GE/GE_Thumb/00106627i02.gif
See part 110 in the diagram
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Burner Spark Module - 120V 60Hz

★★★★★
★★★★★
2 Reviews
$125.50   In Stock

Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS231281
Manufacturer Part Number WB13K25
Manufactured by GE
Product Description

Burner Spark Module - 120V 60Hz Specifications

This part sends enough current to the igniter to create a spark to the bottom of the burner cap.
How Buying OEM Parts Can Save You Time and Money play video

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Will Not Start | Gas igniter glows | but will not light
This part works with the following products:
Range, Cooktop.
This part works with the following products:
General Electric, Kenmore, Hotpoint.
Part# WB13K25 replaces these:
AP2020570, 244920, WB13K0025
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

17 questions answered by our experts.
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Debra
September 29, 2017
None of the top burners will light, and the typical clicking noise before the burner ignites isn't present. Do I just need the ignitors, or should I also replace the ignitor module? Thank you!
For model number C2S980SEM3SS
Hi Debra, Thank you for the question. If none of the cooktop burners are making the click noise and are not igniting you will need to replace the harness with all the switches that sit behind the knobs, PartSelect Number PS2321327. This harness has all the small square switching that make the click noise to create the spark to igniter the burners. They are all attached to the same harness so if one is defective or the harness becomes defective all the switches will stop working. Hope this helps!

9 people found this helpful.

Was this helpful?
Thank you for voting!
Mike
February 12, 2018
With all knobs in the "off" position, the stove will send random ignition sparks. Is that caused by a bad spark module or some other wiring problem?
For model number JGP336BEV2BB
Hi Mike, Thank you for your question. If the burners are sparking sporadically on their own, then the issue is likely with the either the spark module or one of the gas valve switches and you will need to check the parts to see which one is causing the issue. I hope this helps. Thank you and have a great day!

5 people found this helpful.

Was this helpful?
Thank you for voting!
Rei
September 25, 2017
I have main burner problem, it only had one spark every time I turn on the valve, all other valve works fine (has continue sparks for ignition). I would like to know the problem was caused by the spark module or the valve?
For model number JGP336WEV4WW
Hi Rei, Thank you for the question. I suggest replacing the Surface Burner Spark Electrode, PartSelect Number PS231276. This part helps your burner ignite and produce flame. Hope this helps!

4 people found this helpful.

Was this helpful?
Thank you for voting!
SCOTTY
April 25, 2018
Out of 4 stove top burners 3 light up with no problem upon turning the oven knobs. The right rear one will only light via match . ? Is this a spark module problem or is it a top burner spark electrode issue
For model number RGB745WEH2WW
Hello Scotty, thank you for your question. The most likely issue is the electrode itself. If its just the one burner that has to be lit with a match I would recommend replacing the burner electrode part number Top Burner Spark Electrode PartSelect Number: PS952858. Good luck with your repair!

4 people found this helpful.

Was this helpful?
Thank you for voting!
Scotty
April 25, 2018
All top burners light "except" one. The right rear burner doesn't spark and only lights via match. All other ones spark and light up with no problem..
For model number RGB745WEH2WW
Hi Scotty, Thank you for the question. I suggest replacing the Top Burner Spark Electrode for the burner that is not lighting, PartSelect Number: PS952858. Hope this helps!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Robert
June 12, 2019
After I have turned all the burners off after use, occasionally I will hear the click like something is trying to light. What could this be? Spark module?
For model number RGB745WEA8WW
Hello Robert, Thank you for the question. I suggest starting with the Burner Ignition Switch,PartSelect Number PS236544 first. If the Switch is good you may need to replace the Burner Spark Module PartSelect Number PS231281. Hope this helps!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Alex
December 13, 2019
Some food boiled over on my gas stovetop. Cleaned stove top with damp towel and now all 4 burners won't click to ignite. Able to still light with a match, gas is flowing but no click from any of them anymore and they all worked just minutes before this incident.Is the primary issue most likely with the spark module or with the wiring harness? which should i try to replace first?
For model number JGP932BEC1BB
Hello Alex, thank you for your question. The first part we would recommend replacing is the spark module as this is located under the top. If that doesn't fix the issue, the ignition switches would have to be replaced. I hope this helps!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Mark
February 5, 2020
My gas cook top trips gfci when plugged in. I know it doesn't have to be plugged into a gfci, but that is how the outlet below the cook top was wired. Any idea if this would be spark module harness or switches? This is a follow up from yesterday's questions with the full model number. Thanks
For model number Kenmore 911.32385890
Hello and thank you for writing. Yes, Mark, I remember your question. My concern with this gfci plus is that it might be too sensitive and therefore trips which would cause you to change parts that are not really defective, however if this problem is new and the unit was working fine before your only option would be to replace the spark module PS231276 as the wiring harness for the unit is NLA. You can, however, follow the wires and connections (in the harness)to make sure they have not become loose or brittle. We hope this helps. Please contact us anytime if you require further assistance.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Frank
February 5, 2018
Burners do not click therefore do not light they will light via match only. What part numbers do i need thank you
For model number JGBP33CEH3CC
Hello Frank, thank you for your question. I would recommend replacing the spark module. If none of the burners are lighting the most likely issue is the module. I hope this helps!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Arnie
November 7, 2017
This is a follow-up to my rear burner not clicking when the switch is set to lite but the front one does (front one also clicks when its switch is set to lite). Why would this happen if not the burner ignitor module?
For model number JGBP35BEA7BB
Hi Arnie, Thank you for the question. The Burner Ignition Switch is the part that makes the click noise. If the other burners make the click noise and it is just the one burner then the module shoudl be fine.Hope this helps!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Customer Repair Stories
 Average Repair Rating: 4.1 / 5.0, 8 reviews. What's this?
    Sort by:
    Sorry, we couldn't find any existing installation instruction that matched.
    Top four burners on oven would not light without using match
    Really simple..Opened the top of the oven and followed the four wires hooked to the igniters on the burners to the back of the oven. Unscrewed top section in back of oven. Found spark module screwed to uppper back of oven on right side. Used a nutdriver to take a few screws out of upper back of oven. Unscrewed spark module from oven. There are six wires - four to the burners and two to the power supply....Wires are attached by connectors so didn't have to do anything but pull the connectors off the old spark module one at a time and push them onto the new spark module matching postion of each wire. Screwed spark module back onto back of oven. Screwed back section of oven back onto rear of oven, and that was it. Works perfectly. Saved more than $100 for service call and whatever elevated price they'd charge me for the spark module.
    • David from Logansport, IN
    • Difficulty Level:
      Really Easy
    • Total Repair Time:
      15 - 30 mins
    • Tools:
      Nutdriver
    61 of 74 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    two of four burners ignited
    replaced all four top burner spark electrodes. the same two still didnt work. I had also purchased spark module and that did fix the problem. Lifting the cook top was difficult. I was afraid of breaking the sealed burners. Note there are directions in envelope on the back side of the stove. /use pliers to remove connectors from module. >Getting the top open was the hardest and most time consuming.
    Other Parts Used:
    Top Burner Spark Electrode
    • Michael from Eastchester, NY
    • Difficulty Level:
      A Bit Difficult
    • Total Repair Time:
      30 - 60 mins
    • Tools:
      Nutdriver
    26 of 35 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    Spark was present in only two of four burners
    Repair was quite easy. Remove four screws and lay back sheet metal panel. Transfer wires from one module to the other and then put new module in place. replaced the sheetmetal panel. Spark now presen at all burners. One small thing worth mentioning. Each burner has a gas distrubution cap and that cap has a small hole to the spark cavity. One of these was pluged with grease and that kept the burner from lighting until this hole was cleared.
    • Paul from Maurertown, VA
    • Difficulty Level:
      Really Easy
    • Total Repair Time:
      Less than 15 mins
    • Tools:
      Nutdriver
    11 of 14 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    stove top burner ignition spark progressively got weaker and then stopped on all but one burner.
    I located the igniter module by following the wires to the top/rear of the stove. Removed two sheet metal guards and marked and numbered each electrical wire before removing them. Reasembled in reverse order. Wife thinks I'm a genius!
    • George from Villa Park, IL
    • Difficulty Level:
      Easy
    • Total Repair Time:
      30 - 60 mins
    • Tools:
      Nutdriver, Pliers
    6 of 8 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    Only one burner sparking on range.
    Removed spark module only two small nuts. Inside was six wires on terminal. Removed one by one and connected right to the new module. Easy job 10 minutes and finished.
    • Ronald from Freehold, NJ
    • Difficulty Level:
      Really Easy
    • Total Repair Time:
      Less than 15 mins
    • Tools:
      Nutdriver, Pliers
    6 of 11 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    2 burners wouldnt spark
    Took top off, removed wires from old spark module and put them on new one. Very easy and quick, works very well now.
    • chadd from philadelphia, PA
    • Difficulty Level:
      Really Easy
    • Total Repair Time:
      15 - 30 mins
    • Tools:
      Nutdriver
    5 of 7 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    Burners began to fail to ignite.
    Removed six screws on the back panel. Just switched six wires from the old to the new module. Stove burners work perfectly now.
    • michael from new hope, PA
    • Difficulty Level:
      Easy
    • Total Repair Time:
      15 - 30 mins
    • Tools:
      Screw drivers
    3 of 5 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    Range burners would not light
    Lift up work light cover. Remove lamp. Remove two screws from control panel. Lift up control panel. Pop out spark module from slots. Remove the 6 wires from module. Attach wires to new module - module has a diagram on it that shows where wires are attached. Push new module back into slots. Replace control panel cover, lamp, and work light. Now the burners light - the spark is MUCH stronger than before repair.
    • Gregory from Washington, NC
    • Difficulty Level:
      Really Easy
    • Total Repair Time:
      Less than 15 mins
    • Tools:
      Screw drivers
    2 of 3 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
      Customer Reviews
      Average Rating:
      ★★★★★
      ★★★★★
      2 Reviews
      5.0
      Filter By Rating:
      • 5 Stars
        2
      • 4 Stars
        0
      • 3 Stars
        0
      • 2 Stars
        0
      • 1 Star
        0
        Sort by:
        Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
          Model Cross Reference
          This part works with the following models:
          PartSelect Number: PS231281
          Manufacturer Part Number: WB13K25
          Brand
          Model Number
          Description
          Kenmore
          36272181890
          Range
          Kenmore
          36272181891
          Range
          Kenmore
          36272188890
          Range
          Kenmore
          36272188891
          Range
          Kenmore
          36272191890
          Range
          Kenmore
          36272191891
          Range
          Kenmore
          36272191892
          Range
          Kenmore
          36272198890
          Range
          Kenmore
          36272198891
          Range
          Kenmore
          36272198892
          Range
          Kenmore
          36272201890
          Range
          Kenmore
          36272201891
          Range
          Kenmore
          36272201892
          Range
          Kenmore
          36272201893
          Range
          Kenmore
          36272205891
          Range
          Kenmore
          36272205892
          Range
          Kenmore
          36272205893
          Range
          Kenmore
          36272206891
          Range
          Kenmore
          36272206892
          Range
          Kenmore
          36272206893
          Range
          Kenmore
          36272208891
          Range
          Kenmore
          36272208892
          Range
          Kenmore
          36272208893
          Range
          Kenmore
          36272210101
          Range
          Kenmore
          36272210102
          Range
          Kenmore
          36272211101
          Range
          Kenmore
          36272211102
          Range
          Kenmore
          36272212101
          Range
          Kenmore
          36272212102
          Range
          Kenmore
          36272214101
          Range

          Get in touch, we're here to help!

          Open until 1am EST

          Contact Customer Service