Part Location Diagram of WB1X1293 GE Ignitor Mounting Screw
See part 28 in the diagram
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

customerservice@partselect.com

Ignitor Mounting Screw WB1X1293

 Fits your JGBC17GER2!
★★★★★
★★★★★
2 Reviews

Rated by 7 customers 

Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

$ 9.63
  In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your JGBC17GER2!
PartSelect Number PS234519
Manufacturer Part Number WB1X1293
Manufactured by GE for General Electric, Kenmore, Hotpoint, Roper
Product Description

Ignitor Mounting Screw Specifications

Sold Individually.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Little to no heat when baking
This part works with the following products:
Range, Wall Oven, Cooktop, Range Hood.
Part# WB1X1293 replaces these:
AP2008317, 243500, 105771, 231703, 325667, 8004498, 8004778, WB01K0050, WB01X1293, WB1K50
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
2 Reviews
3.0
Filter By Rating:
  • 5 Stars
    1
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    1
Sort by:
  • 1
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
Customer Repair Stories
 Average Repair Rating: 3.3 / 5.0, 7 reviews. What's this?
Sort by:
  • 1
Sorry, we couldn't find any existing installation instruction that matched.
gas smell during cooking
Changing out the burner assembly completely fixed the gas smell issue. The burner was deformed and rusted in the area adjacent to the igniter. The oven burns properly now, and no extra gas smell exists.
Other Parts Used:
BURNER OVN BAKE Assembly Ignitor Mounting Screw
  • William from ANGELS CAMP, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven not warming up
Removed the drawer at the bottom of the stove, then removed plate in rear covering the wires. unplugged the 2 wires coming from Igniter, then removed 2 1/4" srews holding the ignitor in place, took the old Ignitor and cut the 2 wires and spliced them to the new Ignitor reinstalled the new Ignitor in reverse order of removal. Saved over $110.00.
Other Parts Used:
Round Style Oven Igniter Ignitor Mounting Screw
  • Anthony from Brooklyn, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven would not heat
This would've been an easy repair, but I ran into some complications.

First I removed the thumb screws holding the bottom oven pan, took the pan out, and also took the bottom panel off the front of the oven.

This gives you access to the burner assembly. I disconnected the wire to the ignitor. I then removed one screw at the front, and two in the back of the burner assembly with a 1/4 socket wrench.

The burner assembly came out. I tested the ignitor for continutiy with a multimeter to ensure this was the faulty part. There was not continuity, so I knew the ignitor needed to be replaced.

This was when I tried to unscrew the ignitor, and both screws stripped their threads on the burner mounting plate. Complication #1. Seems with age, that mounting plate tightened up on the screws.

I cut the screw heads off with a dremel and cutting wheel to get them out. I'm glad I did this before ordering the new part because I needed to order the replacement screws too.

The burner mounting plate for the ignitor needed to be re-tapped to get the new screws in with a 10-32 tap and power drill.

Once the mounting plate was properly rethreaded, I attached the new ignitor, and reattached the burner assembly to the oven.

When trying to connect the wires, the plastic connectors wouldn't click together. They matched up fine, but wouldn't go all the way in. Complication #2. While the plastic connectors were properly mated, the inside pins were both female. The old ignitor had male pins on it, the new one had female pins. So I removed the burner assembly again, cut off the new ignitor connector and spliced in the old ignitor connector with the included porcelain wire nuts.

I put the oven back together again, fired it up, and it worked great.
Other Parts Used:
Ignitor Mounting Screw Flat Style Oven Igniter Kit
  • Andrew from Alexandria, VA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Socket set
6 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven wouldn't ignite, but everything else worked.
There are 2 screws to remover to replace the element. That was the hard part as they were very stubborn to get out. I have to use a flexible bit and an impact driover to get them loose. Other than that, the replacement was smooth as silk !!
Other Parts Used:
Oven Igniter Ignitor Mounting Screw
  • Rick from Kent, WA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers, Wrench (Adjustable)
12 of 13 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The igniter (glow bar) on the oven failed so the oven would not ignite.
After removing two layers of the oven floor I could not get at the igniter's wire connections. I found out that the new igniter was shipped with two wire nuts made of porcelain instead of plastic, so they were heat tolerant. Because of this, I was able to unscrew the original part and just cut the wires. I then installed the new igniter and spliced the wires of the new part to the cut wires that lead to the old part using the porcelain wire nuts and tucked the connections out of harms way. It worked fine.
Other Parts Used:
Round Style Oven Igniter Ignitor Mounting Screw
  • Daniel from Jamison, PA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Socket set
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven Igniter Died
The only difficult part of the repair was getting the original screws out of the old igniter and oven gas arm. Once I drilled the old screws out the repair was done within 20 minutes.
Other Parts Used:
Oven Igniter Ignitor Mounting Screw
  • CHRISTOPHER from REDMOND, OR
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Socket set
22 of 23 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
bottom igniter died
Getting the original screws out was a pain, but once I got them out I disconnected to old wires and attache the new wires. Installing the new igniter was VERY easy compared to removing th original one!
Other Parts Used:
Ignitor Mounting Screw Oven Igniter
  • Craig from Hillsboro, OR
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Pliers, Socket set, Wrench set
10 of 12 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

1 question answered by our experts.
Sort by:
  • 1
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Daniel
March 9, 2023
What are the specs for the igniter mounting screw?
For model number JGSP481SHSS
PartSelect logo
Hi Daniel, thank you for your question. There are two igniter mounting screws and the size of the screw is 1/4". We hope that helps!

Was this helpful?
Thank you for voting!
  • 1
You May Also Need ?
Model Cross Reference
This part works with the following models:
PartSelect Number: PS234519
Manufacturer Part Number: WB1X1293
Brand
Model Number
Description
Kenmore
1033227790
Range
Kenmore
1033227810
Range
Kenmore
1033227890
Range
Kenmore
1033247200
Range
Kenmore
1033247290
Range
Kenmore
1033247300
Range
Kenmore
1033247301
Range
Kenmore
1033247311
Range
Kenmore
1033247321
Range
Kenmore
1033247341
Range
Kenmore
1033247361
Range
Kenmore
1033247390
Range
Kenmore
1033247391
Range
Kenmore
1033247510
Range
Kenmore
1033247512
Range
Kenmore
1033247520
Range
Kenmore
1033247540
Range
Kenmore
1033247560
Range
Kenmore
1033247591
Range
Kenmore
1033247593
Range
Kenmore
1033247810
Range
Kenmore
1033247812
Range
Kenmore
1033247891
Range
Kenmore
1033248010
Range
Kenmore
1033248091
Range
Kenmore
1033248092
Range
Kenmore
1033248210
Range
Kenmore
1033248290
Range
Kenmore
1033248291
Range
Kenmore
1033277005
Range
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

Contact Customer Service