HEAT EXCHANGER 297217900

Hello Gene, Thanks for your question. This could be an issue with the run capacitor for your compressor. It may be worthwhile to test that and the heat exchanger with a multimeter to see if they have continuity and replace them if they show no continuity. I hope this helps.

Hello Cameron, Thank you for the question. I suggest testing the Defrost Thermostat,PartSelect Number PS2350702. The best way to do this is to remove the thermostat from the refrigerator so you can control the temperature of the sensor. You can let the sensor warm up to room temperature. With the sensor warmed up to room temperature the sensor should read approximately 6.2K Ohms at 68°F. With the thermistor submerged is a glass full of ice water, the sensor should be very close to 32°F which should read approximately 16.3K Ohms. If the values that you are getting are far off from these readings, then the sensor is bad and should be replaced. Hope this helps!

Hello Rick, thank you for your question. We did not find a Cap Tube, but we do show a Plastic sensor sleeve Tube PS468327. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.

Hello Kelly, thank you for contacting us. Replacing the heat exchangers is not necessary when replacing the evaporator coils. The heat exchanger coils connect the evaporator coils to the condenser coils. It will require considerable disassembly of the refrigerator. We hope this helps.