Frigidaire/Frigidaire_Thumb/WQZXPUAZ.gif
See part 15 in the diagram
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Spark Module

★★★★★
★★★★★
2 Reviews

Rated by 2 customers 

Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your E30GF74HPS2!
 Fits your E30GF74HPS2!
PartSelect Number PS2350722
Manufacturer Part Number 316135702
Manufactured by Frigidaire
Product Description

Spark Module Specifications

This spark module or range spark module, is used in ranges and ovens. The spark module monitors and controls the spark to ignite the surface burner in a range. It does this by sending a certain amount of current to the igniter to produce that spark. If you are not getting any spark to the igniters then it is best you replace this part with a new spark module. To repair, first remove the access panel at the back of your range with a 1/4 inch nut driver to take the screws out. Next, disconnect the power harness that connects the range to the power cord to access the spark module. Take wires off using needle nose pliers and pull the spark module off the range. Match and hook up the wires to the new part. Refer to the manual provided by the manufacturer for further installation instructions and guidance.
How Buying OEM Parts Can Save You Time and Money play video

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Will Not Start | Gas igniter glows | but will not light
This part works with the following products:
Range, Cooktop, Microwave Oven Combo.
This part works with the following products:
Frigidaire, Kenmore, Tappan, Crosley.
Part# 316135702 replaces these:
AP4374595, 1483923, 08067972, 316135701, 316T033P01, 5303207522, 5303209028, 5303280394, 7316135702, 8067972
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

9 questions answered by our experts.
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Anser
January 13, 2020
I have a Frigidaire gas stove which has all the igniters sparking all the time when the stove is plugged in. All the knobs are in the off position. What can the issue be? Could it be the wiring harness or the spark module?
For model number FGF366CSC
Hello Anser, Thank you for your question. Our sources suggest its likely a defect in the spark module under part PS2350722 for your model that's causing the issues with each igniter. We hope this helps!

3 people found this helpful.

Was this helpful?
Thank you for voting!
Alan
April 14, 2018
The R. Front burner will not ignite-no spark. Will light with a match. There is spark on all of the other igniters.Would this be the module or would it be the igniter at this burner?
For model number 790.71542601
Hi Alan, Thank you for the question.This sounds like a defective spark electrode. The electrode is only sold as part of the Surface Burner Orifice Holder, PartSelect Number: PS439987/ Hope this helps!

3 people found this helpful.

Was this helpful?
Thank you for voting!
Katie
November 21, 2019
Hi, i have a Kenmore gas oven. The top burners work okay. However, the oven will not light. With thanksgiving next week, i need my oven! Can somebody please tell me the correct name of the part &/or its number? Please? As soon as you're able, would be so appreciated. Thank you for your time and consideration! Katie d.
For model number 79071202703
Hello Katie, Thank you for your question. You likely need to replace the oven temperature sensor under part PS12724046 for your model to fix the oven. Hope this helps!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Freddy
7 days ago
Hi. The left Front and Right back burner will not spark of my Kenmore elite stove.I can hear and smell the gas. Will light with a match. There is spark on the other 2 burners. Would this be the module igniter for this burner and where in the stove is this part? Thank you I’m advance.
For model number 79046813992
Hello Freddy, thank you for your question! The issue seems to be with the spark module and you may need to replace it, the part number is PS2350722. The Spark module controls the spark for lighting the surface burners and is located at the back under the access panel. If you need help placing an order, customer service is open 7 days a week. Thanks again for your great question.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Joseph
July 15, 2021
Burner will not light unless I sand this part at burner, will be good for a few lights, other 3 burners lit good.
For model number 790.79014102
Hello Joseph, Thank you for the question. We suggest replacing the Spark Igniter for the Burner you are having the issues with. We hope this helps!

Was this helpful?
Thank you for voting!
Related Parts:
Don
October 4, 2021
No electronic igniters work or click for burners or oven you can light the burners with a match when the knob is turned on
For model number 30-3352-23-04
Hello Don, Thank you for the question. This is normally an indication the Spark Module is defective and needs to be replaced. We hope this helps!

Was this helpful?
Thank you for voting!
Related Parts:
Robert
December 5, 2022
All the stove top burners are difficult to ignite. Must push burner knob(s) in and turn several times before they spark. And then, at times, they continue to spark after the burner(s) ignite. Also, infrequently, some of them will not ignite at all. What could be causing this problem???
For model number FGF337GCF
Hello Robert, thank you for asking. According to our research, we would recommend checking the following parts to fix your issue: spark module, part number PS2350722, regulator, part number PS16218309, and safety valve, part number PS446204. If you need help placing an order for it, please feel free to give us a call. We look forward to hearing from you!

Was this helpful?
Thank you for voting!
Related Parts:
Blaine
December 17, 2018
One rear igniter is not sparking, but there is continuity from the coil to the igniter tip, so i am thinking we need to replace the coil? Can one coil output be dead while the remaining three still produce a spark?
For model number 790.75762001
Hi Blaine, Thank you for your question. If one of the burners is not sparking, the issue may be the switch for the that burner that is attached to the wire harness. The park igniter would be another part that you will need to check. I hope this helps. Thank you and have a great day!

Was this helpful?
Thank you for voting!
Jose Nava
March 4, 2019
Spark keeps sparking on all 4 burners every few minutes?
For model number FGF337ASD
Hello Jose, there may be a leaking or debris inside the range, or you may need to replace your igniter orifices for each one if there is obvious damage, or decay. Hope this helps!

Was this helpful?
Thank you for voting!
Customer Repair Stories
 Average Repair Rating: 3.3 / 5.0, 2 reviews. What's this?
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
burner ingnighter would not lite burner
Replaced the ingintion module, still did not work, replaced the burner complete with new ingiter , it now works but another one quit . the front right one has 5 ohms resistance ,replaced with new one with 0 ohms, the back left has 2 ohms resistance and now it does not work , will need to replace that burner allso. too bad you can't buy just the spark module for the burner.
  • Wayne from Palestine, IL
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers, Wrench (Adjustable)
30 of 86 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Top burners were not lighting without a match
Was easy...I pulled oven out from the wall so I could get to the back.i used a nut driver to remove small silver cover.matched up wires to the never module and re installed.pluged oven back in and burners lit perfectly
  • Earl from ALLIANCE, OH
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer Reviews
Average Rating:
★★★★★
★★★★★
2 Reviews
5.0
Filter By Rating:
  • 5 Stars
    2
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Model Cross Reference
This part works with the following models:
PartSelect Number: PS2350722
Manufacturer Part Number: 316135702
Brand
Model Number
Description
Tappan
14-3083-00-01
Cooktop - Gas
Tappan
14-3083-08-01
Cooktop - Gas
Tappan
14-3083-18-01
Cooktop - Gas
Tappan
14-3083-23-01
Cooktop - Gas
Tappan
14-3088-00-02
Cooktop - Gas
Tappan
14-3088-00-03
Cooktop - Gas
Tappan
14-3088-00-04
Cooktop - Gas
Tappan
14-3088-08-03
Cooktop - Gas
Tappan
14-3088-08-04
Cooktop - Gas
Tappan
14-3088-18-04
Cooktop - Gas
Tappan
14-3088-23-02
Cooktop
Tappan
14-3088-23-03
Cooktop - Gas
Tappan
14-3088-23-04
Cooktop - Gas
Tappan
14-3088-32-02
Cooktop
Tappan
14-3088-45-02
Cooktop
Tappan
14-3088-57-02
Cooktop
Tappan
14-3088-66-02
Cooktop
Tappan
14-3088-66-03
Cooktop - Gas
Tappan
14-3089-00-01
Cooktop - Gas
Tappan
14-3089-00-03
Cooktop - Gas
Tappan
14-3089-00-04
Cooktop - Gas
Tappan
14-3093-00-01
Cooktop - Gas
Frigidaire
2343-87A
Range - GAS RANGE
Frigidaire
2467A
Range - GAS RANGE
Frigidaire
2568A
Range - GAS RANGE
Frigidaire
2568B
Range - GAS RANGE
Frigidaire
2822A
Range - GAS RANGE
Frigidaire
2823
Range - GAS RANGE
Frigidaire
2823-80B
Range - GAS RANGE
Frigidaire
283440A
Range - GAS RANGE

Get in touch, we're here to help!

Open until 1am EST

Contact Customer Service