Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Willard M - February 26, 2022
Verified Purchase
Fix your own fridge door!
Take the door off to work on it. It takes a lot of hard pressing but keep at it. Works great!
★★★★★
★★★★★
Arthur A - July 6, 2020
Verified Purchase
Easy Repair, rated 8 out of 10. The Part 5 stars.
Hopefully, you're not doing this repair during the hot season. Whatever the situation is you need someone to help you to speed up the repair.
I did worry about the repair after because the replacement part was not sticking to the door well. I had to keep a chair to keep the door fully shut. All instructions were followed to the tee - the door seal was thicker compared to the old one, there is no adjustment with the door, even if there is I won't adjust it. Anyway, after a week the door started to stick by itself a bit better.
If another mishap with my refrigerator a new one will be in order.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.3 / 5.0, 2 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Getting the gasket into the tight groove.
Remove the fridge door and put it on the floor. Being able to apply lots of pressure helped get it into the tight groove. The corners were the hardest part. This requires strong "man" hands!
Willard from HUTCHINSON, KS
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
5 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door gasket was torn at bottom from food residue
When I did the repair,fortunate for me, a nice repairman was fixing my dishwasher. He said to put the new gasket in the dryer, while I removed the old one, to make it pliable and aid in sealing. I pulled the old gasket out of the retainer clip, cleaned around the area and snapped the new gasket into place(push the raised part into the g
... Read moreroove). The repairman said that food residue, especially at the bottom, caused a sticky glue-like film to form. He also advised to put smear vaseline on the new gasket and wipe it off to leave a film. This would aid in sealing and keeping new the gasket from sticking.
Read less
Jerry from Whitewright, TX
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
91 of 110 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
7 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Bret
October 2, 2019
Does the door seal come with the magnet strip?
For model number TBX14SYSFRAD
Hello Bret, Thank you for the question. Yes the Door Gaskets have the built in Magnetic strips. Hope this helps!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Ma
February 5, 2020
Is thus gasket part number is fit to my ge Hotpoint side by side refrigerator with despenser hss25fimcww (fresh door food) if its not? Can you please help me to find and is there any replacenent of the old part number? What is the aftermarket part number of the gasket. Just email me asap thanks.
For model number Wr24x10231
Hello, Thank you for your question. Can you please provide your model number of your refrigerator and I would be happy to verify this is the correct part. We are looking forward to hearing from you.
Was this helpful?
Thank you for voting!
Michael
October 14, 2021
i have plastic guides not metal have a hard time with it will not fit new gasket do i need different gasket
For model number htr16absdlww
Hello Michael, thank you for your question. Try soaking the gasket in hot water for about 5 minutes first. We hope this helps.
Was this helpful?
Thank you for voting!
Lily
January 25, 2023
Does this fit GE model number gts16dthjrww?
For model number GTS16DTHJRWW
Hi Lily, thank you for asking. This gasket is not listed as compatible with your model. The fresh food door gasket, part number PS11772253, fits your model. If you require assistance to place an order, please contact customer service. We hope that helps!
Need both freezer and bottom seal. What are the part numbers?
For model number IT14DKXRQ00
Hi Bobby, thank you for your inquiry. The part number for the fresh food door gasket is PS328691, and for the freezer door gasket is PS328705. We hope this is what you were looking for!
Please adviser dimensions of the hot point refrigerator door gasket. Is this gasket easy to install by a lay person? If available, would like to know total cost of gasket and shipping. Thank you.
For model number HTS16BBSARCC
Hi Connie, we do not have the dimensions for this part, we can confirm it is compatible with model HTS16BBSARCC. They are fairly easy to install, you just remove the old gasket place the new one in. With the basic shipping as of writing it is $65.05, however you may be charged taxes as well. Thank you for your question and good luck with your repair!
Was this helpful?
Thank you for voting!
Raymond
September 18, 2019
What are the measurements of the gasket. My unit is a two door side by side. Gasket is 19 3/4 in wide and 60 in long. Secured to with hex screw metal strip.
For model number CSX22GRXAA
Hello Raymond, Thank you for the question. Sadly, we do not have the dimensions for this part, although we can confirm this is the fresh food door gasket for model CSX22GRXAA. I recommend contacting the manufacturer and seeing if they could provide you with the dimensions of this gasket, and then you are always welcome to check back to see if we carry the part. Hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
