Part Location Diagram of WB07K10250 GE Bottom Trim - White
See part 359 in the diagram
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

customerservice@partselect.com

Bottom Trim - White WB07K10250

 Fits your 10571-2!
★★★★★
★★★★★
14 Reviews

Rated by 8 customers 

Really Easy 

15 - 30 mins 

Ratings submitted by customers like you who bought this part.

$ 25.43
  In Stock
Get FREE EconoShip on orders over $100! T&C apply

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your 10571-2!
PartSelect Number PS2321159
Manufacturer Part Number WB07K10250
Manufactured by GE
Product Description

Bottom Trim - White Specifications

Screws not included.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part works with the following products:
Range.
This part works with the following products:
General Electric, Hotpoint, Kenmore.
Part# WB07K10250 replaces these:
AP4343842, 1394337, WB07K0384, WB07X7190, WB07X7198, WB7K384, WB7X7190, WB7X7198
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
14 Reviews
4.7
Filter By Rating:
  • 5 Stars
    12
  • 4 Stars
    1
  • 3 Stars
    0
  • 2 Stars
    1
  • 1 Star
    0
Sort by:
  • 1
  • 2
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
  • 2
Customer Repair Stories
 Average Repair Rating: 4.4 / 5.0, 8 reviews. What's this?
Sort by:
  • 1
Sorry, we couldn't find any existing installation instruction that matched.
RUSTED TRIM PEICE
REMOVED THE DOOR, TOOK THE SCREWS OUT OF THE BOTTOM AND REPLACED THE TRIM. IT TOOK CARE TO GET THE TRIM OVER THE GLASS ON THE DOOR. IT WENT RIGHT ON AND LOOKS LIKE NEW.
Other Parts Used:
PANEL DRAWER Bottom Trim - White
  • Katheryn from BEACON FALLS, CT
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Bottom trim piece on 24 year old stove had rusted. Replace trim piece was still available.
Very simple. Lift oven door off brackets and set on floor. Remove sheet metal screws holding on existing trim piece, Clean area beneath trim.
Put new trim piece on, don't tighten any of the screws until all have been started as some adjustment is needed to align the holes for the screws.
  • Donald from FAYETTEVILLE, NY
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Socket set
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Part rusted over time...22 years.
Unscrewed eight screws. Removed rusted part. Cleaned area with Windex. Replaced new part.
  • Jeannene from HUNTINGTON, TX
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The trim piece on the bottom of the door was rusted making the unit look really dirty and used.
It was pretty simple. Just remove the door as the bottom piece holds all the parts together. Place on table top and remove old trim. Install new trim and install door. The only difficult part was the trim had a space for the glass door front. I opened up the space so that the glass would seat easier. Went together real easy. Stove looks like it's brand new.
  • Glenn from West Melbourne, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
bottom trim had rusted, so we needed new piece
Removed oven door (made sure hinges were locked open and stayed open). Remove part on top of trim, removed rusted trim and replaced with new trim. Replaced part on top of trim and screwed all back together. Put oven door back on and unlocked hinges. It was easier than the trial run (when I hadn't realized that the hinges weren't locked open!)
  • Robin from Apple Valley, MN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Socket set
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
bottom trim had rusted out from water build-up
disassembled bottom trim on oven door.cleaned area of excess rust and installed trim piece.
  • john from buford, GA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Socket set
3 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
rusted trim strip
remove screws, re-install screws
  • Larry from Sarasota, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Socket set
3 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
replaced more for cosmetic reasons
Your support team helped tremendously in ordering the parts. Parts arrived in only 2 days. Upon taking the door off the oven we had to remove several screws, then more screws. Was able to take it almost fully apart, replace old broken parts with new. Putting it back together was like a puzzle. We did it though and saved money! Thanks
Other Parts Used:
Bottom Trim - White TRIM VENT & CLIP White
  • Glenda from Port Richey, FL
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Screw drivers
4 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

2 questions answered by our experts.
Sort by:
  • 1
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Andres
February 27, 2019
Do you have this part in black
PartSelect logo
Hello Andres, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS2321142. Thank you for your inquiry, good luck with this repair!

Was this helpful?
Thank you for voting!
Related Parts:
Terry
February 3, 2020
I have a Kenmore gas range the outer glass door shattered can you get a replacement or is it better to just buy a new oven
PartSelect logo
Hi Terry. You can usually get a replacement much less than the cost of a new range. Please provide us with your model number and we can find the part for you. Thank you for your question and good luck with your repair.

Was this helpful?
Thank you for voting!
  • 1
Model Cross Reference
This part works with the following models:
PartSelect Number: PS2321159
Manufacturer Part Number: WB07K10250
Brand
Model Number
Description
General Electric
10461-1
Range
General Electric
10461-2
Range
General Electric
10461-3
Range
General Electric
10471-1
Range
General Electric
10471-2
Range
General Electric
10471-3
Range
General Electric
10481-1
Range
General Electric
10481-2
Range
General Electric
10481-3
Range
General Electric
10561-1
Range
General Electric
10561-2
Range
General Electric
10561-3
Range
General Electric
10571-1
Range
General Electric
10571-2
Range
General Electric
10571-3
Range
General Electric
10581-1
Range
General Electric
10581-2
Range
General Electric
10581-3
Range
General Electric
10671-1
Range
General Electric
10671-2
Range
General Electric
10671-3
Range
General Electric
10771-1
Range
General Electric
10771-2
Range
General Electric
10771-3
Range
General Electric
10781-1
Range
General Electric
10791-1
Range
General Electric
10791-2
Range
General Electric
11791-2
Range
General Electric
11791-3
Range
General Electric
12451-1
Range
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

Contact Customer Service