If your element will not heat, there could be an issue with your drip bowl. This chrome drip bowl is 8 inches in diameter, and fits most electric ranges. Before you replace the drip bowl, make sure the element is turned off and cool to the touch. Installation is easy, just remove the element, replace the current drip bowl, and replace the element. Make sure the small hole on the bowl lines up with the element socket. The manufacturer has substituted this part, it now has a hole in the center, and no longer has a solid bottom. For a step by step guide, click the video below.
Uneven heating of surface burners. Occasional electrical sound (arching) when burner was turned on. Also the burner would heat up and cool down while burner when turned on.
Replaced all heating surface burners. We noticed signs of arching on the front left (large) burner so we replaced that receptacle with a replacement receptacle kit. Very quick and easy install (5-10 mins) using the short part select video on receptacle kit information page.
I followed the directions that came with the receptacle kit very carefully. The most important thing to remember is UNPLUG YOUR RANGE FIRST!!!!!!!! I am an 84 year old great-grandma, and not a electrician , but I found the job very easy and enjoyable!
a really simple fix! the parts came really quickly and all i had to do was pull the heating elements out along with the old drip pans and line up the new pans and push back in. the drip pans weren't 100% perfect as they were a universal fit, and were missing the clips that help the heating elements i nplace, but they look fine and do the job all the same.
I had been putting off this repair for months! I finally sat down to explore ordering the parts. It was so easy - I wish I did it a long time ago. When the parts arrived, they were exactly what I needed.
The bake element provided was perfect. To install it required removal of the stove. Due to the blower underneath,the stove was difficult to slide out and back in. The drip bowls need replacing periodically, and these last longer than hardware store ones.
Ask our experts a question about this part and we'll get back to you as soon as possible!
8 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Bruce
March 27, 2018
Serial fx0402729 i have purchased 2 different sets of drip bowls for this oven. On the package it said it fit this stove. My problem is the drip bowl that goes over the vent hole will not fit over the vent hole. Can you tell me the inside diameter of the small 6 inch drip bowl. Want to make sure it will work before i order the parts. Thanks, bruce
For model number RF330PXVN
Hello Bruce, thank you for your question. The inner diameter of this unit is approximately 2 inches. For your specific model number, the small drip bowl is part number Drip Bowl - 6" - W10196406RW and the large is Drip Bowl - 8" - W10196405RW. These are genuine OEM parts directly from the manufacturer and specifically made for your appliance. I hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Karen
August 11, 2022
I have an older Whirlpool stove and wonder if the drip bowls, 6 inch and 8 inch will fit. Thank you for your help.
For model number RC8800XP
Hello Karen, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is Part #: PS2366563 for the 8" Drip Bowl and Part #: PS2366565 for the 6" Drip Bowl. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Hi Ahmed,
Thank you for your question. To measure the drip bowl from your stove, take a tape measure and measure the diameter of it. The drip bowl we have listed on our website is on a one inch grid square, so you may count the blocks to determine diameter of it. This drip bowl measures approximately 8 inches in diameter. We hope this helps! Good luck with the repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Cheryl Mccoy
October 14, 2017
At the bottom of stove where it meets the oven drawer, the paint is chipping. Please help; thanks
For model number RF365PXMQ
Hello Cheryl, thank you for contacting us. We have touch up paint you can use to fix those scratches, the white touch up paint is PS385132, there is also almond PS11743941 and buscuit PS373131 . Hope this helps!
Three of my stove elements do not work. This site says it may be the drip covers. How can a drip cover prevent an element from working?
For model number RS675PXGB12
Hello Tina,
Thanks for your question. We do not show the drip bowl being a likely issue for the element not heating. The elements themselves or their switches would be much more likely. You may wish to test the switches and the elements with a multimeter to see if they have continuity, and replace them if they have no continuity.
I hope this helps.
My elements seem to be screwed into the drip pans. Are the drip pans needed different than these on your site?
For model number WFC150M0EB1
Hello Cynthia, Thank you for the question. Very sorry but checking the model number provided it does not show the element screw into the drip bowls. For more specialized assistance or to speak with someone about this, I would suggest calling the manufacturer of the appliance directly. Hope this helps!
Was this helpful?
Thank you for voting!
Tammy
November 6, 2019
What size drip pans i need to know the type of there are letterb
For model number WFC150moE1
Hello Tammy,
Thank you for your question. There are two kinds of drip pans for your model, the 6 inch pan under part PS2366565, and the 8 inch pan under part PS2366563 for your model. Hope this helps!
Hello Barbara, thank you for writing. We will need the model number for the range to look into this. Here is a link to some tips on our website for locating the model number on the range: https://www.partselect.com/Find-Your-Range-Model-Number.aspx. We look forward to hearing back from you!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
