Also known as the start device/relay. This part briefly boosts the compressor, and then shuts off as soon as the motor gets up to speed.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Freezer.
This part works with the following products:
Frigidaire, Kenmore, Crosley.
Part# 216954214 replaces these:
AP4393070, 1465068, 216954214
Customer Repair Stories
Average Repair Rating: 5.0 / 5.0, 1 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
power surge, burnt out Freezer Main Control Board PS3502429
Used putty knife to pop out old control board. Which is located on the front of the freezer door. The hard part was determining that this was the problem in the first place. I first replaced the compressor controller and the Run Capacitor. compressor still would not start. when I installed the new control board, it ran perfect.
albert jr from Gig Harbor, WA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
THUAN
February 15, 2018
What does the thermistor use for?
For model number LFFU14F5HWC
Hi Thaun,
Thank you for your question. A thermistor or temperature sensor may be used to monitor fresh food and freezer temperatures. The sensor is a small capsule like device that is protected by a plastic shield and will vary in resistance depending on the temperature. The control board uses this information to turn on the compressor and fan circuits as well as to operate the damper control on some models. If a sensor becomes damaged or defective it may incorrectly signal the control board to turn off the compressor and fans and result in warmer than normal fresh food and freezer temperatures. Individual manufacturers may have specific information available to test these sensors, depending on the model involved, and may also provide a fault code on the electronic control board on some models. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
James
April 25, 2018
How do I remove the controller from the compressor
For model number LFFU14F5HWA
Hi James, Thank you for the question. The Controller just pulls off the compressor. You can use a flat head screw driver to pry the controller from the compressor. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
James
April 25, 2018
There was a power surge to this unit in a storm the compressor is hot i have been told this is my most likely problem
For model number LFFU14F5HWA
Hi James, Thank you for contacting us. Yes, this is the most likley the issues. If not the compressor may need to be replaced. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
