Frigidaire/Frigidaire_Thumb/2QQ3O75W.gif
See part F26 in the diagram
Replacing your Frigidaire Range Oven Bake Igniter play video
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Oven Bake Igniter

★★★★★
★★★★★
15 Reviews
$ 124.61   In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS2364063
Manufacturer Part Number 316489403
Manufactured by Frigidaire
Product Description

Oven Bake Igniter Specifications

The oven burner igniter simply ignites the gas so it can heat the oven burner. The igniter does this by drawing electrical currents through the oven safety valve to open it. If the element shortens out, is no longer glowing, or is only glowing red or orange, replacing the igniter is the solution. You will need a wire splicing tool to do this repair. First, disconnect the wire harness from the igniter by removing the access panel on the rear of the stove. Next, access the front of oven and take out the racks before removing the bottom of the oven. For the rest of the installation instructions refer to the diagram provided by the manufacturer. Remember to unplug your oven from the power source before beginning this project.
How Buying OEM Parts Can Save You Time and Money play video

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Gas igniter glows | but will not light | Little to no heat when baking | Will Not Start
This part works with the following products:
Range.
This part works with the following products:
Frigidaire, Kenmore, Crosley, Electrolux.
Part# 316489403 replaces these:
AP4433236, 5304508786, 7316489403
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

14 questions answered by our experts.
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Tedd
January 13, 2018
Bottom burner won't ignite every time, but the igniter glows every time.These instructions recommend part number 26, but that looks like an igniter for the broiler burner.It looks like what I would need is part number 19, the igniter that goes on the bottom.Can you clear up my confusion.
For model number FPGF3081KFA
Hi Tedd, Thank you for the question. The bottom Bake Igniter is Part Number: PS11770500 for your model number. Hope this helps!

10 people found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Eddie
April 15, 2019
I hit the bake button, set the temp, hit the start button. It goes from 400 to 100 and doesn't heat. I do the clean mode, it goes through the motions, locks door but never heats. The setting for broil starts fine and works great.
For model number FGGF3058RFA
Hello Eddie, thank you for inquiring. For this symptom you will want to replace either the Oven Probe part PS11731755 or the Bake Igniter part PS2364063. We hope this helps.

7 people found this helpful.

Was this helpful?
Thank you for voting!
Karen
November 8, 2021
The broiler will heat and work. The bake will not heat at all. Is it the bake igniter we need? Please furnish the correct part number.
For model number LFGF3054TFA
Hello Karen, thank you for your question. We have researched the model you have provided, and we would suggest the Oven Bake Igniter, part number PS2364063. We hope this helps!

4 people found this helpful.

Was this helpful?
Thank you for voting!
Bouchiba
October 9, 2019
Hi I need to know please if the bake igniter is same the top of the oven and the bottom of the oven for propane stove.Thank you
For model number CPGF3081KFB
Hello Bouchiba, Thank you for the question. The igniters are different. The Broil igniter is PartSelect Number PS11770500 and the Bake is PartSelect Number PS2364063. Hope this helps!

3 people found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Chad
January 13, 2018
Oven burner will light on bake but will not on convection bake. Igniter will get red but you never hear the actuator ( don't know if this is the right term ) click to let gas into the burner. Do i need a new igniter? Or is this in the control panel? Thanks for your time.
For model number 790.74333310
Hello Chad, Thank you for your inquiry. We would recommend checking the following parts to fix your issue: igniter, oven probe, and control board. You can test the parts with a multimeter. If you are unfamiliar with how a multimeter functions, there are YouTube videos available to assist you. Hope this helps!

3 people found this helpful.

Was this helpful?
Thank you for voting!
Suzanne
January 6, 2020
My oven ignites but does not reach temperature before saying it's preheated. I have an oven thermometer in there. Says it's at 270 when oven says it's at 400. It will then continue to heat but not all the way. I can heat the gas igniting with a woosh when the burner comes back on. Sometimes the temp will go up, then the oven stops heating and the temp drops and it will not reignite. I have been told that because it is running off lp the orifice has to be cleaned of deposits periodically. Any ideas?
For model number 790.74339310
Hello Suzanne and thank you for writing. It certainly sounds like it could be a faulty bake ignitor PS 2364063, you should check for signs of damage, and replace if necessary. It is also possible the temperature sensor is defective. This part has been discontinued for your model and is no longer available. We have no known replacement information in our system. We recommend you contact the manufacturer of the part to see if they have recently released a new substitute. We hope this helps. Please contact us anytime if you require further assistance.

3 people found this helpful.

Was this helpful?
Thank you for voting!
Mike
March 4, 2020
Are you able to check resistance on the ignitor for my oven? I removed the ignitor from the oven. If you can do you know the resistance spec on the ignitor?
For model number CGGF3042KFJ
Hello Mike, Thank you for the question. The oven igniter should have a resistance reading of 3.2 to 3.6 ohms. If the igniter ohms out within the specification, measure the resistance of the oven safety valve. The gas valve should have 1.5 ohms of resistance. We hope this helps.

2 people found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Sam
November 22, 2017
Got new burner for oven can't find were to plug it in
For model number FFGF305LSF
Hi Sam, Thank you for your inquiry. There is a video on our website that you can reference on how to install the igniter. It may not look exactly like the one you have, but it will give you an idea on how to install it. You will find the video under part number PS1573892. I hope this helps. Thank you and have a great day!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Harry
December 10, 2019
Does the igniter for top and bottom the same on this oven ? The part number for bottom is 316489403 .
For model number LGGF2042KFT
Hello Harry, thank you for your question. The bake igniter is PartSelect Number: PS2364063 and the broil igniter is PartSelect Number: PS11770500 for this unit. Please enter the part number into the site for current price and availability. Good luck with your repair!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Sharon
December 14, 2019
Need a part number for the oven igniter
For model number CGGF3076KBH
Hi Sharon, this part is linked below. Thank you for your question and good luck with your repair!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Part Videos

Replacing your Frigidaire Range Oven Bake Igniter

Replacing your Frigidaire Range Oven Bake Igniter play video
Customer Repair Stories
 Average Repair Rating: 3.4 / 5.0, 9 reviews. What's this?
    Sort by:
    Sorry, we couldn't find any existing installation instruction that matched.
    Stovetop worked, oven did not.
    First, remove the warming drawer. This allows access to the igniter's plug. Unplug the igniter. The rest of the job is performed within the oven. Remove the bottom (1/4 inch socket). Then remove the next, v shaped piece. The igniter is bolted to the aerator. Remove bolts, and it pulls right off. Reverse these to install new igniter.
    • Sparky from ACCOMAC, VA
    • Difficulty Level:
      Easy
    • Total Repair Time:
      30 - 60 mins
    • Tools:
      Nutdriver, Socket set
    22 of 29 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    Oven would not heat up
    Tore the oven apart and replaced the igniter, then put the oven back together. Perhaps if Frigidaire manufactured an appliance that lasted longer than three years this wouldn't have been necessary. This is the second Frigidaire range that only lasted three years. Believe, the next stove we buy will definitely not be a Fridgidaire!
    • Charlotte from ROCHESTER, NH
    • Difficulty Level:
      A Bit Difficult
    • Total Repair Time:
      30 - 60 mins
    • Tools:
      Nutdriver, Pliers, Screw drivers, Socket set, Wrench set
    6 of 7 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    oven wouldn’t light
    Unplug oven to prevent shore. Make sure to purchase ceramic wire nuts to complete repair. No access to able to plug in the plug. Need to unscrew the plates in the bottom of the oven to get to the igniter. Cut the plugs off and use the ceramic wire nuts to connect the wires. Put make together. It took a Month for the part to arrive.
    • Annie from GILLETTE, WY
    • Difficulty Level:
      Very Difficult
    • Total Repair Time:
      1- 2 hours
    • Tools:
      Screw drivers, Socket set, Wrench set
    5 of 5 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    OVEN WOULD NOT HEAT UP OVER 100 DEGREES
    I "You Tubed" disassembly and commenced by disconnecting electric power. Removed door via You Tube instruction, removed back panels of unit, and replaced the oven temp probe. Easy Peasy. Then removed bottom of oven, next level above the burner and started to remove the igniter. One nut refused to be removed so I removed the burner and cut the nut and drilled it out. I reinstalled the new igniter with a metal screw from the rear panel and reinstalled the burner. Through the tiny hatchway I reconnected the new igniter and reassembled the oven to test. Just fine heated to 350 in 7 minutes. Awesome. Then, I called my brother, Pat, to give his imprimatur to the hillbilly nut switch. He said ok, I am done.

    To any reading this, I would order the igniter and the burner at the same time. That tough nut cost my one extra hour.
    Other Parts Used:
    Temperature Sensor
    • Lawrence from LIVINGSTON, NJ
    • Difficulty Level:
      A Bit Difficult
    • Total Repair Time:
      30 - 60 mins
    • Tools:
      Nutdriver, Pliers
    5 of 5 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    Stove stopped heating
    Removed old Oven Bake igniter, aligned it and installed the new Oven Bake Igniter.
    • James from HOUSTON, TX
    • Difficulty Level:
      Really Easy
    • Total Repair Time:
      30 - 60 mins
    3 of 4 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    The oven wouldn't lite.
    I follow the instructions that I received from the e-mail.
    • Carlton from VERMONTVILLE, NY
    • Difficulty Level:
      Really Easy
    • Total Repair Time:
      30 - 60 mins
    • Tools:
      Screw drivers, Socket set
    3 of 4 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    Our oven igniter went 6 months after we bought the appliance.
    I ordered the replacement igniter for the oven portion of the unit from Part select. It shipped very quickly. Upon receiving the igniter it was time to get to work. It took roughly 10 mins to replace and we were back up and running.
    • Jonathan from PITTSBURGH, PA
    • Difficulty Level:
      Easy
    • Total Repair Time:
      Less than 15 mins
    • Tools:
      Screw drivers, Socket set
    2 of 2 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    Oven would not light - no glow from ignitor
    Followed the instructions that were included in the package and it went very well with no problems. . . . .
    • Care Of Louann from LOS OLIVOS, CA
    • Difficulty Level:
      Really Easy
    • Total Repair Time:
      15 - 30 mins
    • Tools:
      Screw drivers, Wrench (Adjustable)
    1 person found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    Igniter Burned Out
    I followed the guidance of the YouTube video presented by Steve from your company. It was very easy and direct. The only issue I had was disconnecting the igniter clip, once I wa able to remove the old one, everything else was simple. I really appreciate this video because it saved me a ton of money for repair cost. I will use this process again even if it is my refrigerator because it is a Frigidaire also. Thanks to Steve who was very direct, on point, and patient with making this repair video. Kudos!
    • Mary from CLEVELAND, OH
    • Difficulty Level:
      Very Easy
    • Total Repair Time:
      15 - 30 mins
    • Tools:
      Pliers, Screw drivers
    1 person found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
      Customer Reviews
      Average Rating:
      ★★★★★
      ★★★★★
      15 Reviews
      4.1
      Filter By Rating:
      • 5 Stars
        9
      • 4 Stars
        2
      • 3 Stars
        1
      • 2 Stars
        2
      • 1 Star
        1
      Sort by:
      Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
      Model Cross Reference
      This part works with the following models:
      PartSelect Number: PS2364063
      Manufacturer Part Number: 316489403
      Brand
      Model Number
      Description
      Frigidaire
      30458356A
      Range - Range
      Frigidaire
      30458356B
      Range - Range
      Frigidaire
      30462042B
      Range - Range
      Frigidaire
      70462040A
      Range - Range
      Frigidaire
      70462040B
      Range - Range
      Kenmore
      79071342704
      Range
      Kenmore
      79071342705
      Range
      Kenmore
      79071342706
      Range
      Kenmore
      79071343706
      Range
      Kenmore
      79071343707
      Range
      Kenmore
      79071343708
      Range
      Kenmore
      79071343709
      Range
      Kenmore
      79071349704
      Range
      Kenmore
      79071349705
      Range
      Kenmore
      79071349706
      Range
      Kenmore
      79071362705
      Range
      Kenmore
      79071362706
      Range
      Kenmore
      79071362707
      Range
      Kenmore
      79071363708
      Range
      Kenmore
      79071363709
      Range
      Kenmore
      7907136370A
      Range
      Kenmore
      7907136370B
      Range
      Kenmore
      79071369705
      Range
      Kenmore
      79071369706
      Range
      Kenmore
      79071369707
      Range
      Kenmore
      79071382705
      Range
      Kenmore
      79071382706
      Range
      Kenmore
      79071382707
      Range
      Kenmore
      79071382708
      Range
      Kenmore
      79071383707
      Range

      Get in touch, we're here to help!

      Open until 1am EST

      Contact Customer Service