See part 3 in the diagram
( Grid squares measure 1x1 inch )
TRIM KIT-DOOR
$
50.86
On Order
On Order
Get this part fast. Average delivery time via standard shipping: 1.8 days.
PartSelect Number PS2364260
Manufacturer Part Number 5303935318
Manufactured by
Frigidaire
Troubleshooting
This part works with the following products:
Range, Wall Oven.
This part works with the following products:
Frigidaire, Kenmore, Crosley, Westinghouse.
Part# 5303935318 replaces these:
AP4433434, 5303935243, 5303935393
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
James
November 30, 2017
Do you stock a range oven door trim kit for this model
For model number 790.94142310
Hello James, Thank you for contacting us. I have researched the model you have provided and have found the part you’re looking for is PartSelect Number PS2364260. Good luck with the repair!
Was this helpful?
Thank you for voting!
Customer Repair Stories
Average Repair Rating: 3.9 / 5.0, 1 reviews.
What's this?
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Broken Handle
1. Order part
2. Remove 2 top screws holding vent cover and carefully remove
cover
3. Open door all the way and lift, door will come of the microwave
4. Set door on a flat surface facing down
5. You will need a flat screwdriver,carefully set the screwdriver
between the door and the black plastic and pry out completely
6. Remove screws holding handle. (This will be a good time to clean
the inside of this door)
7. Attach new handle tighten screws
8. Put black plastic back in door and press on all around make sure
that is set in place
9. Re-install door and vent.
2. Remove 2 top screws holding vent cover and carefully remove
cover
3. Open door all the way and lift, door will come of the microwave
4. Set door on a flat surface facing down
5. You will need a flat screwdriver,carefully set the screwdriver
between the door and the black plastic and pry out completely
6. Remove screws holding handle. (This will be a good time to clean
the inside of this door)
7. Attach new handle tighten screws
8. Put black plastic back in door and press on all around make sure
that is set in place
9. Re-install door and vent.
-
Robert from WATERTOWN, MA -
Difficulty Level:Easy -
Total Repair Time:15 - 30 mins -
Tools:Screw drivers -
Parts Used:5303935318
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer Reviews
Filter By Rating:
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
THOMAS L - 7 days ago
Fit right and easy to swap out
Part arrived well packaged and looking great
PAUL H - February 24, 2018
Damaged upon receipt
The frame ordered was in worse condition than the original one that I damaged when I broke the glass. The box didn't have any external damage when it got here. When we opened the box later in the day we discored the frame was bent almost double on one of the bends that should have been 90 degrees and the other was damaged but not as bad.I have some sheet metal experience and I could fix it but the twist was too bad so I used my hand seaming tool and repaired the original part. It looked to me that when the part was boxed the twisted paper inner packing was pushed down too far almost as if it was supposed to be package that way.I would have thrown the new one away and written it off as a bad experience but my wife insisted we try and get our money back so I turned that over to her.
Model Cross Reference
This part works with the following models:
PartSelect Number: PS2364260
Manufacturer Part Number: 5303935318
Manufacturer Part Number: 5303935318
Brand
Model Number
Description