The “Icemaker Control Assembly” (Module & Motor Assembly, Ice Maker Control Module, Icemaker Module, Refrigerator Ice Maker Module) is what controls the actions of your ice maker. The control turns the timing cams and the ejector blades. It controls most of the basic parts and functions such as the heater, water inlet valve, the cube size, and cube ejection. If your ice maker control is broken it can no longer properly control the ice maker functions. It may not produce any ice, make small ice cubes, or have intermittent operation. This can occur due to normal wear and tear. The icemaker control assembly is attached to the ice maker mold, and is under the white cover. Test the icemaker control assembly by using a multimeter. If this reveals the assembly to be defective, you will need to replace this part. It is approximately 4.25 inches square, beige, and is constructed of plastic and metal. This replacement part features one icemaker control assembly, including the control module and the motor.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Daniel H - April 1, 2023
Verified Purchase
Right part, right time, and easy to replace.
Take out existing part as described, inspect replacement part, install moments later. System starting producing product in under half an hour. After having dumped two filled baskets of ice, did I accept the ready use of the ice. Ice available on demand, delightful.
★★★★★
★★★★★
Billy M - March 25, 2023
Verified Purchase
Easy part to replace
Part was delivered as expected. It did take several hours before the ice maker started making ice.
★★★★★
★★★★★
William R - October 22, 2022
Verified Purchase
Over-priced
The part may be functional, but I was able to purchase the entire icemaker assembly for half the price I paid for this part.
★★★★★
★★★★★
Jacqueline M - August 25, 2022
Verified Purchase
Part ordered was just what we needed
Received part and we got Ice
★★★★★
★★★★★
Susan S - July 30, 2021
Verified Purchase
Super Easy
Super easy installation after watching the video. And it fixed my problem!
★★★★★
★★★★★
Claudette A - July 14, 2021
Verified Purchase
Problem Solved
The part solved my problem perfectly.. We now have ice . It was easy to install thanks to YouTube video. There were no directions accompanying my part.
★★★★★
★★★★★
TRACY E - May 17, 2021
Verified Purchase
Exactly what I needed
Part arrived quickly and packed well. Super easy install and I had ice again within a couple of hours. Thanks for making a mom look really handy!
★★★★★
★★★★★
Herbert J - May 12, 2021
Verified Purchase
Easy repair
Part was perfect fix and very easy to install
★★★★★
★★★★★
Tracey H - April 9, 2021
Verified Purchase
Works great!
Easy to install and works great. We have ice again!
★★★★★
★★★★★
CHARLES W - March 10, 2021
Verified Purchase
Simple repair
Part ordered through PartSelect was exactly right. Quickly delivered and an easy fix. Repair video was once again excellent.
< Prev
1
2
3
Next >
Customer Repair Stories
Average Repair Rating: 4.2 / 5.0, 203 reviews.
What's this?
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Bad module on icemaker
First shut off water supply and unplug power. Unscrew icemaker assembly from side wall with 3 screws. Remove front cap and you can clearly see module. Unscrew and remove module ( only three screws). Install new module and revers procedure to finish up. Ice was ready in just a few hours. Video provided by this site was right on and left
... Read moreno questions.
Read less
Randy from LAFAYETTE, LA
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice maker clicked CW and CCW, but did not make ice
Replaced the control of the ice maker assembly.
Louis from BASKING RIDGE, NJ
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice maker was not making ice
We replaced this part 5 years ago, so we considered ourselves "experienced" at this particular job. We followed the video at your site and after some sticky removal parts, we were able to put the new motor in and finish putting the freezer back in its original shape. After a few worried hours, we again had ice. The video was easy to fol
... Read morelow and we couldn't be happier. Thank you for saving us hundreds of dollars.
Watched a video on YouTube on how to replace the icemaker control assembly. The video showed unplugging power, turning off the water supply, and removing the entire ice maker from the freezer. After watching the video several times, I unplugged the refrigerator but did not turn off the water supply. I did not remover the entire ice mak
... Read moreer from the freezer, but I did remove the wire shut-off arm. After that, I pried off front cover of the control assembly. The control assembly is held in place by 3 Phillips screws; I removed the screws, removed the icemaker control assembly, replaced the assembly with the new one, replace the cover and wire shut-off arm, and plugged the refrigerator back into the wall. Had ice in about an hour (seemed the system had a little delay before deciding to go to work!).
Read less
John from HENRICO, VA
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
1 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No Ice in bin.
Turned off ice maker. Remove one screw with nut driver (1/4") that hold plugin cover. Push the release lock, (up) on bottom of Ice maker to slide unit out enough to unplug and remove ice maker out of freezer. remove white side cover and replace control unit. Reinstall white side cover then plug unit in at freezer and slide unit into locks
... Read more reinstall plugin cover with screw. Turn on ice maker and watch Ice maker start to move and tray to fill with water. Done.
Read less
JOHN from DULUTH, GA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Not making ice
Followed Video Instructions
Floyd from GIRARD, OH
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
was NOT making ice
Your youtube ..order part and fix in 2 mins.AWESOME we had our refrigerator since 1983.... my wife keeps her looking new...& happy with the saving .Our frigerator a MAGIC CHEF..the ice maker is the only thing we have replaced.
Donald from ACWORTH, GA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
ICE MAKER WOULD NOT MAKE ICE
removed the white plate, unscrewed 3 screws and replaced the part.
Alexis from COVE, OR
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No Ice, water was valve working, the ice tray was turning
Installed the icemaker control assembly this corrected the problem suspect contacts on the old unit were not making a good contact over time, due to the damp area in the freezer the new unit corrected the repair easy repair.
Jerry from MERRITT IS, FL
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
2 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
water froze in the cube tray, wouldn't dislodge
replaced icemaker motor.easy peasy
Patrushkha from LOS ANGELES, CA
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
1 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
3
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
65 questions answered by our experts.
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Bruce
August 4, 2017
My freezer is not making ice. How do I know what the problem is.
For model number gz25fsrxyyo
Hi Bruce,
Thank you for the question. I would first check to see if the ice maker is getting water. If no water is entering the ice maker it could be the water valve. You can take a glass of water (enough to fill the ice maker tray) and pour it into the ice maker and wait to see if it makes ice. If no ice is made then you have a problem with the ice maker. If it does make ice then the valve might not be opening up and sending water to the ice maker.
You can also check the water filter. Make sure it has been replaced within the last 6 months. If it becomes clogged or old it can prevent the ice maker from making ice.
Hope this helps!
66 people found this helpful.
Was this helpful?
Thank you for voting!
Chris
March 28, 2018
Ice maker not making ice. I replaced the water valve but still not working. Is there a way i can test the ice maker assembly with a multimeter. I would really like to know exactly what to get and not waste money on unnecessary parts
For model number KSRB25FNSS00
Hi Chris,
Thank you for your question. You cannot use a multi meter unfortunately you would need to have a small piece of insulated wire to test your ice maker. When you remove the ice maker cover that covers the motor, there are two holes at the bottom right hand side of the white wheel on your motor. They are labeled T and H. Place the insulated wire into those two holes and make sure your ice maker is on. If your motor wheel does not start to turn to make ice and bring up your water, then your ice maker is broken and needs to be replaced. Be very careful doing something like this and make sure that you use an insulated wire so that you do not get an electric shock. I hope that helps. Good luck with your repair.
34 people found this helpful.
Was this helpful?
Thank you for voting!
Bill
February 1, 2018
No ice in maker-no water in ice tray-door water dispenser works.
For model number KSRB25FHSS04
Hello Bill, thank you for your question. First I would check to see if the ice maker will make ice if you manually fill it. You can take a glass of water (enough to fill the ice maker tray) and pour it into the ice maker. If no ice is made then you have a problem with the ice maker. If it does finish the cycle and dump the ice into the bucket, then the issue might be the valve. The valve might not be opening up and sending water to the ice maker. You can also check the water filter. Make sure it has been replaced within the last 6 months. If it becomes clogged or old it can prevent the ice maker from making ice. Hope this helps!
19 people found this helpful.
Was this helpful?
Thank you for voting!
Carl
October 18, 2017
Ice maker not dispensing ice. Heard water running to ice maker.Checked later and found that water had dripped down from ice tray onto lower shelves and freezer door. Water is frozen on door and icicles formed on the edges of lower shelf. Could this be a faulty ice ejector motor? Thanks
For model number KSCS25INBL01
Hi Carl, Thank you for the question. It sounds like the ice maker is over filling. This normally means the Water Inlet Valve is not closing properly.You can pour a cup of water into the ice maker and see if it makes ice. If the ice maker works when filling it manually and the water pressure is good going to the appliance, I suggest replacing the water valve. Hope this helps!
My icemaker is overfilling the water. Is there an adjustment for the cube size on the icemaker?
For model number MFF2558VEM10
Hello Pete,
Thanks for your question. The icemaker control assembly affects the size of the ice cubes. There is a plastic screw for the water level adjustment on the right side when you look at the icemaker. Adjust it to adjust the flow of water to the icemaker.
I hope this helps.
11 people found this helpful.
Was this helpful?
Thank you for voting!
Joe
October 30, 2017
Ice maker control light flashing red, no ice, water works, filter has been replaced, frig was emptied for 24 hours.
For model number KSRP25FNSS00
HI Joe, Thank you for the question. I suggest testing the emitter and receiver boards.To test the board you need to open the freezer door and look at the status LED on the right hand side. Make sure the ice maker control is turned “ON”. The status LED should blink twice, pause, and then repeat,blink blink…. pause, blink blink… pause.Next with the freezer door open, hold down the flapper door on the left side to unblock the optics beam. With the optics unblocked, the LED should light up and stay lit with no blinking. If the status LED continues to blink twice , then you have defective optic boards and they will need to be replaced.If there is no LED light on, then the ice maker could be in “harvest” mode. Hold down the freezer light switch, the status LED should flash every second while in harvest mode. If the LED light still does not flash, then the optic control boards will need to be replaced. Hope this helps!
Ice-maker occasionally leaks water inside the freezer along side the ice-maker, and creates solid ice running down the freezer (near the door). Also it stops producing ice and due to an ice cube being stuck in the ice-maker, or frozen ice in the black tube which handles the water.
For model number GD2SHAXNT00
Hello Peter, Thank you for your inquiry. We would recommend checking the following parts to fix your issue: the water inlet valve, the defrost heater, the defrost thermostat, the thermistor, the ice maker control assembly, and the thermostats. You can test the parts with a multimeter. If you are unfamiliar with how a multimeter functions, there are YouTube videos available to assist you. Hope this helps!
9 people found this helpful.
Was this helpful?
Thank you for voting!
Dave
February 25, 2018
Icemaker not making ice i have water to the water dispenser no water to the icemaker. I replace the water filter. I came in and the floor was covered with water but no water comes into the icemaker .
For model number KSRB22FHSS02
Hello Dave, Thank you for your inquiry. We would advised checking the tubing going from the water inlet valve to the icemaker and the and the ice maker water fill tube to see if it is frozen, clogged or cracked. You can also test the ice maker to see if it is functioning properly. To do so, cut a 6- to 8-inch length of 14-gauge solid electrical wire. Use a pair of wire strippers to remove about 1/2 inch of the electrical insulation from each end of the wire. Grab the square cover on the front of your ice maker inside your freezer with your hand. Rock the cover back and forth as you wiggle it away from the front of the ice maker to expose the round gear beneath it. Find two small, round openings marked “H” and “T” beneath the gear. Insert the bare ends of the electrical wire into the openings, so one end of the wire is in one opening and the opposite end is in the other. The wire overrides the timer and manually activates the ice maker. Hope this helps!
8 people found this helpful.
Was this helpful?
Thank you for voting!
Marvin
December 6, 2017
The ice marker is over filling, leaving icicle on both ends. I replaced the water valve but still having same problem. Do i need to replace the unit control ?
For model number ED25DQXAN00
Hi Marvin,
Thank you for your question. If the water pressure is too low, the valve may not close fully when the power is shut off. This will cause the valve leaks water into the ice maker, causing it to overflow. You will need to check the water pressure. The valve requires a minimum of 20 psi to work properly. You will need to also check the ice maker to see if it is working properly as it may be defective. I hope this helps. Thank you and have a great day!
7 people found this helpful.
Was this helpful?
Thank you for voting!
Carl
January 11, 2018
Why does my ice maker not dispense ice from the ice chute? Ice maker works fine making ice but when i try to get ice from the dispenser nothing happens, auger doesn't turn nor does the ice chute door open. Just hear a click when trying to get ice
For model number GD5NHAXSQ00
Hi Carl,
Thank you for your question. If the ice dispenser is not not dispensing ice, you will need to check the dispenser control board. I hope this helps. Thank you and have a great day!
5 people found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
2
3
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
