Broil Element - Push On Terminals W10201551

Hi Kris, Thank you for the question. Yes you can reach into the oven and remove the element from the front. Most find it easier to go in through the back, it is easier to reach and you can avoid leaning on the door and damaging the hinges. You just need to reach in and remove the screws from the bracket at the back of the oven and from the bracket that holds the element to the top of the oven. Once the screws are removed you can pull the element out and you will see the wires hooked to the element terminals. I suggest getting a close pin or a clip to hold the wires and prevent them from falling back through the hole and into the back of the appliance.Hope this helps!

Hello Jim, Thank you for your question. The broiler element under part PS2342087 is for the upper oven, and the broiler element under part PS11752536 is for the lower oven. Hope this helps!

Hi Jim, We would be happy to do some research to find you the correct parts. However, we need your model number and the brand name to locate any information on this. Model numbers can be short or long, and could have a mixture of numbers and letters. Thank you for your question and good luck with your repair!

Hello Bonnie, Thanks for your question. Given that you replaced the sensor it is likely the broil element that will need to be replaced. We would recommend doing so. I hope this helps.

Hello Sophie, thank you for writing. We would be happy to look into this, but we will need the model number of your oven to do so. We look forward to hearing back from you.

Hello Roger and thank you for writing. According to our database, the model number you provided is just a portion of a model number with multiple possible variations. To ensure that we recommend parts that will work for your model, please check your information again; you will need to provide us with the full model and serial numbers located on the sticker on the unit itself. Once we have that information, we would be happy to find the part you need. We cannot find parts based on part dimensions as even parts that are the same size can have small differences that make them incompatible with your model. We strictly match parts to models. Thank you for your question and good luck with your repair! We do carry related parts for units just like yours. For example, part number PS11744518. Good luck with your repair.

Hello Warren, thank you for your question. The broil element for the upper oven is Part #: PS2342087. Please enter the part number into the site for current price and availability. Good luck with your repair!

We do not have any information on model 629JDR8895AAB. However, for model MER6765BAQ17 the broil elements have two different part numbers. For the Upper Oven, the Broil element is part PS2342087. For the Lower oven the Broil element is part PS11752536. Could you please verify the number you provided us with? If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.

Hi Gary, thank you for the question. We have researched your model and found the Broil Element you are looking for, the part number is PS11752536. If you need help placing an order for it, please feel free to give us a call. We look forward to hearing from you!

Hello Emily, thank you for your inquiry. You can replace the broil element yourself by following these instructions: 1. Open up the oven door and pull the oven racks out. 2. Remove all the screws holding the bracket and carefully pull the element out. 3. When pulling out the element, carefully remove the wires of the element from connectors and make sure the connectors do not fall to the rear side of the oven. 4. Follow the same procedure backwards to install the new element. We hope this information helps!