If the burner element on your range will not heat up, or is damaged, it may need to be replaced. This part is 8 inches in diameter, and should not be confused with the smaller 6-inch model. The part is 220 Volts and 4 Turn. The burner element connects to the terminal block inside the range. To do this repair, simply remove the old surface element and replace it with the new part. This product is sold individually. As the surface element is hot when it is on, be sure to unplug the range from the power source before completing this repair.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
5 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Amey
December 12, 2018
We have 1 burner that randomly gets hot like i have it on 4 and it gets really hot on it's own all the rest of the burners work fine
For model number 79093002312
Hi Amey,
Thank you for your question. If the 8 inch element is getting hotter when you have it on a low setting, the issue is the burner switch that operates it. The part number listed under your model number for the 8 inch burner switch is PS1145040. I hope this helps. Thank you and have a great day!
13 people found this helpful.
Was this helpful?
Thank you for voting!
Patrick
April 5, 2019
My burner is approximately 7 and a quarter inches across, would this be comsidered an 8 inch. Its an older stove and i cannot find a model munber
Hello Patrick, Thank you for the question. The 8" is more so the hole the burner fits into. Hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Stan
October 16, 2019
My Kenmore electric range stove burner seems not working, is this burner okay to replace my broken one?
For model number 63533
Hello Stan, thank you for contacting us, In order for us to locate the correct parts and repair information we will require the full model number of the unit. 63533 is incomplete. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. Look forward to hearing from you!
Was this helpful?
Thank you for voting!
Lisa
November 16, 2022
The bracket supporting my heating element broke off,do i buy the entire element and the bracket is attached? I did nit see individual brackets on this website.
Thanks
For model number FFEF3015LSM
Hello Lisa, thank you for asking. Based on our research, the bracket comes attached to the surface element. You may need to purchase the surface element, part number PS2339241. Please reach out to customer service if you need help placing an order. Glad to be of help!
Was this helpful?
Thank you for voting!
Christopher
12 days ago
Hello, I need to purchase a JENN-AIR surface element both 6 in and 8 in for a model number 2380EGS. The original has the screw holes to re attach the element to the stove wiring to include the ground wire between the post which has a small metal bracket and it too has a tapped screw hole to secure the ground wire to. Do you all have any of these surface elements in that design or do I need to rewire it. Thank you.
For model number 2380EGS
Hello Christopher, thank you for contacting us. According to our research, the part you mentioned is not compatible with your model. The compatible elements with your model are the 6-inch surface burner element, part number PS11757480, and 8-inch surface burner element, part number PS11757481. You do not need to rewire it as these elements are the same as of your old elements. We hope this information helps!
Repair failed because part did not fit. Offset between top of element and contact prongs was too small, so element could not sit flat.
Dan from CHEWELAH, WA
Difficulty Level:
Very Difficult
Total Repair Time:
More than 2 hours
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
My burners were shot!
Pulled out the old, and replaced. Very simple for a 62 year old woman! I cook a lot, being from the country, and Imwas so excited to get my burners fixed! Should have done it years ago! Thanks!
our rental stove needed new drip bowls and heat elements
i at first had a hard time finding the model # on this older electric stove. i did a chat with a rep from partselect.com and they sent me a web site that showed me where to look for it. that helped a lot. found it and searched on partselect.com . they had just what was needed. the purchase was easy and shipping was fast. i was worried it was going to be time consuming finding what i needed, not true once i found their web site. also, installation was easy.
Unpluged old one pluged new one in. So good to have a burner that all the coils heat up.
Arlene from ERIE, IL
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Element would not heat up
I couldn't explain how to do the job any better than your instructional video does. As long as you follow the video instructions you should have no problems.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Rowan M - February 2, 2022
Verified Purchase
Works Great
Shipping was very fast. New element exactly right for my stove. I'm Happy.
★★★★★
★★★★★
Karen T - January 26, 2022
Verified Purchase
Easy replacement parts
Both 8 inch surface elements were received in excellent condition. My stove works perfectly. I love it!
★★★★★
★★★★★
Peggy B - December 8, 2021
Verified Purchase
Surface element - 8 inch replacement burner
The surface element was delivered in a timely manner and was packed adequately for shipment protection. The replacement part was easy to plug in and use - works splendidly. Thank you Part Select, it is nice to have four burners to prepare meals on again. Have a wonderful Christmas and a Prosperous New year.
★★★★★
★★★★★
Billy U - September 1, 2020
Verified Purchase
It's working ok
Working fine
★★★★★
★★★★★
Karen M - July 3, 2020
Verified Purchase
Stove Element
Perfect fit. Works well.
★★★★★
★★★★★
Cynthia R - May 18, 2020
Verified Purchase
It Works
Brand new part. Exactly what I ordered. Fits perfectly. Thank you
★★★★★
★★★★★
Sarah R - May 14, 2020
Verified Purchase
Easiest repair
So easy to order this part then just plug it in and go. This was the exact part I needed and it works great. It’s so nice to be able to use our big burner again
★★★★★
★★★★★
Frederick L S - April 22, 2020
Verified Purchase
Easy for DIY.
Easy to install.
★★★★★
★★★★★
Mona T - April 14, 2020
Verified Purchase
Easy Repair
Thanks my appliance is back in working order.
★★★★★
★★★★★
Kerry A - November 10, 2019
Verified Purchase
Replace heating element
The part came as I ordered. It was a simple replacement. The new element works as it should. I've used partselect for a couple of other orders and have been pleased with those as well.
With the Fix app, you can quickly and easily find information on your appliance, along with videos and articles to help you fix it.
"Like magic. I took a picture of the model number on my refrigerator, and the app identified it right away … Very convenient. I'm impressed." ★★★★★ - Clever Jeff
★★★★★
You added 1 item to your cart
✖
$
Qty:
Total item(s) in cart:
Order Subtotal
$
*Taxes and shipping will be applied during checkout