Part Location Diagram of 134844410 Frigidaire Selector Knob
See part 4 in the diagram
Replacing your Frigidaire Dryer Selector Knob
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Selector Knob 134844410

 Fits your GLER331AS2!
★★★★★
★★★★★
44 Reviews

Rated by 59 customers 

Really Easy 

Less than 15 mins 

Ratings submitted by customers like you who bought this part.

$ 50.47
  In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your GLER331AS2!
PartSelect Number PS2330885
Manufacturer Part Number 134844410
Manufactured by Frigidaire
Product Description

Selector Knob Specifications

This selector knob, also be known as the laundry appliance control knob, is meant for your washer or dryer. This model is sold individually and takes a D-shaped shaft. The purpose of this part is to attach to the shaft of a rotary or starter switch, which is located on the control panel. To install this part, remove your old selector by grabbing it with a firm grip and pulling it straight off. If the metal insert came off with the old part, pull it off as well, making sure the new knob will have enough room to snap in its place. No tools are required to make this repair.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Part Videos

Replacing your Frigidaire Dryer Selector Knob

Replacing your Frigidaire Dryer Selector Knob
Troubleshooting
This part fixes the following symptoms:
Touchpad does not respond | Will Not Start
This part works with the following products:
Dryer, Washer.
This part works with the following products:
Frigidaire, Westinghouse, Electrolux.
Part# 134844410 replaces these:
AP4339026, 1460965, 134844410, 134034900, 134034910, 134034913
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
44 Reviews
4.7
Filter By Rating:
  • 5 Stars
    40
  • 4 Stars
    0
  • 3 Stars
    2
  • 2 Stars
    0
  • 1 Star
    2
Sort by:
  • 1
  • 2
  • 3
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
  • 2
  • 3
Customer Repair Stories
 Average Repair Rating: 4.7 / 5.0, 59 reviews. What's this?
Sort by:
  • 1
  • 2
  • 3
Sorry, we couldn't find any existing installation instruction that matched.
Broken Timer Knob, Broken Start Knob, Possibly Damaged Start Switch
First, removed the metal access panel by removing screws. (EASY)
Second, pressed the timer knob onto the timer shaft. (EASY)
Third, mounted the start switch to the mounting surface. (A BIT DIFFICULT)

Fourth, pressed the start knob onto the freshly mounted start switch. (EASY)

Fifth, replaced the metal access panel by replacing screws. (EASY)

Dryer now functions like new.
Other Parts Used:
Timer Knob - White with Gray Grip Selector Knob
  • JEREMY from JONESBORO, GA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
knob replacement...
watched you tube video... a breeze
  • Susan from EL PASO, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broken selector knob
Simply pressed knob on appliance.
  • Philip from HAYESVILLE, NC
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken Selector Knob
This repair took only about 15 seconds to complete. It just involved pushing the new knob on the selector. The provided video should give you the confidence to complete this task.. I invested $11.00 for the part. I would hate to see the cost to have a repairman come and fix this. Worth every penny
  • William from Alexandria, IN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
starter switch and knob broken
remove power cord from outlet . remove upper rear panel . remove 2 wires . remove old switch . . install new switch and wires , replace rear panel , install knob , plug in power cord and check dryer operation ok. 5 min job.
Other Parts Used:
Selector Knob Turn - Type Start Switch
  • tor from bridgeton, NJ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Knob on Dryer broke
I ordered the part one day & it arrived the next day(UPS-Ground)I replaced broken knob with new one & everythings just fine. Thank you for your prompt service !!
  • Robert from Clearwater, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
selector knob broke
I ordered replacement knob for washing machine. It arrived by fedex in 3 days. Ordering was easy and transaction went as smooth as it could. I will order again if needed.
  • Gary from Terre Haute, IN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
19 of 609 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broken and worn out knobs
was just a pop off -pop on knob replacement for worn/broken knobs. Easy on ,less than a minute. The BEST part of my repair...finding exactly the parts I needed and fast shipping, also the site for selecting your parts and trouble shooting repairs is extremly customer friendly......highly reoommend your site/services. Thanks
  • Patsy from Wytheville, VA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
1 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Knobs Do Not Fit Securely
Took broken knobs off and replaced with new ones. Only one fit snuggly; the other two are raised and wobbly.
  • Marie from Marlboro, NY
  • Difficulty Level:
    Difficult
  • Total Repair Time:
    Less than 15 mins
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
knobs broke
Just put them on. there wasnt any thing hard to do.
Other Parts Used:
Timer Knob - White with Gray Grip Selector Knob
  • CHANDA from BOGALUSA, LA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
  • 3
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

14 questions answered by our experts.
Sort by:
  • 1
  • 2
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
I Need The Virginia
January 18, 2018
In the video you are replacing the middle knob. Are the 3 knobs all the same? I need the one that starts the dryer- the one on the right.
For model number GLER341ASI
PartSelect logo
Hello Virginia, Thank you for your inquiry. All 3 knobs are the same for this model. Hope this helps!

5 people found this helpful.

Was this helpful?
Thank you for voting!
Kathy
January 7, 2018
Is the selector knob the same as the on knob?
For model number GLER331AS2
PartSelect logo
Hi Kathy, Thank you for the question. The Selector Knob, Part Number: PS2330885 are the two smaller knobs tot he left of the panel. The Timer Knob, Part Number: PS2330897 is the main knob on the right. Hope this helps!

4 people found this helpful.

Was this helpful?
Thank you for voting!
Tim
October 6, 2017
Dryer runs but no heat.Replaced the element still no heat but noticed the selection knob was not advancing. Could this be my problem?
For model number LER7648KQ
PartSelect logo
Hi Tim, Thank you for your question .Yes, it could be. However I would suggest checking your thermal fuse, all of your thermostats, and your door switch as well first. In that order. Those are usually the parts that cause this sort of problem. I hope that helps. Good luck with your repair.

3 people found this helpful.

Was this helpful?
Thank you for voting!
Gene
October 8, 2017
Is this a set of knobs or just an individual knob?
For model number GLGR642AS5
PartSelect logo
Hi Gene, Thank you for your question. This would be just for one knob. They are sold individually. Good luck with your repair.

3 people found this helpful.

Was this helpful?
Thank you for voting!
Katie
December 5, 2018
Our knob broke off, and the spot it was at is now flat with the dryer, and we are unable to turn it on. Would a new knob replacement be what we need?
For model number Ferb5700ds0
PartSelect logo
Hello Katie, Thank you for the question. You will need to replace the switch that the knob fits onto. Please feel free to submit a new question with what the knob controlled or what switch was broken and we will be happy to help you with the correct part number. Looking forward to hearing from you!

3 people found this helpful.

Was this helpful?
Thank you for voting!
Penny
February 10, 2020
My washing machine pull start is broken. Can it be replaced
For model number 127R65E66802816812
PartSelect logo
Hi Penny, Thank you for your question. Before we can assist you further, we would need the model number from your washer. Here is a link from our website that you may reference on where to find the model number on your appliance, https://www.partselect.com/Find-Your-Washer-Model-Number.aspx. We hope this helps. Thank you and have a great day.

2 people found this helpful.

Was this helpful?
Thank you for voting!
Mary Ann
July 20, 2021
The knob to start the dryer broke off. I need to replace the knob. Inside the knob, there are 2 numbers: Kip6uo6 and 1340349. Can you please tell me what part I need to order? My dryer model number is gler642as3
For model number GLER642AS3
PartSelect logo
Hello Mary Ann, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS2330897. We hope this helps!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Jessie
August 19, 2021
My washer and dryer set is a very old model, i’m not sure if this selection knob fit it. Please help check, thank you.
For model number 131495400
PartSelect logo
Hi Jessie, Thank you for your question. To verify the correct knob for your washer, we would need the model number from it. If you could resubmit your question with this information, we would be happy to help you with this. Here is a link where you may find the model number on your washer, https://www.partselect.com/Find-Your-Washer-Model-Number.aspx. If you have any questions, please let us know.

2 people found this helpful.

Was this helpful?
Thank you for voting!
Dawn
November 13, 2021
Hi- I need to replace the starter knob on a Frigidaire washer dryer combo GLGT1031c. It's the 2nd knob from the left hand side, above it says "turn to start". Which knob is the right one for me to buy please? THank you
For model number GLGT1031c
PartSelect logo
Hello Dawn, thank you for writing. We have researched the model you have provided and have found the part you are looking for is PS2330889. We hope this helps.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Joanne
January 20, 2022
The knob on my Electrolux stackable dryer is not triggering the machine to start. It normally clicks to go on.
For model number MEX731CFS0
PartSelect logo
Hi Joanne, Thank you for your question. If the knob is not activating the start switch, then the switch may no longer be working. To verify if the start switch is working, you can test it with a multimeter. We have included a link that you may reference for information on how to test the start switch. The part number listed under your model number for the start switch is PS1146154. If you need to place an order for it, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Additional Links:
  • 1
  • 2
You May Also Need ?
Model Cross Reference
This part works with the following models:
PartSelect Number: PS2330885
Manufacturer Part Number: 134844410
Brand
Model Number
Description
Frigidaire
CFRE5711KW0
Dryer
Frigidaire
CFRE5714KW0
Dryer
Frigidaire
CRER442AS0
Dryer - Residential
Frigidaire
CRER442AS1
Dryer - Residential
Frigidaire
CRER442AS2
Dryer - Residential
Frigidaire
CRER5700AS0
Dryer - Residential
Frigidaire
CRER5700AS1
Dryer - Residential
Frigidaire
CRER7900AS0
Dryer - Residential
Frigidaire
CRER7900AS1
Dryer - Residential
Frigidaire
CRGR442AS0
Dryer - Residential
Frigidaire
CRGR442AS1
Dryer - Residential
Frigidaire
CRGR442AS2
Dryer - Residential
Frigidaire
CRGR5700AS0
Dryer - Residential
Frigidaire
CRGR5700AS1
Dryer - Residential
Frigidaire
CRGR5700AS2
Dryer - Residential
Frigidaire
CRGR5700AS3
Dryer - Residential
Frigidaire
CRGR7900AS0
Dryer - Residential
Frigidaire
CRGR7900AS1
Dryer - Residential
Frigidaire
CRGR7900AS2
Dryer - Residential
Frigidaire
CRGR7900AS3
Dryer - Residential
Frigidaire
CRTR9300AS0
Washer - Residential
Frigidaire
CRWS1879AS0
Washer - Residential
Frigidaire
CRWS1879AS2
Washer - Residential
Frigidaire
CRWS5700AS0
Washer - Residential
Frigidaire
CRWS7900AS0
Washer - Residential
Frigidaire
CRWS7900AS1
Washer - Residential
Electrolux
EKDR14XAKW0
Dryer
Electrolux
ELTW20XAKW0
Washer - Residential
Frigidaire
FER331AS0
Dryer - Residential
Frigidaire
FER331AS1
Dryer - Residential
Customer Service Representative

Get in touch, we're here to help!

Open until 1am EST

Contact Customer Service