Part Location Diagram of W10155344 Whirlpool Diverter Motor with Wire Harness
See part 17 in the diagram
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

customerservice@partselect.com

Diverter Motor with Wire Harness W10155344

★★★★★
★★★★★
1 Review

Rated by 1 customer 

Easy 

1- 2 hours 

Ratings submitted by customers like you who bought this part.

$ 89.58
  In Stock
Get FREE EconoShip on orders over $100! T&C apply

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

Does this part fit my model?

Need help finding your model number?
PartSelect Number PS2328555
Manufacturer Part Number W10155344
Manufactured by Whirlpool
Product Description

Diverter Motor with Wire Harness Specifications

NOTE: This part has been updated by the manufacture and the shaft seal is now incorporated into the sump housing. The seal for diverter motor shaft only available with the pump sump housing.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Leaking | Not cleaning dishes properly
This part works with the following products:
Dishwasher.
This part works with the following products:
Kenmore, KitchenAid, Jenn-Air, Whirlpool.
Part# W10155344 replaces these:
AP4324941, 8579252, W10056349, W10134015, W10155344, W10208691
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
1 Review
5.0
Filter By Rating:
  • 5 Stars
    1
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
Sort by:
  • 1
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
Customer Repair Stories
 Average Repair Rating: 2.8 / 5.0, 1 reviews. What's this?
Sort by:
  • 1
Sorry, we couldn't find any existing installation instruction that matched.
Water leaking underneath dishwasher
The leak was dripping from the diverter motor. After removing dishwasher the diverter motor was found to be corroded. The shaft grommet looked good. A new diverter motor was installed and dishwasher connected. After running it awhile the leak reappeared. It seemed the only possible thing left was the shaft grommet. Of course the grommet comes as part of the belly assembly. After searching for a better and cheaper solution I ordered a Whirlpool WPW10195677 grommet and it solved the leak.
  • John from Springfield, OH
  • Difficulty Level:
    Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Pliers, Wrench (Adjustable)
47 of 55 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

6 questions answered by our experts.
Sort by:
  • 1
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Viv
February 17, 2018
The lower washer arm does not rotate/spin during the wash/rinse cycles.
For model number KUDE60FXWH0
PartSelect logo
Hello Viv, Thank you for your inquiry. Check for any clogs or debris by seeing if the spray arm will turn freely manually. If it doesn't, remove the arm, the screen filter, cover, screw and retaining-cleaning out any debris along the way. Next, check the sump for any clogs or debris. You can test the diverter motor with a multimeter to see if it has continuity, and if not, then replace it. Hope this helps!

3 people found this helpful.

Was this helpful?
Thank you for voting!
Randy
December 17, 2018
Diverter motor i need the rubber seal above that diverter motor can’t find it on the schematic where can i buy this ??
For model number 66513963k014
PartSelect logo
Hi Randy, Thank you for your question. The seal for diverter motor shaft only available with the pump sump housing. I hope this helps. Thank you and have a great day!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Ryan
October 18, 2019
Cycle stops with oversudsing error even when only running water. All research points to diverter motor. During cycle, diverter motor tries to run and clicks. Diverter plate doesn't seem to change position and is in between two openings. Thoughts?
For model number 665.13963K010
PartSelect logo
Hello Ryan, thank you for your question. Yes, based on your description it sounds like the diverter motor should be replaced. I hope this helps.

2 people found this helpful.

Was this helpful?
Thank you for voting!
Robert
May 28, 2019
I have replaced the thermostat and tested the heat element (15 ohms). The dishwasher does not heat the water in the wash cycle but seems to heat in the final rinse cycle and dry cycle
For model number KUDE48FXSS4
PartSelect logo
Hello Robert, Thank you for the question. I suggest running the tap at the sink until the water runs hot before starting the dishwasher cycle. The water that enters your dishwasher must be at the minimum 120 degrees Fahrenheit. Hope this helps!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Daniel
March 8, 2023
hello I am looking for the seal of the and the Diverter Motor of the model of my dishwasher 66513193k902 because it leaks from the diverter motor do you have the two pieces Thank you for your help
For model number 66513193k902
PartSelect logo
Hi Daniel, thank you for your contacting us. The compatible diverter motor for your model is part number PS2328555. The manufacturer has incorporated the seal into the sump housing; order the sump, part number PS2329328, if you need the seal. If you need help placing an order, customer service is open 7 days a week!

Was this helpful?
Thank you for voting!
Related Parts:
John
16 days ago
Dishwasher doesn’t always pump out water after final wash and dry. There is still water sometimes in the tub and even the heating element is submerged. I’ve replaced the pump motor, checked all hoses and filters. Could the OWI cause this?
For model number 66513183K800
PartSelect logo
Hello John, thank you for reaching out. Turbidity sensor can not cause this issue. Clogged or blocked air gap can cause drainage problems in your dishwasher. If you notice any buildup in the sink’s air gap, clean it out and make sure it is tightly secured. If this is not the issue, the diverter motor, part number PS2328555, is bad and not opening the channel to the drain pump. You may need to replace it to fix the issue. We hope this helps, good luck with the repair!

Was this helpful?
Thank you for voting!
  • 1
You May Also Need ?
Model Cross Reference
This part works with the following models:
PartSelect Number: PS2328555
Manufacturer Part Number: W10155344
Brand
Model Number
Description
Kenmore
66513122K700
Dishwasher
Kenmore
66513122K701
Dishwasher
Kenmore
66513122K702
Dishwasher
Kenmore
66513122K703
Dishwasher
Kenmore
66513123K700
Dishwasher
Kenmore
66513123K701
Dishwasher
Kenmore
66513123K702
Dishwasher
Kenmore
66513123K703
Dishwasher
Kenmore
66513124K700
Dishwasher
Kenmore
66513124K701
Dishwasher
Kenmore
66513124K702
Dishwasher
Kenmore
66513124K703
Dishwasher
Kenmore
66513129K700
Dishwasher
Kenmore
66513129K701
Dishwasher
Kenmore
66513129K702
Dishwasher
Kenmore
66513129K703
Dishwasher
Kenmore
66513132K700
Dishwasher
Kenmore
66513132K701
Dishwasher
Kenmore
66513133K700
Dishwasher
Kenmore
66513133K701
Dishwasher
Kenmore
66513139K700
Dishwasher
Kenmore
66513139K701
Dishwasher
Kenmore
66513152K700
Dishwasher
Kenmore
66513152K701
Dishwasher
Kenmore
66513152K702
Dishwasher
Kenmore
66513153K700
Dishwasher
Kenmore
66513153K701
Dishwasher
Kenmore
66513153K702
Dishwasher
Kenmore
66513154K700
Dishwasher
Kenmore
66513154K701
Dishwasher
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

Contact Customer Service