See part 380 in the diagram
( Grid squares measure 1x1 inch )
Surface Burner Terminal Block Kit
$
58.76
In Stock
In Stock
Get this part fast. Average delivery time via standard shipping: 1.8 days.
PartSelect Number PS232606
Manufacturer Part Number WB17X210
Manufactured by
GE
Product Description
Surface Burner Terminal Block Kit Specifications
This is a surface burner terminal block kit, also known as range surface element receptacle, for an oven, range, or stove. The kit comes with the terminal block, mounting clip, and wires. This surface burner terminal block kit connects the wiring harness to the surface elements. It is important to shut off the power to the appliance before starting this repair. You will need to remove all four elements, trim rings, and drip bowls to access the terminal block on your stovetop. This is an OEM replacement part that is sourced from the genuine manufacturer.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Element will not heat
This part works with the following products:
Range, Cooktop, Microwave Oven Combo.
This part works with the following products:
Kenmore, General Electric, Hotpoint, Roper.
Part# WB17X210 replaces these:
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
John
October 29, 2017
It's hard to tell from the picture. Does this kit come with two wires, one for each side of the element? My stove is a very old GE profile spectra 4 burner with oven.
For model number JRP4?WC?6WW
Hi John, Thank you for the question. Yes this kit comes with 2 wires. Hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Katherine
February 18, 2019
Does this kit come with enough parts for all 4 burners
Hello Katherine, Thank you for contacting us. This is a single terminal block kit. Should you need to replace all 4 burner terminal blocks you will need to order a quantity of 4. Have a great day!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Craig
September 9, 2019
Right front 8 inch burner goes red hot whenever it wants to. What is this?
For model number JBP35DMBB
Hi Craig,
Thank you for your question. If your 8 inch burner goes red whenever it wants to then the issue is the burner switch that operates it and it will need to be replaced. The part number listed under your model number for the 8 inch burner switch is PS236750. I hope this helps. Thank you and have a great day!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Robert
October 10, 2017
Can you get the ends for the wires, and use the wires already there?
For model number 9114628791
Hi Robert,
Thank you for your question. Unfortunately you cannot. You would have to replace this part. Good luck with your repair.
2 people found this helpful.
Was this helpful?
Thank you for voting!
MARK
February 13, 2020
How many burners does this fix
Hello Mark, thank you for your question. This Terminal Block kit is for one one Burner Element. I hope this helps.
Was this helpful?
Thank you for voting!
Walker
February 11, 2019
Does this kit work with my model number
For model number jp326wov1ww
Hi Walker,
Thank you for your question. Yes, this kit will work on your cooktop. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
Part Videos
Replacing your Kenmore Range Surface Burner Terminal Block Kit
Customer Repair Stories
Average Repair Rating: 3.5 / 5.0, 2 reviews.
What's this?
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
There was no heat on the coils.
I opened the lid, and found that the terminal blocks were burnt, the wires were melted. I ordered one set of terminal block to replace the burnt one, and it worked. Before I started, I shut off the electricity in the whole house to be safe.
-
Shaohui from East Lansing, MI -
Difficulty Level:Easy -
Total Repair Time:15 - 30 mins -
Tools:Pliers -
Parts Used:WB17X210
46 of 50 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Surface burner coil did not work.
TURN OFF ALL POWER TO KITCHEN. Took off all burner coils and plates below them. Lift hood. Locate part. Remove old part and replace with new part in same way as was previously installed. The wire that comes with the kit is actually too much wire, but just arrange it the best you can and leave it....no big deal. I didn't have a magnet, but needed one. The wire from burner coil to switch runs through a harness which is screwed on to the body of the oven (below the range). Be careful NOT to drop it behind oven when taking it out. I dropped it and took forever to get it. That turned a 20 minuate job into an hour and a half. Otherwise this is an easy job that anyone can do. Refrigerator compressor is next. Have fun.
-
Gregory from Mont Belvieu, TX
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Screw drivers, Socket set
-
Parts Used:WB17X210
22 of 30 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer Reviews
Filter By Rating:
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Richard H - March 13, 2019
Burner terminal
Received the part quickly by mail and was in good condition.
We have repaired the stove and it works great. My stove is
about 20 years old and do appreciate being able to order parts
and great service you provided.
Marie R - May 30, 2018
Top notch quality replacement part.
Received the (4) surface burner terminal kits quickly. The quality was first class and worked very well in the repair of my stovetop unit. I will never order a part from Sears Part Direct ever again. Dealing with them was a total nightmare. It is very reassuring to know that companies with integrity such as your company are still out there. Thanks again. ??
Cory W M - February 15, 2018
Easy repair
Quick service, easy part to replace.
Model Cross Reference
This part works with the following models:
PartSelect Number: PS232606
Manufacturer Part Number: WB17X210
Manufacturer Part Number: WB17X210
Brand
Model Number
Description