Get in touch, we're here to help!
1-866-319-8402
Monday to Saturday
8am - 8pm EST
Control Panel with Touchpad 5765M432-60
Easy
15 - 30 mins
Jump to:
Control Panel with Touchpad Specifications
How Buying OEM Parts Can Save You Time and Money
OEM stands for Original Equipment Manufacturer. Simply put, this means that the company who made your appliance is also supplying the replacement part for it.
- OEM from PartSelect
- Genuine brand name
- Guaranteed to fit
- Superior quality and durability
- 1 year warranty
- Generic
- Unknown manufacturer
- No fit guarantee
- Inconsistent quality and lifespan
- Limited warranty and support
- Will not program
- Touchpad does not respond
- Wall Oven
- Microwave Oven Combo
-
5 Stars 3
-
4 Stars 0
-
3 Stars 0
-
2 Stars 0
-
1 Star 0
- < Prev
- 1
- Next >
- < Prev
- 1
- Next >
- < Prev
- 1
- Next >
-
alfred from forest hill, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver, Screw drivers
Pull the oven roughly 1/3 of the way out.
There are two bolt screws on each side of the control panel that become visible upon pulling the oven out. Remove these bolts with a nut driver.
Carefully pull the panel 180 degrees downward and being careful wi ... Read more th the attached wiring.
Unplug the two strip cables going into the control box by lifting up on the plastic holders.
Find the outer-most bolts, 2 on each side of the control panel innards, and remove them and then remove the entire control panel.
Remove the silver heat shielding from the old control panel and put it in the same way on the new one. Re-connect the two strip panel cables the same way it was connected, make sure everything else is still plugged in!
Re-bolt the the panel to the control box with the 4 outer screws.
Line up control panel and re-bolt the 4 outer-screws on the side of the oven
Gently push the oven back in place.
Cook brownies to celebrate!!
-
David from San Diego, CA
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Wrench set
Remove the electronic circuit (including the clock) and install it on the new panel. connect the flat circuit ... Read more cables that connect the front panel to the electronic circuit.
Assemble the panel to the oven. connect the harnesses. close the cover and screw it. reconect the stove (gass and electric).
Done!
-
Julio from Chula Vista, CA
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers, Wrench set
- < Prev
- 1
- Next >
Ask our experts a question about this part and we'll get back to you as soon as possible!
- < Prev
- 1
- Next >
1 person found this helpful.
1 person found this helpful.
- < Prev
- 1
- Next >
Manufacturer Part Number: 5765M432-60
Get in touch, we're here to help!
1-866-319-8402
Monday to Saturday
8am - 8pm EST
Item is in stock and is estimated to be delivered in 2-3 business days via Standard Shipping.
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.