Surface Burner Switch - 8 Inch - 2100W

Hello David, thank you for contacting us. Yes, this would be the cause of a faulty switch. Good luck with the repair!

Hi Paul, Thank you for your question. If the red indicator light is still on, then the issue is with one of the burner switches and you will need to test each one with a multimeter to see which one is causing the issue. I hope this helps. Thank you and have a great day!

Hello Jesse, Thank you for the question. The wb3148952 switch originated as a Whirlpool part and is not interchangeable to the GE appliance. Hope this helps!

Hi Mike, thank you for your question. There are a couple of parts that could cause this issue specifically. You will need a multi meter to be able to test the parts. The first part you will want to check is your radiant element. It should be reading between 0 - 120 ohms to be working correctly. The other part to check would be your infinite (or surface burner) switch. When you remove that part from the appliance, connect each probe from your multi meter to the prongs and then turn the switch to an on position. If you get no continuity then the switch is the issue. I hope that helps. Good luck with your repair.

Hello Elana, thank you for your question. The infinite switch that controls that burner should be replaced. I hope this helps!

Hello James, Thank you for your inquiry. You can test the switch with a multimeter to see if it has continuity. We hope this helps.

Hi Randy, thank you for reaching out. The part you are looking for is part number PS11737261. We hope this helps! If you need help placing an order, customer service is open 7 days a week. Thanks again for your great question.

Hello Wayne, thank you for reaching out. The range written on the stickers is just an approximation. According to our research, the switches compatible with your model number are the 6" surface element control switch, part number PS236754, and the 8" surface burner switch, part number PS236752. We hope this information helps!

Hello Clyde, Thank you for the question. I suggest checking the wiring for damage and make sure everything is plugged in securely. The switch does not control the light so it should not effect it but there might be an issue with the wiring. Hope this helps, good luck with this repair!

Hello Annette, thank you for your question. The issue is probably the indicator light itself. If the switch is turning off the burner, and there is no longer heat coming from the top, the light (part number PS237433) has probably failed and will need to be replaced. Good luck with your repair!