
Surface Burner Infinite Switch - 1250W
$
129.75
In Stock



Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.
PartSelect Number PS236747
Manufacturer Part Number WB24T10022
Manufactured by
GE
You May Also Need?
Troubleshooting
This part works with the following products:
Range, Cooktop.
This part works with the following products:
General Electric, Kenmore, Hotpoint.
Part# WB24T10022 replaces these:
AP2024071, 769689
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Kevin
December 6, 2018
The burner light stays on even when the burners are off.
For model number RB526DH2BB

Hi Kevin, thank you for your question. It sounds like you may need to replace the light itself. I hope that helps. Good luck with your repair.
Was this helpful?
Thank you for voting!
Related Parts:
Dave
December 19, 2018
Right front burner ,goes way above set point,and will not adjust down until knob is turned to off then back on again, do i need a new switch?
For model number 911.93141000

Hi Dave,
Thank you for your question. If the temperature of the burner is going higher than it should, than you will need to replace the burner switch. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
Jonni
July 25, 2017
All 4 of my stove top burners all the sudden stop heating, and all at the same time, could there be a fuse on this model or a switch that controls all 4 burners that went bad on me. Thanks for the help.
For model number RB525C2WH

Hello Jonni, thank you for contacting us. All the burners and switch meet at the terminal block, it would be the only part that would cause all 4 burners to go at once. The part number for the terminal block kit is part number: PS242972 Hope this helps!
Was this helpful?
Thank you for voting!
Carlton
February 8, 2018
Right front burner will not heat replaced the block and burner
For model number RB526K1BB

Hi Carlton, Thank you for the question. If the new element did not fix the issue. I suggest replacing the switch that controls the burner. Hope this helps!
Was this helpful?
Thank you for voting!
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Customer Repair Stories
Average Repair Rating: 3.9 / 5.0, 1 reviews.
What's this?
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Switch and burner dead
Removed rear panel, disconnected wires, unscrewed switch X2 - installed new parts in reverse order. Note: Would have appreciated new mounting screws with replacement switch.
Other Parts Used:
-
william from las cruces, NM
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Screw drivers
42 of 64 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Model Cross Reference
This part works with the following models:
PartSelect Number: PS236747
Manufacturer Part Number: WB24T10022
Manufacturer Part Number: WB24T10022
Brand
Model Number
Description
