Float Switch Kit W10202535 | Official Whirlpool Part | Fast Shipping | PartSelect
Float Switch Kit – Part Number: W10202535
Float Switch Kit – Part Number: W10202535 Float Switch Kit – Part Number: W10202535 Float Switch Kit – Part Number: W10202535 https://partselectcom.azureedge.net/Schematics/Maytag/55660.gif

Float Switch Kit

Product Description

Float Switch Kit Specifications

Water that fills your dishwasher lifts this float, and when it reaches a certain level, it acts as a trigger for the float switch. The float triggers the switch to shut off, thereby shutting off the flow of water into the dishwasher.

How Buying OEM Parts Can Save You Time and Money

Troubleshooting

This part fixes the following symptoms:

Leaking | Will not fill with water | Not draining

This part works with the following products:

Dishwasher.

This part works with the following brands:

Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Crosley, Whirlpool.

Part # W10202535 replaces these:

1472642, 99002630, 99002631, 99003080, AP4366557, W10130095.
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Part Videos

Replacing your Maytag Dishwasher Float Switch Kit

Customer Repair Stories
Average Repair Rating: 3.7 / 5.0, 6 reviews What's this?
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Jessica from Lovington, IL
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set
Parts Used:
W10202535
leak in front right corner
I had to remove the 4 screws holding the toe panel. Then I had to take out the one screw holding the floater switch housing in place. It snapped open to release the floater and that just lifted out. I put the new float in and snapped the new housing on. I put the screw back in to hold the housing in place attached the two wires to the switch and put the toe panel back on. It was all very easy to do and my first home repair went very well. thank you.
37 of 45 people found this instruction helpful.
Was this instruction helpful to you?
Ralph from Taft, CA
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Wrench (Adjustable), Wrench set
Parts Used:
W11082871, W10202535
Very little water going into the dishwasher
Unpluged the electric, Disconnected the water line and the drain line. Removed the dishwasher. Removed and installed the new water inlet valve and the float switch. This was a very simple repair. Reinstalled the dishwasher and connect
the water and drain line. Pluged in the power line. Turned the dishwasher on and it worked perfect. Thank you for the correct parts.
11 of 15 people found this instruction helpful.
Was this instruction helpful to you?
Gary from Pueblo, CA
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Screw drivers, Socket set, Wrench (Adjustable)
Parts Used:
W10202535, 99002701
leaking.
Removed the bottom cover.with a flashlight and a mirror found the problem. Went to Maytag they told me that in 8 warehouses there were no parts. They did give me a enlarged view of the part that I needed. went on the computer to PartSelect called PartSelect talked to a very helpfull Lady ordered my parts. Job is done Mama's happy Lifeis good. Thank You
11 of 25 people found this instruction helpful.
Was this instruction helpful to you?
David from Farmingdale, NJ
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set
Parts Used:
W10202535
Machine would not fill with water
Remove the 4 screws at the lower panel, turn power off to dishwasher, remove single 1/4 attaching screw from float switch, open the door remove the old float assembly. Make sure you install the float in the machine first than side the switch over the end of the float before screwing it back in.
10 of 15 people found this instruction helpful.
Was this instruction helpful to you?
ROY from MERKEL, TX
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers, Socket set
Parts Used:
W10202535
Water would not go to dishwashe
Took the dishwaher apart. Found out the float was damaged. Replaced the float and the float switch. Put back together
9 of 18 people found this instruction helpful.
Was this instruction helpful to you?
Janice from Parker, CO
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Wrench (Adjustable)
Parts Used:
WPW10192799, W10202535
constant crud on glasses
Accumulator was as easy as just removing srews and replacing the part. The Float I broke by accident and was more complicated to replace required 2 people to manage parts.
Dishes finally coming out clean!
8 of 15 people found this instruction helpful.
Was this instruction helpful to you?
Model Cross Reference

This part works with the following models:

PartSelect Number: PS2344786
Manufacturer Part Number: W10202535
Brand
Model Number
Description
Amana
ADB1200AWB
Dishwasher - Tall Tub
Amana
ADB1200AWQ
Dishwasher - Tall Tub
Amana
ADB1200AWS
Dishwasher - Tall Tub
Amana
ADB1200AWW
Dishwasher - Tall Tub
Amana
ADB1500AWB
Dishwasher
Amana
ADB1500AWB0
Dishwasher - DISHWASHER
Amana
ADB1500AWB1
Dishwasher - DISHWASHER
Amana
ADB1500AWB10
Dishwasher
Amana
ADB1500AWB2
Dishwasher - UNDERCOUNTER DISHWASHER
Maytag
ADB1500AWB3
Amana
ADB1500AWB37
Dishwasher
Amana
ADB1500AWB41
Dishwasher - DISHWASHER
Amana
ADB1500AWB46
Dishwasher - DISHWASHER
Amana
ADB1500AWQ
Dishwasher
Amana
ADB1500AWQ0
Dishwasher - DISHWASHER
Amana
ADB1500AWQ1
Dishwasher - DISHWASHER
Amana
ADB1500AWQ10
Dishwasher
Amana
ADB1500AWQ2
Dishwasher - UNDERCOUNTER DISHWASHER
Whirlpool
ADB1500AWQ3
Amana
ADB1500AWQ37
Dishwasher
Amana
ADB1500AWQ41
Dishwasher - DISHWASHER
Amana
ADB1500AWQ46
Dishwasher - DISHWASHER
Amana
ADB1500AWS
Dishwasher
Amana
ADB1500AWS0
Dishwasher - DISHWASHER
Amana
ADB1500AWS1
Dishwasher - DISHWASHER
Amana
ADB1500AWS10
Dishwasher
Amana
ADB1500AWS2
Dishwasher - UNDERCOUNTER DISHWASHER
Amana
ADB1500AWS3
Amana
ADB1500AWS37
Dishwasher
Amana
ADB1500AWS41
Dishwasher - DISHWASHER