Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
George B - August 27, 2019
Verified Purchase
Part worked fine but had smaller problem
I thought the t'table motor was bad. Turned out it was the top micro switch on the door carrier that has the 3 micro switches mounted. One spade terminal was discolored. Recommend buying highest quality replacement parts to avoid what I did
★★★★★
★★★★★
Ross B - January 9, 2019
Verified Purchase
It was a quick fix. The part was new and working and a exact fit.
Now our microwave has the a turntable that turns again. Thanks for making my repair so easy.
★★★★★
★★★★★
William M - November 6, 2018
Verified Purchase
Easy Repair. Great Customer Service.
Brand new part.
★★★★★
★★★★★
Phillip E - September 15, 2018
Verified Purchase
the part worked fine and shipped very fast.
The part went in very fast.
★★★★★
★★★★★
Charles W. D - September 14, 2018
Verified Purchase
Excellent service
Fast shipping, part was as described.
★★★★★
★★★★★
Peter K - July 21, 2018
Verified Purchase
Easy repair
First tried new spindle since old motor turned, but spindle was too damaged. Needed new motor and this was exact fix
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 2.8 / 5.0, 1 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Turn table motor malfunctioning, noisy and intermittent.
My oven is installed above the counter making it a bit difficult to reach the screws closest to the wall. Instructions should note that both harnesses need to be disconnected and that there are two screws, not one holding the motor. This one issue made it frustrating since that screw is located towards the back away from your vision. Thi
... Read mores is when the flash light and a bit of contortions were required.
Read less
Susana from PHOENIX, AZ
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
5 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Steve
December 28, 2017
Looks like the turn table is not rotating. I can turn the shaft inside the microwave and makes a little clicking sound. Is the motor what I need? And if so, can I gain access via underneath and have the plate open, then unscrew the motor? Thank you
For model number JVM1790WK01
Hi Steve, Thank you for the question. Yes, I suggest replacing the Motor, Part Number: PS2355837. When working with microwaves you need to make sure the appliance is unplugged. To access this motor you will need to remove the bottom panel from the microwave. You will need a Philips head screw driver to remove the screws from the panel. Next disconnect the wire harness from the turn table. Remove the one screw holding the motor in place and turn the motor counter clockwise and pull down to release the motor from the base. Remove the glass tray from inside the microwave and hold the coupler down. Insert the new motor shaft through the base and into the bottom of the coupler. Rotate the motor clockwise to lock it back in place and install the motor mounting screw and wire harness. Replace the bottom panel and you will be set! This should be a pretty easy repair. Hope this helps!
5 people found this helpful.
Was this helpful?
Thank you for voting!
Maureen
January 7, 2019
Is this the motor that turns the turntable?
For model number JVM1790SK01
Hello Maureen, Thank you for the question. The turn Table motor is Part Number: PS2355837. Hope this helps, good luck with this repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Parora
October 25, 2017
Do you have instructions how to replace this turntable motor ? What is the difficulty level to replace it? Thanks!
For model number JVM1790SK01
Hi Parora, Thank you for the question. When working with microwaves you need to make sure the appliance is unplugged.To access this motor you will need to remove the bottom panel from the microwave. You will need a Philips head screw driver to remove the screws from the panel. Next disconnect the wire harness from the turn table. Remove the one screw holding the motor in place and turn the motor counter clockwise and pull down to release the motor from the base. Remove the glass tray from inside the microwave and hold the coupler down. Insert the new motor shaft through the base and into the bottom of the coupler. Rotate the motor clockwise to lock it back in place and install the motor mounting screw and wire harness. Replace the bottom panel and you will be set! This should be a pretty easy repair. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Clemmon
May 25, 2022
My Turntable stop turning and the microwave stopped heating at the same time! What could be the problem. Everything else works>
For model number JVM3162RJSS
Hello Clemmon, Thank you for your inquiry. We have researched the model you have provided and we would recommend checking the following parts to fix your issue: the turntable motor, the primary door switch, the monitor door switch, the diode, the thermostat and the magnetron. You can test the parts with a multimeter. If you are unfamiliar with how a multimeter functions, we have videos available to assist you. For safety reasons, since the microwave capacitor can still store electricity even when the microwave is unplugged, it is usually advised that you discharge the capacitor before any attempt at repair. We have included a link on how to do so. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Keypad fully functions as does lights and fan but microwave doent come on and turntable doesnt move but timer goes through count down
For model number PVM1790SR1SS
Hi Bob, thank you for your question. It sounds like you might want to take a look at your motor for being the issue. I hope that helps. Good luck with your repair.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
