 wire-crimped fasteners from the defective surface burner switch. (I first labeled these wires to ensure correct placement to the new switch). There were an additional two screws behind the corresponding knob that needed to be removed in order to completely remove the old switch.

      The new switch was installed in reverse order to the steps indicated above (two screws behind knob, 5 wire-crimped fasteners, 4 screws to panel). Range was pushed back into position and breaker turned on.
      • Anil from Milpitas, CA
      • Difficulty Level:
        Easy
      • Total Repair Time:
        Less than 15 mins
      • Tools:
        Screw drivers
      2 of 3 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      front lift burner not working and surface light on with everything off
      unplugged the range removed 4 screws from back top cover then took the knob off controller removed 2 screws from behind the knob removed 1 wirer at a time and placed it on the new controller in same order the wires came off put everything back to gather did not fix the problem .
      • kevin from GAYLORD, MI
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Nutdriver, Screw drivers
      1 person found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Customer Reviews
      Average Rating:
      ★★★★★
      ★★★★★
      17 Reviews
      4.8
      Filter By Rating:
      • 5 Stars
        14
      • 4 Stars
        2
      • 3 Stars
        1
      • 2 Stars
        0
      • 1 Star
        0
      Sort by:
      Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
      Related Parts
      Model Cross Reference
      This part works with the following models:
      PartSelect Number: PS236754
      Manufacturer Part Number: WB24T10029
      Brand
      Model Number
      Description
      General Electric
      137481
      Range
      General Electric
      15451-0
      Range
      General Electric
      154510
      Range
      General Electric
      155910
      Range
      General Electric
      157710
      Range
      General Electric
      15781-0
      Range
      General Electric
      157810
      Range
      General Electric
      15785-0
      Range
      General Electric
      157850
      Range
      General Electric
      15786-0
      Range
      General Electric
      157860
      Range
      General Electric
      15891
      Range - Electric Range
      General Electric
      15891 1
      Range
      General Electric
      158911
      Range
      Kenmore
      91192502990
      Range
      Kenmore
      91192502991
      Range
      Kenmore
      91192502992
      Range
      Kenmore
      9119250799
      Range - Kenmore Range/Stove/Oven Model 911.9250799 (9119250799, 911 9250799) Parts
      Kenmore
      91192507990
      Range
      Kenmore
      91192507991
      Range
      Kenmore
      91192507992
      Range
      Kenmore
      91192712020
      Range
      Kenmore
      91192714020
      Range
      Kenmore
      91192812300
      Range
      Kenmore
      91192812301
      Range
      Kenmore
      91192814300
      Range
      Kenmore
      91192814301
      Range
      Kenmore
      91193490010
      Range
      Kenmore
      91193490300
      Range
      Kenmore
      91193491990
      Range

      Get in touch, we're here to help!

      Open until 1am EST

      Contact Customer Service