Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
THOMAS L - February 20, 2021
Verified Purchase
Fit right and easy to swap out
Part arrived well packaged and looking great
★★★★★
★★★★★
PAUL H - February 24, 2018
Verified Purchase
Damaged upon receipt
The frame ordered was in worse condition than the original one that I damaged when I broke the glass. The box didn't have any external damage when it got here. When we opened the box later in the day we discored the frame was bent almost double on one of the bends that should have been 90 degrees and the other was damaged but not as bad.I have some sheet metal experience and I could fix it but the twist was too bad so I used my hand seaming tool and repaired the original part. It looked to me that when the part was boxed the twisted paper inner packing was pushed down too far almost as if it was supposed to be package that way.I would have thrown the new one away and written it off as a bad experience but my wife insisted we try and get our money back so I turned that over to her.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.9 / 5.0, 1 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Broken Handle
1. Order part 2. Remove 2 top screws holding vent cover and carefully remove cover 3. Open door all the way and lift, door will come of the microwave 4. Set door on a flat surface facing down 5. You will need a flat screwdriver,carefully set the screwdriver between the door and the black plastic and
... Read more pry out completely 6. Remove screws holding handle. (This will be a good time to clean the inside of this door) 7. Attach new handle tighten screws 8. Put black plastic back in door and press on all around make sure that is set in place 9. Re-install door and vent.
Read less
Robert from WATERTOWN, MA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
1 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Stephen
April 13, 2023
The white painted metal trim around the glass front of our LFEF3017LWB range is rusted (don't know why?). Can I easily disassembled the door and replace the trim or is the door sealed together with adhesive or caulk? At the same time I also need to replace the white plastic Oven Door Cap which has yellowed. Thanks for your assistance.
For model number LFEF3017LWB
Hello Stephen, Thank you for writing. To replace the trim you will need to remove the End Cap and handle. To do so you will need to remove the top screws on the inside of the door at the top corners that hold the handle and end cap in place. We hope this helps!
Do you stock a range oven door trim kit for this model
For model number 790.94142310
Hello James, Thank you for contacting us. I have researched the model you have provided and have found the part you’re looking for is PartSelect Number PS2364260. Good luck with the repair!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
