The Grate Foot is a black rubber part which attaches underneath the grate in order to protect your stovetop from being scratched, which it does by cushioning the grate on your gas range. If this part appears visibly broken or no longer holds in place, which can happen to these feet over time, then it should be replaced. Check your model number and user manual to see if this part is right for you. Because this part is sold individually, make sure to order the quantity that you require. We generally recommend checking all of the grate feet on your appliance and replacing them at the same time, since it is an inexpensive part and they tend to wear out at around the same rate. Spares are good to have in the event of future failures. Before beginning this repair, ensure that the surface is cool to the touch. Simply pull the worn or cracked foot out and install the new grate foot. This process should not require any tools or accessories.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Barbara
November 21, 2017
How many grate foot come in an order?
For model number JGP329SET3SS
Hi Barbara, Thank you for the question. According to the online description,this part is sold individually.Hope this helps!
12 people found this helpful.
Was this helpful?
Thank you for voting!
Douglas
October 9, 2017
What type of glue works best on the grate foot? Thanks.
For model number WB02T10461
Hi Douglas,
Thank you for your inquiry. You should need no glue to install the part. Just insert the new grate feet right on the grates. I hope this helps. Thank you and have a great day!
6 people found this helpful.
Was this helpful?
Thank you for voting!
Mark
November 19, 2017
The control panel does not work at all. The burners can be lit with a match, but the igniter does not work also. I tried pressing the range lock out for 3 seconds, and also 9 0 for 3 seconds. I also tried unplugging the range for a while. I am sure i have power and gas. Thank you.
For model number PGS975SEP3SS
Hi Mark,
Thank you for your question. It is likely that you will have to replace your electronic control board if your control panel is not functioning at all. I hope that helps. Good luck with your repair.
3 people found this helpful.
Was this helpful?
Thank you for voting!
John
February 25, 2018
In package
Grate foot
Part number: Ps2353327 how may come to one pack
For model number JGP975SEK1SS
Hi John, Thank you for the question. According to the online description for this foot," Because this part is sold individually, make sure to order the quantity that you require." Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Dave
January 25, 2022
1. How many grate feet/pkg? (doesn't say); also, $6 for how many? 2. Where's the WB00X7108 - 2oz tube of adhesive? Thx, - - dk - - Model is a GE Profile gas cooktop....No #....I can try to send a picture
Hello Dave, Thank you for the question. According to the discription "Because this part is sold individually, make sure to order the quantity that you require." In order for us to locate the correct parts and repair information we will require the model number of the unit. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. We are looking forward to hearing from you!
Was this helpful?
Thank you for voting!
Barb
April 11, 2022
Is the price really ONE knob for $8.00
For model number PC2S930SEL3ss
Hello Barb, Thank you for the question. The Grate Foot is sold individually. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
Susan
2 days ago
Does part PS2353327 fit this model? If not, what part does?
For model number KSGG700ESS1
Hello Susan, thank you for your question. The correct part for your model is PS988447. They are sold as a kit of 4 Grate pads. We are pleased to have been able to help.
Hello Carla, Thank you for the question. This Grate Foot is sold individually. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
The cooktop had a shorted out burner control.
Unpllug the cooktop and turn off the gas supply. Remove the grates and burners.(they just lift out). Using a torx screwdriver, remove all the torx screws below where the burners sit. There are three screws per burner, except the power burner which has only two screws. Genly lift the stainless steel cooktop, separating it from the rest of the enclosure. Hold the electrodes with one hand, while gently twisting and pulling the wire connector off. Now, remove the aluminum covered foam piece. You will now have acess to the wiring harness assembly. Disconnect the quick connectors and replace with the new assembly. Re-assemble in the reverse order and you're done. About 1.5 to 2 hours. Good Luck
A rubber grate foot on my range top had worn out. I pulled the worn foot out and installed the new grate foot with no tools or accessories. Good as new! Now I don't have to worry about the grate scraping my range top and scratching the paint. I also ordered extras so I won't have to wait if another wears out.
Upper left rack roller broke, had to replace rack adjuster assembly
First I had to take out the end caps on both sides of the upper rack - easy enough - you push in the direction of the arrows and they open up and come off. Then I took the rack off. Using the smallest allen wrench I could find in my ex-husband's set that he left behind (yay!), unscrewed the old rack assembly. The (blue) adjuster level doohickey popped out when the old assembly came off, but it was easy enough to fit that back in properly by looking at the right-hand one that was still in place. All I had to do was fit the new rack assembly into place, put back a few screws, and slide the rack back into place. Put the end caps back on and you're done. Maytag should offer free replacements for this part, IMO- the wheels are too flimsy to begin with, our dishwasher is only four years old, and the new part is pricey, at $29.45 a pop.
After my housecleaner had been here, I noted that 2 of the little rubber feet were missing from the top grates.
I was pretty upset as the grate wobbled, so I went on line and looked for GE Profile parts. To my amazement, I found the little rubber feet quite easily, and within 2 days they were here at my home. I simply had to stick them in the holes; however, I noted that they did not fit real tight, so I removed them and shot a little glue on them, and they have been in place ever since. Thanks to you guys, I am a happy camper now!!!
Anne from Jacksonville, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Rubber Grate foot worn or missing.
Replaced worn or missing Grate Foot with new ones. Took less than 5 minutes.
Terry L from Puyallup, WA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
2 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
feet keep falling off
Inserted the grate foot into the spot provided; after consulting the parts manuel to insure I was using the proper procedure.
I do use silicone to help hold the foot but it still won't hold
Richard from Stratham, NH
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
2 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Rubber grate foot failed
Cut off approx. 1/8" in length for correct fit.
Gary from HENDERSONVLLE, NC
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Yellow flame on large burner
Removed top grate. Removed burner head . replaced with new burner head. Replaced grate.Very simple replacement. Old burner head was warped with age.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Michael E - October 20, 2020
Verified Purchase
Small part, big deal
When you need something you need it. Easy to find in the database. Delivered quickly.
★★★★★
★★★★★
Barb T - June 2, 2020
Verified Purchase
Was too small
Was to small for holes in my grates.
★★★★★
★★★★★
Glenn R - January 1, 2020
Verified Purchase
Wrong Part
The four Grate Foots that were shipped to me don't match what was original. These are smaller and do not fit snuggly in the grate. They will not work,
January 2, 2020
Hello Glenn,
Thank you for leaving a review on the part ordered. I have sent you an email in regards to the order and how to return for a refund. Hope to hear from you!
★★★★★
★★★★★
Bruce B - September 24, 2019
Verified Purchase
Easy to install
Easy to install, equally easy to knock out and lose when cleaning.
★★★★★
★★★★★
Lisa L - September 11, 2019
Verified Purchase
Just what I needed to repair cooktop grate
The rubber feet were exactly what I needed to replace one lost from my cooktop grate. Only reason it didn't get five stars is that the foot does not fit snugly enough into the hole to keep it in place (perhaps even manufacturing defect in grate itself?) Had to use heat-resistance silicone to glue it in. Part matched old GE feet exactly, though.
★★★★★
★★★★★
Joseph N - December 10, 2018
Verified Purchase
feedback on gratefoot
a grate-foot is a tiny round piece of rubber fits under grate so not to scratch. The "1" one I received:
1. grate-foot too small... fits way too loose in its recess [recess size checks ok]....its the only grate foot that constantly falls out... will NOT stay in place. 2. grate-foot overpriced! for the price charged you should give at LEAST "10" in a package.. not just one 1; and "one" that does not fit properly at that. If I could rate it less than one I would
★★★★★
★★★★★
Joseph M - November 26, 2018
Verified Purchase
Snap repair
The part was a simple rubber plug that fit into leg/prong of burner grate. Hard to mess up.
★★★★★
★★★★★
Tom S - November 20, 2018
Verified Purchase
Part was exact match to original
One of the grate foot pads had broken off and the grate was metal on stove top with possibility of chipping porcelain. The part Select site allowed me to quickly find the replacement part from the model number and they fit perfectly when I received them.
★★★★★
★★★★★
RANDI M - April 28, 2018
Verified Purchase
Easy fix
I received the parts very promptly. They are very easy to use. I just would like to know why they keep falling off, which is why I purchased so many. Is there a trick I’m missing!?
May 2, 2018
Hello Randi, thank you for your feedback. Sometimes, the grate feet need to be glued into the holes of the grates. The adhesive is part number W10841140. I hope this helps!
With our Fix app model plate image recognition technology, we'll recommend the parts guaranteed to fit your appliance. Simply snap a photo, and we'll take care of the rest.
"I love love love this app. It's so nice to have useful information (receipts, manuals, parts lists, warranty info, pictures, etc.) on all of my household appliances and devices in one place."
You added to your cart
✖
$
Qty:
Total item(s) in cart:
Order Subtotal
$
*Taxes and shipping will be applied during checkout
