Door Handle WB15X10022

Hello Rigoberto, Thank you for the question. Here is some information that a customer has left on our website as to how they installed the part, "With a #2 flathead screw driver pry loose the plastic screen from the INSIDE of the door. With a #1 cross tip screw driver remove the top and bottom screw from the broken handle. Remove broken handle and replace with new handle. Replace the top and bottom screw, then press the plastic screen back in. All finshed." I hope this helps. Thank you and have a great day!

Hi Laurent, Thank you for your question. Here is some information on installing a microwave door handle that you may reference on how to take the microwave door apart. Before you begin any repair please unplug the appliance from the electrical outlet. You will need to remove the plastic lining around the inside of the door. There are retainer clips holding the liner in place and you will need to use a putty knife to remove it. Depending on the type of microwave you have, you may have to come in from the bottom or from the top to remove the lining. Gently slide the putty knife in between the lining and the frame and go around the frame and gently pry it loose. On the hinge side you will need to come in from the backside to pry the lining off. If after you remove the lining you only see 2 screws, unthread them to see if the handle will come off. If it does not come off, you will have to remove the inside door panel in the same way you removed the lining. Once removed, unthread the remaining 2 screws and remove the old handle. Install the new door handle and reinstall both the inner door panel and the lining. Restore power to the microwave and everything should now work for you. I hope this helps. Thank you and have a great day!

Hello Paulina, thank you for your question. The manufacturer of this appliance did not make the handle a separate replaceable part. The handle was only available as part of the whole door assembly part number WB55X10208. Unfortunately, the manufacturer has discontinued production on this part, and we have no stock left over. I hope this information helps.

Hi Shirley, Thank you for writing. The Grease Filter for this model would be PartSelect Number PS255242, however the Touch Pad has been discontinued sorry. Our suggestion here would be to call the manufacturer and see if they can provide you with a substitution for these part numbers and contact us back with the updated substitution number. We hope this helps!

Hi Daniela, Thank you for your question. The part number of the handle for your microwave is PS232100. I hope this helps. Thank you and have a great day!

Hi Eldon, Thank you for your question. The handle for your microwave is in stock and the part number for it is PS1480981. Here is some information that a customer has left on our website as to how they installed the part, "With a #2 flathead screw driver pry loose the plastic screen from the INSIDE of the door. With a #1 cross tip screw driver remove the top and bottom screw from the broken handle. Remove broken handle and replace with new handle. Replace the top and bottom screw, then press the plastic screen back in. All finshed." I hope this helps. Thank you and have a great day!

Hi Elvera, this handle takes screws which sadly aren't included, this repair can be done on your own. Thank you for your question and good luck with your repair!

Hello Lynn, Thanks for your question. This door handle is compatible with your model. I hope this helps!

Hi Ray, Thank you for your question. Yes, this is the correct handle for your microwave. I hope this helps. Thank you and have a great day!

Hello Cynthia, Thank you for contacting us. I have researched the model you have provided and have found the handle is only sold as part of the door assembly. I looked up the part and it is listed as No Longer Available/Discontinued. There is no part substitutions listed. My suggestion here would be to call the manufacturer and see if they can provide you with a substitution for these part numbers. Hope this helps!