GE/GE_Thumb/00008692i02.gif
See part 154 in the diagram
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Surface Burner Spark Electrode

★★★★★
★★★★★
2 Reviews

Rated by 6 customers 

Really Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your 91136669690!
 Fits your 91136669690!
PartSelect Number PS231276
Manufacturer Part Number WB13K18
Manufactured by GE
Product Description

Surface Burner Spark Electrode Specifications

This part helps your burner ignite and produce flame.
How Buying OEM Parts Can Save You Time and Money play video

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Will Not Start | Gas igniter glows | but will not light
This part works with the following products:
Range, Cooktop.
This part works with the following products:
General Electric, Kenmore, Hotpoint.
Part# WB13K18 replaces these:
AP2020568, 244916, WB13K0018
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

9 questions answered by our experts.
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
BEN
February 5, 2018
Electrode igniter for front large burner. Can igniter be replaced from the top by somehow removing existing igniter adjacent to burner base and if possible ,what holds existing in place
For model number JGP963SEK2SS Grate gas Stove top
Hello Ben, thank you for your question. This repair is very easy. Another customer provided us this information: I removed the burner head and the Burner Cap , no tools are needed to remove these items. I pulled the igniter up far enough to get to the wire, disconnected and connected the new igniter put it back in place, reassembled the two parts plugged it back in and turned it on and it worked. I hope this helps!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Raymond
November 6, 2017
Replaced wb13k18 electrode in front right burner. Intermittent sparking continues . Is it the switch, the spark module or something else?? how to determine?
Hi Raymond, Thank you for your question. I would suggest testing your switch next with a multi meter to see if that is the part that is giving you the problem. If that part is fine, it may be your spark module that is the issue. You can also test that part with a multi meter as well. Good luck with your repair.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Steve
June 19, 2019
One of my electrodes will not spark...it will light with match or by turning another burner on lite setting so i ordered a new spark electrode...while waiting for shipment i decided to swap it for a different electrode but that same burner still won't spark...do i need a different part
For model number Jgbp30aew1aa
Hello Steve, thank you for writing. You will want to consider either the Round Style Oven Igniter part PS243425 or the Burner Spark Module part PS231281 for your model. This Surface Burner Spark Electrode part PS231276 is the correct replacement for your model. We hope this helps.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Tajinder
June 25, 2019
Do you have a video showing replacement of spark igniter. Problem - there is no ticking sound and burner does not light, though you can smell the gas.Or do you think there is a different problem
For model number JGP336WEV3WW
Hello Tajinder, Thank you for the question. Here is a link that may help you. The appliance might be a bit different but will have the same basic steps. Hope this helps! https://www.youtube.com/watch?v=37D_vhIT7q8&t=44s

1 person found this helpful.

Was this helpful?
Thank you for voting!
Joel
September 3, 2019
Igniter on cooktop stays on (clicking). How do I fix it?
For model number JGP930SED1SS
Hello Joel, Thank you for the question. The Gas Valve Switch PartSelect Number PS236791 is normally the part that makes the clicking noise. I suggest checking this part with a multi meter or the Spark Electrode to see if they are defective. Hope this helps!

Was this helpful?
Thank you for voting!
Brian
October 12, 2021
Cooktop is making a popping/clicking sound every few seconds. Mainly when moister outside is high. Stops for awhile and starts back up again. Gas GE profile 5 burner cooktop.
For model number JGP636BEV3BB
Hello Brian, Thank you for the question. This could indicate the Burner heads need to be cleaned and the added moisture on humid days could make the need to be cleaned more evident. We hope this helps!

Was this helpful?
Thank you for voting!
B.Banaitis
December 19, 2017
When i depress the control knob and turn, it starts to click and starts the Flame and sometimes it doesn't do anything.
For model number JGP930
Hello, Thank you for your inquiry. I would also advise you to check the spark module and the gas valve switch as well. Hope this helps!

Was this helpful?
Thank you for voting!
Petey
March 3, 2018
The electronic igniters keep clicking and the stove is not on. Can you help?
For model number JGSP44WEY8WW
Hello Petey, Thanks for your question. You may want to test the spark electrodes with a multimeter for electrical continuity. Replace them if they do not show continuity. You may also want to test the switches from the wire harness. I hope this helps.

Was this helpful?
Thank you for voting!
Related Parts:
Mr. Edwards
April 17, 2019
I am looking for the spark igniters for a GE stove
For model number JGBS23CEL2CC
Hello Mr. Edwards, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number: PS952858. Thank you for your inquiry, good luck with this repair!

Was this helpful?
Thank you for voting!
Related Parts:
Customer Repair Stories
 Average Repair Rating: 3.6 / 5.0, 6 reviews. What's this?
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Burner igniter needed to be replaced
Assumed the entire top of the range would have to be lifted off. Removed the three screws inside the top of the over door and then noticed the two screws holding the dish around the burner. They were tight and required WD-40 and then a sharp tap and came off.
Important: Notice the direction your old igniter is plugged into the wire. It is not clear and can go on either way.
  • Thomas from Bloomsbury, NJ
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
37 of 62 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Front(gas) burners won't light
After the parts arrived.Unplugged the stove,and sarted taking a stove apart ,removing (4 torkx screws)from the top,disconnected electrical wires from electrod, and burner
swith,(4ps).left&rigth front tube was installed.also replaced four electrod.Put everything back together with caution plug stove back in, and now,works like new,for
other14 years or longer.If you can do the above you can save
your self a bundle.
Thank you parts dept for the good sevice.Happy new year
Other Parts Used:
Left Front Tube and Orifice Kit Right Front Tube and Orifice Kit VALVE BURNER
  • Jozsef from Port Orchard, WA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Pliers, Screw drivers, Wrench (Adjustable)
10 of 18 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broken spark ignitor/ broken spray arm holder
removed burners from cooktop, hardest part was to lift glass top because of the double back tape holding unit to counter, replaced damaged ignitor clip and reinstalled with new one, placed all parts back, job done.
On dishwasher it was as simple as using nut driver to drive 8/16 self tapping screw onto new part and checking for arm rotating without hitting anything. done. thanks guys!
Other Parts Used:
Middle Spray Arm Kit Screw 8-16 hxw 1/2 Stainless Steel Spray Arm Bearing Spark Electrode Mounting Clip
  • George from Palmdale, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
10 of 23 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven igniter failed; electrode has been spotty for years.
STOVE Much easier to perform than expected. First, pull the plug. Second, lift door off hinges and remove bottom storage door. Then remove bottom tray (2 thumbscrews) and the head spreader below that (1 screw). Now disattach the two wire nuts that attach the igniter to electric (from bottom, where door was). I guess this has been changed once. If it had not been, might have had to cut these lines. Then, back inside the stove, remove the flame delivery tube or whatever it's called. It kind of twists as it pulls up. From there, it's easy to disattach the igniter with a wrench and then reassemble all in reverse order. Hardest part was getting one of the wire nuts to take. One of the replacement ones just did not grab, so reused one of the preexisting.
OVEN Only hard part was getting the stovetop to release. Take off all the burner guards and such. Then lift the top slightly to locate the two push clips. Push each back in turn with a screwdriver, and this releases the stovetop, which rises up until it rests on two rests. Piece of cake to remove th electrode and attach new one.
All working fine!
Other Parts Used:
Round Style Oven Igniter
  • PAUL from Montpelier, VT
  • Difficulty Level:
    Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Screw drivers
5 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Electrode ceramic insulator was cracked
First I elevated range top, then removed cracked electride from connector pin. Installed new electrode and lowered range top and all was fine.
  • Robert from Irvine, KY
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
4 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
would not ignite
It was so easy.I removed the old part with the new with pliers. Voila/// it worked.
  • Terry from Longmont, CO
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
1 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer Reviews
Average Rating:
★★★★★
★★★★★
2 Reviews
5.0
Filter By Rating:
  • 5 Stars
    2
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Model Cross Reference
This part works with the following models:
PartSelect Number: PS231276
Manufacturer Part Number: WB13K18
Brand
Model Number
Description
Kenmore
36272291790
Range
Kenmore
36272295790
Range
Kenmore
36272296790
Range
Kenmore
36272298790
Range
Kenmore
36272671790
Range
Kenmore
36272675790
Range
Kenmore
36272676790
Range
Kenmore
36272678790
Range
Kenmore
3627516190
Range
Kenmore
3627516191
Range
Kenmore
3627516192
Range
Kenmore
3627516890
Range
Kenmore
3627516891
Range
Kenmore
3627516892
Range
Kenmore
36275171790
Range
Kenmore
36275181690
Range
Kenmore
36275181691
Range
Kenmore
36275181692
Range
Kenmore
36275188690
Range
Kenmore
36275188691
Range
Kenmore
36275188692
Range
Kenmore
3627526190
Range
Kenmore
3627526191
Range
Kenmore
3627526192
Range
Kenmore
3627526890
Range
Kenmore
3627526891
Range
Kenmore
36275271690
Range
Kenmore
36275271691
Range
Kenmore
36275271692
Range
Kenmore
36275275690
Range

Get in touch, we're here to help!

Open until 1am EST

Contact Customer Service