Oven Safety Valve - Natural Gas WB19K31 | Official GE Part | Fast Shipping | PartSelect
Oven Safety Valve - Natural Gas – Part Number: WB19K31
Oven Safety Valve - Natural Gas – Part Number: WB19K31 Oven Safety Valve - Natural Gas – Part Number: WB19K31 Oven Safety Valve - Natural Gas – Part Number: WB19K31 Oven Safety Valve - Natural Gas – Part Number: WB19K31 https://partselectcom.azureedge.net/Schematics/GE/00107461i01.gif

Oven Safety Valve - Natural Gas

PartSelect Number PS233885

Manufacturer Part Number WB19K31

Manufactured by GE

Product Description

Oven Safety Valve - Natural Gas Specifications

This gas oven safety valve is used in ranges and ovens. The function of the valve is to ensure no gas is released until the igniter has received the proper voltage needed to ignite the gas range, this prevents any safety hazards when cooking or baking. If your device has shorted out and is no longer letting gas out, it is best to replace your safety valve to fix the problem. Remember to unplug your range from the power source before beginning this installation.

How Buying OEM Parts Can Save You Time and Money

Troubleshooting

This part fixes the following symptoms:

Gas igniter glows, but will not light | Will Not Start | Little to no heat when baking

This part works with the following products:

Range.

This part works with the following brands:

General Electric, Hotpoint, Kenmore.

Part # WB19K31 replaces these:

183D5746G001, 247066, AP2022762, WB19K0031, WB19K31.
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer Repair Stories
Average Repair Rating: 4.4 / 5.0, 3 reviews What's this?
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Guadalupe from Stockton, CA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
Parts Used:
WB19K31, WB13K21
Oven not getting hot/no flame no gas.
Step 1. Pull oven out disconnect power,turn off gas & remove gas line from stove.
Step 2. Remove broiler drawer,locate igniter & safety valve.
Step 3. Disconnect 2pin molex connector for igniter and faston connectors from
valve.
Step 4. Use nut driver remove fasteners that hold igniter and valve remove gas line and feed
from valve.
Step 5. Replace valve and igniter.Repeat steps 4-1 and start baking.

Note: You may only need a igniter and not a valve,both were bad on my unit.
Most often it's just the igniter that goes out.
118 of 136 people found this instruction helpful.
Was this instruction helpful to you?
Paul from San Diego, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers, Wrench (Adjustable)
Parts Used:
WB19K31
Igniter lit but valve wouldn't shift
Take the advice that it's the igniter. Even thought the igniter lights, it doesn't mean it passes the correct current to the valve. Too much or too little won't work. I'd suggest changing the igniter first. I used to be in the valve business, that kind of valve lasts millions of cycles. The igniters on the other hand break down after a5-10 years
34 of 38 people found this instruction helpful.
Was this instruction helpful to you?
Max from Aitkin, MN
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers, Screw drivers, Wrench (Adjustable)
Parts Used:
WB19K31
Oven would not light
I found the best was to remove the oven door and the broiller drawer. Then I removed the panel that seperates the two areas. This gave me great access. Next I removed the shield (1 screw) and the burner (3 screws). Then the inlet pipe (don't forget to turn off the gas, as I did). Remove the valve (2 screws)...........Remove the mounting bracket from old valve and install it on the new one. Then it's just a matter of reversing the prior steps and your'e done!
25 of 28 people found this instruction helpful.
Was this instruction helpful to you?
Customer Reviews
Average Rating:
2 Reviews
5
out of 5
Filter By Rating:
  • 5 Stars
    2
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Stars
    0
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Model Cross Reference

This part works with the following models:

PartSelect Number: PS233885
Manufacturer Part Number: WB19K31
Brand
Model Number
Description
Kenmore
36261111699
Range
Kenmore
36261118699
Range
Kenmore
36261120101
Range
Kenmore
36261120102
Range
Kenmore
36261120103
Range
Kenmore
36261120104
Range
Kenmore
36261121890
Range
Kenmore
36261121891
Range
Kenmore
36261121892
Range
Kenmore
36261121893
Range
Kenmore
36261121894
Range
Kenmore
36261121895
Range
Kenmore
36261121896
Range
Kenmore
36261128890
Range
Kenmore
36261128891
Range
Kenmore
36261128892
Range
Kenmore
36261128893
Range
Kenmore
36261128894
Range
Kenmore
36261128895
Range
Kenmore
36271112000
Range
Kenmore
36271112001
Range
Kenmore
36271117000
Range
Kenmore
36271117001
Range
Kenmore
36271161691
Range
Kenmore
36271168691
Range
Kenmore
36271171890
Range
Kenmore
36271171891
Range
Kenmore
36271178890
Range
Kenmore
36271178891
Range
Kenmore
36271330200
Range