GE/GE_Thumb/00125340i01.gif
See part 4 in the diagram
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Double Burner Assembly

★★★★★
★★★★★
7 Reviews

Rated by 24 customers 

Really Easy 

Less than 15 mins 

Ratings submitted by customers like you who bought this part.

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your 3626101190!
 Fits your 3626101190!
PartSelect Number PS232404
Manufacturer Part Number WB16K10026
Manufactured by GE
Product Description

Double Burner Assembly Specifications

Both burners are mounted on the same bracket.
How Buying OEM Parts Can Save You Time and Money play video

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Gas igniter glows | but will not light | Will Not Start | Element will not heat
This part works with the following products:
Range.
This part works with the following products:
General Electric, Hotpoint, Kenmore.
Part# WB16K10026 replaces these:
AP2633210, 868697, WB16K10026, 65932, WB16K10003, WB29K0001, WB29K0017, WB29K1, WB29K17
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

7 questions answered by our experts.
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jesus
November 12, 2017
Does this part work on my lp stove..or does it have to be natural gas?
For model number jgbs04bpm1wh
Hi Jesus, Thank you for the question. As long as you are using the LP orifices this burner will work with LP. Good luck with the repair!

4 people found this helpful.

Was this helpful?
Thank you for voting!
Morgan
October 27, 2021
How do you clean these?
Hello Morgan, thank you for your question. Remove the caps and the burner heads by carefully lifting them straight up. Avoid damaging the ignition electrode if you have one. Soak the burner heads and caps in soap and warm water for 30 minutes. Scrub buildup from the burner heads and caps using a non-abrasive scrub pad and an old toothbrush. We hope this helps.

2 people found this helpful.

Was this helpful?
Thank you for voting!
Donna
February 19, 2019
Are these for 8,000 but propain
For model number Jgbso4pph2wh
Hello Donna, Thank you for contacting us. As long as you are using the liquid propane orifices this burner assembly will work. Hope this helps!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Fabrizio
May 8, 2019
Do i need new burners? Bottom of my cook ware gets black
For model number Rgb508peh7wh
Hi Fabrizio, Thank you for your question. The burners for your model come in an assembly. The part number listed under your model number for the double burner assembly is PS232404. I hope this helps. Thank you and have a great day!

Was this helpful?
Thank you for voting!
Fabrizio
May 8, 2019
I wander if i need new burners, my pots getting black on the bottom when i use the burners
Hello Fabrizio, thank you for contacting us. That may be possible. We can locate the correct Burners for you if you can provide the model number for your unit. We look forward to hearing back from you.

Was this helpful?
Thank you for voting!
Jyde
September 5, 2019
Can i buy and use bigger burners for my stove? Is so which do you recommend?Thanks
For model number JGBS10DEK1BB
Hello Jyde, thank you for your question. Unfortunately, the only burners we have listed that are guaranteed to be the correct replacements are the same ones that originally came on the unit. I hope this helps!

Was this helpful?
Thank you for voting!
James
December 27, 2021
GE Range JGBS07PEH1WW. Looking for the part number for a stovetop burner knob and valve. The valve stem broke of into the knob.
For model number JGBS07PEH1WW
Hello James, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is Part #: PS952138 for the Knob and Part #: PS2353505 for the Range Surface Burner Valve. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!

Was this helpful?
Thank you for voting!
Related Parts:
Customer Repair Stories
 Average Repair Rating: 4.8 / 5.0, 24 reviews. What's this?
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
My old burners were beyond the point of coming clean and made my stove top look bad.
My husband and I simply took the burner units out of the packing, took the old ones off, put the new ones in. The new units needed to be leveled, but the leveling nuts included fit perfectly, and the entire repair took less than 15 minutes.
  • Helen from Flemington, NJ
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
23 of 29 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
two of the burners were not working at all, the other two were blackening pots and pans
I turned off the gas flow to the appliance, removed the old oriface spuds with the adjustable wrench, inserted the new oriface spuds and tightened them with the adjustable wrench. The double burner assembly just dropped on. They fit perfectly. I did not have to use the leveling nuts that were included with the burners. The old levelers were still in place and set perfectly for the new burners. Very easy repair, and the range works like a new one.
Other Parts Used:
Liquid Propane Orifice Spud
  • Callie from Bay, AR
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Wrench (Adjustable)
19 of 28 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Burners were burning the pans and flames coming out at all different angles of the burner
The toughest part of the repair was the preparation to remove the old burners. As a result of the burning there was a carbon residue on the burners, on the gas outlet feed to the burners. This took some scrubbing and removing the carbon residue. Bits had burned onto the outlet and had to be scrapped off. Once all cleaned, replacing the burners was easy just had to place the balancing nuts in place and put on the burners. One problem arose the hood of the stove did not go back in place after replacing the burners so I then removed the balancing nuts put back on the burners stove top hood fit back in place and burners operated properly. This part of the repair took five minutes.
  • ANNE from HICKSVILLE, NY
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
13 of 15 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Burners very old / needed to replace
Very easy! Open the top of the stove, remove the old double burner and place the new one! Anyone can do it! It's that easy... :)
  • Debbie from Santa Clara, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
9 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The burner assembly seemed to be rusting some and had become not easy to clean. The grates had just become dirty and unable to clean so they were changed out for ascethetic reasons only.
I ordered the parts on line and they came very quickly through the mail. The burner assembly came with instructions for the installation of a nut. Everything was great - from the order to the delivery to the installation.
Other Parts Used:
Burner Grate
  • Thomas from Traverse City, MI
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
6 of 12 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
old burner not firing properly
ordered parts, 2 double burners, 3 days later they arrived.opened box.
lift stove top, lift out old burner,placed next to new burner to see if they were the same. THEY WERE. place in new burner, checked to see if burner assembly fit correctly. IT DID.
units purchased were exact replacements. supplied spacer nuts not needed.
easy fix looks new again, thanks.
  • Michael from New Paltz, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
4 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Burners could no longer be cleaned.
Lifted the top and dropped in the new burners. Realized they always should have had the leveling washers provided so I took the burners off, dropped on the leveling washers and dropped the burners back on. This all took about 2 minutes. Really made the range top look a lot nicer.
  • Richard from San Diego, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Rusted & Dirty Burners
I moved to an apartment where the past tenants did not take care of the stove. I think this stove is 10+ years old and looks like it was never cleaned in all of its existance! I cleaned everything really well with oven cleaner and lots of scrubbing. The stove looked brand new except the burners! I couldn't take it anymore so I ordered new ones. The burners came in less time than stated. I opened the box, took the burners out, lifted the oven hood and just placed them right where the others were. There are no tools needed it pretty much just gets placed down in the appropriate spot and that's that! No directions or tools needed. My stove looks awesome now!! When you first use the burners, you will probably need to place a match or lighter by the burner to get the fire going. After that, it lights perfectly every time.
  • Tara from Bronx, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Burner was old and needed replacing
Took it out of the box, lifted the stove lid and replaced the part, no tools required. Very satisfied with the shipping and the part, great service. Thanks!
  • Debbie from Giddings, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The pipe that carry the gas to the ignition part was damaged, therefore the burner was not lightening up.
Just have to remove the old kit and replace it with the new one. No tool required.
  • Hyojin from Monmouth Junction, NJ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
2 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer Reviews
Average Rating:
★★★★★
★★★★★
7 Reviews
4.7
Filter By Rating:
  • 5 Stars
    5
  • 4 Stars
    2
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Model Cross Reference
This part works with the following models:
PartSelect Number: PS232404
Manufacturer Part Number: WB16K10026
Brand
Model Number
Description
Kenmore
3626101190
Range
Kenmore
3626101191
Range
Kenmore
3626101192
Range
Kenmore
3626101194
Range
Kenmore
3626101195
Range
Kenmore
3626101196
Range
Kenmore
3626101197
Range
Kenmore
3626101890
Range
Kenmore
3626101891
Range
Kenmore
3626101892
Range
Kenmore
3626101894
Range
Kenmore
3626101895
Range
Kenmore
3626101896
Range
Kenmore
3626101897
Range
Kenmore
36261020101
Range
Kenmore
36261020102
Range
Kenmore
36261020103
Range
Kenmore
36261021890
Range
Kenmore
36261021891
Range
Kenmore
36261021892
Range
Kenmore
36261021893
Range
Kenmore
36261021894
Range
Kenmore
36261028890
Range
Kenmore
36261028891
Range
Kenmore
36261028892
Range
Kenmore
36261028893
Range
Kenmore
36261028894
Range
Kenmore
36261061690
Range
Kenmore
36261111699
Range
Kenmore
3626111190
Range

Get in touch, we're here to help!

Open until 1am EST

Contact Customer Service